Open Access
MATEC Web of Conferences
Volume 57, 2016
4th International Conference on Advancements in Engineering & Technology (ICAET-2016)
Article Number 03006
Number of page(s) 5
Section Mechanical & Civil Engineering
Published online 11 May 2016
  1. S. H. lee, X. P. Li: [2001], ―Study of the effect of machining parameters on the machining characteristics in electrical discharge machining of tungsten carbide‖; Journal of material Processing Technology 115, pp 344-358. [CrossRef]
  2. C. COGUN, S. Akaslan [2002], ― The effect of machining parameters on Tool edge wear & machining performance in EDM‖ KSME International Journal, vol, 16, No.1,pp 46-59
  3. S.H. Lee∗, X. Li, [2003] ―Study of the surface integrity of the machined workpiece in the EDM of tungsten carbide”; Journal of Materials Processing Technology 139, pp 315–321 [CrossRef]
  4. P.M. George, B.K. Raghunath , L.M. Manocha, A. M. Warrier [2003] ―EDM machining of carbon–carbon composite—a Taguchi approach‖, Journal of Materials Processing Technology, vol. 145, pp 66–71 [CrossRef]
  5. N. Tosun, C. Cogun, A. Inan [2003] ―The Effect of Cutting Parameters on Workpiece Surface Roughness in Wire EDM,‖ Machining Science and Technology, vol. 7, pp. 209–219 [CrossRef]
  6. I. Puertas, C.J. Luis [2003] ―A study on the machining parameters optimisation of electrical discharge machining‖ Journal of Materials Processing Technology, Vol. 143 pp-521–526. [CrossRef]
  7. S.S Mahapatra, A. Patniak [2006] ―Optimization of wire electrical discharge machining (WEDM) process parameters using Taguchi method‖ International Journal of Advance Manufacturing Technology
  8. H.K. Kansal, S. Singh , P. Kumar [2007] ―Technology and research developments in powder mixed electric discharge machining (PMEDM)” Journal of Materials Processing Technology, vol. 184, pp 32-41 [CrossRef]
  9. K. Furutani, H. Sato, M. Suzuki [2008] ―Influence of electrical conditions on performance of electrical discharge machining with powder suspended in working oil for titanium carbide deposition process‖ Int J Adv Manuf Technol , vol. 40, pp 1093–1101 [CrossRef]
  10. J. Kapoor, S. Singh & J.S. Khamba [2010] ―Recent Developments in Wire Electrodes for High Performance WEDM‖ Proceedings of the World Congress on Engineering 2010 Vol II WCE 2010, June 30 - July 2, 2010, London, U.K.
  11. M.P. Jahan, M.Rahman, Y.S.Wong [2011]: ―A review on the conventional and micro-electrodischarge machining of tungsten carbide”; International Journal of Machine Tools & Manufacture 51 837–858
  12. A. Klinka, Y.B. Guoa, F. Klockea [2011] ―Surface integrity evolution of powder metallurgical tool steel by main cut and finishing trim cuts in wire-EDM‖, 1st CIRP Conference on Surface Integrity (CSI) Procedia Engineering 19, pp 178 – 183
  13. H. Singh, D.K. Shukla [2012]: ―Optimizing electric discharge machining parameters for tungsten-carbide utilizing thermo-mathematical modelling”; International Journal of Thermal Sciences 59 (2012) 161-175 [CrossRef]
  14. E.Aliakbari, H. Baseri [2012]―Optimization of machining parameters in rotary EDM process by using the Taguchi method‖ Int J Adv Manuf Technol, Vol. 62, pp 1041-1053 [CrossRef]
  15. D.Kanagarajan, K.Palanikumar, R.Karthikeyan [2012] ―Effect of Electrical Discharge Machining on strength and reliability of WC–30%Co composite‖ Materials and Design 39 , pp 469–474 [CrossRef]
  16. A.V. Shayan, R.A. Afza, R. Teimouri [2013]: ―Parametric study along with selection of optimal solutions in dry wire cut machining of cemented tungsten carbide (WC-Co)”; Journal of Manufacturing Processes 15 644–658 [CrossRef]
  17. K.P. Rajurkar, M.M. Sundaram, A.P. Malshe [2013] ―Review of Electrochemical and Electrodischarge Machining‖, The Seventeenth CIRP Conference on Electro Physical and Chemical Machining (ISEM) Procedia CIRP 6 13-26
  18. S. Assarzadeh*, M. Ghoreishi [2013] ―Statistical modeling and optimization of process parameters in electro-discharge machining of cobalt-bonded tungsten carbide composite (WC/6%Co)‖ The Seventeenth CIRP Conference on Electro Physical and Chemical Machining (ISEM) pp 463 – 468
  19. R. Demellayer*, J. Richard [2013] ―High precision electro discharge machining of Molybdenum and Tungsten‖ The Seventeenth CIRP Conference on Electro Physical and Chemical Machining (ISEM), Procedia CIRP 6, pp 89 – 94