| Issue |
MATEC Web Conf.
Volume 157, 2018
Machine Modelling and Simulations 2017 (MMS 2017)
|
|
|---|---|---|
| Article Number | 05002 | |
| Number of page(s) | 8 | |
| Section | Experimental mechanics, identification and validation | |
| DOI | https://doi.org/10.1051/matecconf/201815705002 | |
| Published online | 14 March 2018 | |
Analysis of the porous bone-implant fixation – experimental verification of numerical model
1
Poznan University of Technology, ul. Piotrowo 3, 61-666 Poznań, Poland
2
The Rail Vehicles Institute “TABOR”, ul.Warszawska 181, 61-055 Poznań, Poland
* Corresponding author: maciej.berdychowski@put.poznan.pl
In this paper a new type of endoprothesis THRA with needle-palisade fixation system has been described. A numerical model of such fixation has been created. The developed model was subjected to experimental verification. During the test, the prototype of the needle palisade structure was inserted into the cancellous bone. The test results were compared with numerical simulation.
Key words: bone / implant / numerical model / bone-implant connection
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.