Correlation between surface roughness and AE signals in ceramic grinding based on spectral analysis

¹ School of Engineering, São Paulo State University–UNESP, Bauru, São Paulo, Brazil.
² School of Mechanical Engineering, Federal University of Uberlandia –UFU, Uberlandia, MG, Brazil.

Abstract

The study and monitoring of the workpiece surface roughness is one of the most important parameters of the grinding process. This paper proposes a method for analysing the surface condition of ground ceramic components by means of the acoustic emission (AE) signal analysis along with frequency domain techniques. Tests were performed using a surface-grinding machine equipped with a resin-bond diamond grinding wheel, where signals were collected at 2 MHz. Alumina workpieces were machined under six different depth of cut values, covering slight, medium and severe grinding conditions. Frequency content was studied in order to select bands closely related to the process conditions. An analysis of the root mean square values (RMS) of the signals was performed, seeking for a correlation with the surface roughness. Digital filters were applied to the raw signals. The RMS values filtered for two frequency bands presented a better fitting to the linear regression, which is highly desirable for setting a threshold to detect the workpiece surface conditions and implementing into a monitoring system. Results showed that the amplitude of the signals presented different characteristics in the frequency domain according to the workpiece surface condition. It was also observed a higher spectral activity in the severe grinding conditions.