| Issue |
MATEC Web Conf.
Volume 63, 2016
2016 International Conference on Mechatronics, Manufacturing and Materials Engineering (MMME 2016)
|
|
|---|---|---|
| Article Number | 02022 | |
| Number of page(s) | 6 | |
| Section | Manufacturing and Design Science | |
| DOI | https://doi.org/10.1051/matecconf/20166302022 | |
| Published online | 12 July 2016 | |
Experimental Study on Tribological Properties of Laser Textured 45 Steel Surface
1 school of mechanical and electrical engineering, Jiangsu Normal University, 221116 Xuzhou, China
2 school of mechanical and electrical engineering, China University of Mining and Technology, 221116 Xuzhou, China
a Corresponding author: lizhipeng_19910122@163.com
In order to study the influence of pits’ size parameters on the tribological properties of textured friction pairs, using the Nd:YAG laser micro machining system and the “single pulse at the same point, interval more times” processing technics to process the pits on the surface of 45 steel. The dimension parameters of pits texture were obtained by orthogonal experimental design. The tribological experiment of GCr15 pin/45 steel disc was carried out by UMT-2 test machine. The surface morphology of the specimens was analyzed by using scanning electron microscopy. The experimental results show that the pits texture on the surface of 45 steel can effectively reduce the friction coefficient and the wear on the condition of oil-rich lubrication. The textured specimen with diameter 60μm, depth 6μm and surface density 10% has the lowest friction coefficient, and the friction coefficient is reduced by 21% compared with the smooth specimen. By analyzing the wear morphology on the surface of 45 steel, it is found that the surface of pits texture can obviously reduce the wear.
Key words: Surface micro-texture / Orthogonal experimental design / Lubrication / Tribological properties
© Owned by the authors, published by EDP Sciences, 2016
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.