Issue |
MATEC Web Conf.
Volume 165, 2018
12th International Fatigue Congress (FATIGUE 2018)
|
|
---|---|---|
Article Number | 10018 | |
Number of page(s) | 8 | |
Section | Fatigue of Structures / Vibrations / in Service Fatigue Failures | |
DOI | https://doi.org/10.1051/matecconf/201816510018 | |
Published online | 25 May 2018 |
Mean stress effect in stress-life fatigue prediction re-evaluated
Department of Mechanics, Biomechanics and Mechatronics, Faculty of Mechanical Engineering, Czech Technical University in Prague, Technická 4, 166 07 Prague 6, Czech Republic
* Corresponding author: jan.papuga@fs.cvut.cz, papuga@pragtic.com
The paper compares various methods for computing the equivalent stress amplitude for stress cycles of non-zero mean value in stress-life fatigue prediction. A set of 11 calculation methods is evaluated. In addition to formulations based on common static or fatigue properties, the Walker formula and the generalized Linear formula are included in the investigation. These two methods use an optimization routine to find the material parameters. The final response of the methods is compared and discussed. The Walker method provides a better solution. The generalized Linear method produces inferior results, i.e. the linear fit of the segment of the Haigh diagram is not an optimal solution.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.