| Issue |
MATEC Web Conf.
Volume 188, 2018
5th International Conference of Engineering Against Failure (ICEAF-V 2018)
|
|
|---|---|---|
| Article Number | 04013 | |
| Number of page(s) | 8 | |
| Section | Design of Components and Engineering Elements, Coatings, Failure Analysis | |
| DOI | https://doi.org/10.1051/matecconf/201818804013 | |
| Published online | 07 August 2018 | |
A test method for the determination of the peel resistance of the bonded rubber lining of conveyor belt metal drums
Department of Mechanical Engineering and Industrial Design, University of Applied Sciences of West Macedonia,
Kozani,
Greece.
* Corresponding author: sofiapapan@gmail.com
A test method for the peel resistance of the bonded rubber lining of large of large conveyor belt metal drums is presented that will assist engineer in designing conveyor systems with predetermined specifications. A simple specimen preparation method is developed and the peel strength of the liming is measured using a modified version of the Standard EN 28510-1:2014, 'Adhesives-Peel test for a flexible-bonded-to-rigid test specimen assembly' [1]. The method was applied to various types of samples and it was found that only metal drums where the rubber lining was bonded using hot-vulcanisation under pressure satisfied the condition of the peel force greater than 2 N/m.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.