| Issue |
MATEC Web Conf.
Volume 95, 2017
2016 the 3rd International Conference on Mechatronics and Mechanical Engineering (ICMME 2016)
|
|
|---|---|---|
| Article Number | 13006 | |
| Number of page(s) | 4 | |
| Section | Mechatronics | |
| DOI | https://doi.org/10.1051/matecconf/20179513006 | |
| Published online | 09 February 2017 | |
Error Compensation on Probe Parameters of Articulated Arm CMM
Jinggangshan University College of Mechanical & Electrical Engineering, Ji’an, 343009, China
The error compensations on probe parameters were proposed to improve the measurement accuracy of an articulated arm coordinate measuring machines (AACMM). An AACMM’s probe parameters were analyzed and a measurement model including probe parameters solely was built. A simple cone socket components were used as a calibration tool and the LM algorithm was edited to solve the probe parameters. The results show that the average measurement error dealt with the probe parameters recalibration is 0.044mm, and its standard deviation is 0.050mm. They have increased by about 31% and 33% than those without recalibration.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.