| Issue |
MATEC Web Conf.
Volume 220, 2018
2018 The 2nd International Conference on Mechanical, System and Control Engineering (ICMSC 2018)
|
|
|---|---|---|
| Article Number | 01003 | |
| Number of page(s) | 6 | |
| Section | Functional Material Design and Modeling | |
| DOI | https://doi.org/10.1051/matecconf/201822001003 | |
| Published online | 29 October 2018 | |
Investigation of Hydro-piercing Method for Stainless Steels by Finite Element Method
1 Department of Mechanical Engineering, Selcuk University, Konya, Turkey
2 Department of Mechanical Engineering Nigde Omer Halisdemir University, Nigde, Turkey
3 Nigde Omer Halisdemir University Prof. Dr. T. Nejat Veziroglu Clean Energy Research Center, Nigde, Turkey
4 Technical Sciences Vocational School of Higher Education, Selcuk University, Konya, Turkey
Researches and studies on hydroforming process, which is a method that is getting more and more popular every day thanks to its many advantages in application, are ongoing. It is possible to pierce- the holes on a tube or sheet hydroformed part using hydropiercing method after the forming operation. In this study, hydropiercing process of a 304 stainless steel is simulated via the LS-Dyna in 2D axial symmetry model. In the simulations two types of punch movement was investigated to determine the contribution to the burr formation. In the simulations, Jonson-Cook hardening and damage model were used to determine the initiation of the crack on the samples. As a result, the burr formation can be eliminated by the two step movement of the punch through the piercing operation.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.