| Issue |
MATEC Web Conf.
Volume 73, 2016
XV International Conference “Topical Problems of Architecture, Civil Engineering, Energy Efficiency and Ecology – 2016”
|
|
|---|---|---|
| Article Number | 02014 | |
| Number of page(s) | 7 | |
| Section | Energy Efficiency, Renewable Energy Sources, “Green” Buildings and Sustainable Development | |
| DOI | https://doi.org/10.1051/matecconf/20167302014 | |
| Published online | 11 August 2016 | |
Thermal Stability Influence of the Enclosure Structure on the Building’s Energy Efficiency
Peter the Great Saint-Petersburg Polytechnic University, 195251, Polytechnicheskaya str. 29, St. Petersburg, Russia
Thermal stability of the enclosure structures is one of the most important objective in the building design. Thermal processes in the wall depend not only on the internal and external air temperature, but also on many other factors. Therefore, complexity of this process make heat conservation in the room to be an actual problem. This paper presents dependence between thermal stability of the enclosure structure and its design. It was shown that thermophysical characteristics of materials directly affect the thermal processes in the wall. For the research, three frequently used types of enclosure structure in Russia were taken. For each wall was found the average temperature and cooling time. As a result, it was found that the higher values of thermal conductivity, specific heat and material density are, the higher average temperature of the wall is.
© The Authors, published by EDP Sciences, 2016
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.