| Issue |
MATEC Web Conf.
Volume 168, 2018
XXI. International Scientific Conference - The Application of Experimental and Numerical Methods in Fluid Mechanics and Energy 2018 (AEaNMiFMaE-2018)
|
|
|---|---|---|
| Article Number | 07016 | |
| Number of page(s) | 6 | |
| Section | Special Experimental Methods in Fluid Mechanics and Energy | |
| DOI | https://doi.org/10.1051/matecconf/201816807016 | |
| Published online | 23 May 2018 | |
Impact of oxygen enhanced combustion of natural gas on thermal efficiency of combustion aggregate
Technical university of Kosice, Faculty of Materials, Metallurgy and Recycling, Institute of Metallurgy, Department of thermal technology and gas industry, 042 00 Letná 9/A Kosice, Slovakia
* Corresponding author: robert.dzurnak@tuke.sk
The aim of the present article is to present the achieved results on the experimental combustion aggregate. In the experimental measurement, the increased of the oxygen concentration in the oxidizing agent in the combustion of natural gas has been used. The results presented in this article are focused to achieve the thermal efficiency of the device, which is expressed by useful heat of the combustion aggregate. Part of the article is the analysis of the heating heat exchanger based on heat flow by convection and radiation and CFD mode of heat exchanger
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.