Issue |
MATEC Web Conf.
Volume 162, 2018
The 3rd International Conference on Buildings, Construction and Environmental Engineering, BCEE3-2017
|
|
---|---|---|
Article Number | 01006 | |
Number of page(s) | 7 | |
Section | Geotechnical and Transportation Engineering | |
DOI | https://doi.org/10.1051/matecconf/201816201006 | |
Published online | 07 May 2018 |
Stabilization of soft clayey soils with sawdust ashes
Building and Construction Engineering Department, University of Technology, Baghdad, Iraq
* Corresponding author: husn_irq@yahoo.com
The problems of soft clayey soils are taken in considerations by many Iraqi geologists and civil engineers, because about 35% of the Iraqi clay soils (especially southern Iraq) are weak. Thus, it is necessary to improve the properties of such soils for road construction by means of using of various stabilizers such as sawdust ash. The main goal of the present study is to stabilize soft clay models with sawdust ash (SDA) additive using different percentages (0, 2, 4, 6, 8 and 10% by dry weight of soil). The results revealed that the additive has adverse effects on the property of soil indices by increasing its liquid limit and plasticity index due to clay content. The mixture of sawdust ashes with soft clay soils improves most other physical and mechanical properties of the soil, as expressed by a general reduction in specific gravity and maximum dry density (MDD), as well as a reduction in the compression coefficients (Cc and Cr) with an increase in SDA content. While increasing the optimum moisture content (OMC) and the undrained shear strength (cu) with the increase in SDA content. The stabilized soils (with 4 and 10% ash content) resulted in low CBR values (1.6-1.2%) which can be used as sub-base. The SDA can be considered as a cheap and acceptable stabilizing agent in road construction for improving most of the geotechnical properties of the soft clayey soil.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.