Issue |
MATEC Web Conf.
Volume 168, 2018
XXI. International Scientific Conference - The Application of Experimental and Numerical Methods in Fluid Mechanics and Energy 2018 (AEaNMiFMaE-2018)
|
|
---|---|---|
Article Number | 07014 | |
Number of page(s) | 5 | |
Section | Special Experimental Methods in Fluid Mechanics and Energy | |
DOI | https://doi.org/10.1051/matecconf/201816807014 | |
Published online | 23 May 2018 |
Experimental Modelling of Autoignition Temperature for Alkyl/Alkenyl Products from Fischer-Tropsch Synthesis
1
Energy Research Centre, VSB-TU Ostrava, 708 33 Ostrava - Poruba, Czech Republic
* Corresponding author: jan.skrinsky@vsb.cz
Interest in Fischer-Tropsch technology is increasing rapidly. Alkyl/alkenyl products from Fischer-Tropsch synthesis are alternative, renewable, environmentally and economically attractive fuels and there are considered one of the most favorable fuels for conventional fossil-based fuels. The chemistry of this gas-to-liquid industry converts synthesis gas containing carbon monoxide and hydrogen to oxygenated hydrocarbons such as alcohols. The fire hazards associated with the use of these liquid hydrocarbons mixtures are obvious. This article aims to explore the fundamental fire and explosion characteristics for main products composition from Fischer-Tropsch synthesis.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.