Article references

Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

The temperature distribution during heating in hot plate welding process

Krzysztof Wałęsa, Ireneusz Malujda, Jan Górecki, Dominik Wilczyński

MATEC Web Conf., 254 (2019) 02033

Published online: 2019-01-15

DOI: https://doi.org/10.1051/matecconf/201925402033

This article has been cited by the following article(s):

Experimental research of the thermoplastic belt plasticizing process in the hot plate welding

K Wałęsa, I Malujda and D Wilczyński
IOP Conference Series: Materials Science and Engineering 776 012011 (2020)
DOI: 10.1088/1757-899X/776/1/012011
See this article

The study of mechanical properties of magnetorheological elastomers under compressive stress

M Kukla, A Fierek, M Berdychowski and M Kończak
IOP Conference Series: Materials Science and Engineering 776 (1) 012097 (2020)
DOI: 10.1088/1757-899X/776/1/012097
See this article

The design issues of rolling bearing assemblies

K Talaśka, D Wojtkowiak and A Fierek
IOP Conference Series: Materials Science and Engineering 776 (1) 012054 (2020)
DOI: 10.1088/1757-899X/776/1/012054
See this article

The influence of the limit stress value on the sublimation rate during the dry ice densification process

J Górecki, A Fierek, K Talaśka and K Wałęsa
IOP Conference Series: Materials Science and Engineering 776 (1) 012072 (2020)
DOI: 10.1088/1757-899X/776/1/012072
See this article

The application of the Finite Element Method analysis in the process of designing the punching die for belt perforation

D Wojtkowiak, K Talaśka and A Fierek
IOP Conference Series: Materials Science and Engineering 776 (1) 012057 (2020)
DOI: 10.1088/1757-899X/776/1/012057
See this article

Multifactor analysis of experiment parameters on the example of the biomass cutting process

D Wilczyński
IOP Conference Series: Materials Science and Engineering 776 (1) 012013 (2020)
DOI: 10.1088/1757-899X/776/1/012013
See this article

Experimental research of the mechanical properties of the round drive belts made of thermoplastic elastomer

K Wałęsa, I Malujda and J Górecki
IOP Conference Series: Materials Science and Engineering 776 012107 (2020)
DOI: 10.1088/1757-899X/776/1/012107
See this article

Preliminary research of strength of glued connections of plastic elements

A Fierek, I Malujda, D Wilczyński and K Wałęsa
IOP Conference Series: Materials Science and Engineering 776 (1) 012027 (2020)
DOI: 10.1088/1757-899X/776/1/012027
See this article

Analysis of threaded connections under impact load

K Talaśka and D Wojtkowiak
IOP Conference Series: Materials Science and Engineering 776 (1) 012052 (2020)
DOI: 10.1088/1757-899X/776/1/012052
See this article

Process Analysis of the Hot Plate Welding of Drive Belts

Krzysztof Wałęsa, Ireneusz Malujda, Krzysztof Talaśka and Dominik Wilczyński
Acta Mechanica et Automatica 14 (2) 84 (2020)
DOI: 10.2478/ama-2020-0012
See this article

Testing functional features of V-belt transmissions

P Krawiec, M Pajtášová, F Meler and Ł Warguła
IOP Conference Series: Materials Science and Engineering 776 (1) 012008 (2020)
DOI: 10.1088/1757-899X/776/1/012008
See this article

Development of a Testing Station for Empirical Verification of the Algebraic Model of Dry Ice Piston Extrusion

Jan Górecki
Acta Mechanica et Automatica 15 (3) 107 (2021)
DOI: 10.2478/ama-2021-0015
See this article

Shaping the Parameters of Cylindrical Belt Surface in the Joint Area

Krzysztof Wałęsa, Ireneusz Malujda and Dominik Wilczyński
Acta Mechanica et Automatica 13 (4) 255 (2019)
DOI: 10.2478/ama-2019-0035
See this article

Preliminary analysis of the sensitivity of the algebraic dry ice agglomeration model using multi-channel dies to change their geometrical parameters

J Górecki
IOP Conference Series: Materials Science and Engineering 776 (1) 012030 (2020)
DOI: 10.1088/1757-899X/776/1/012030
See this article

Analysis of the guiding column and sleeve cooperation in the linear slide bearing of the punching die head-punch block

D Wojtkowiak, K Talaśka and M Berdychowski
IOP Conference Series: Materials Science and Engineering 776 (1) 012055 (2020)
DOI: 10.1088/1757-899X/776/1/012055
See this article

Experimental approach to modeling of the plasticizing operation in the hot plate welding process

Krzysztof Wałęsa, Krzysztof Talaśka, Dominik Wilczyński, Jan Górecki and Dominik Wojtkowiak
Archives of Civil and Mechanical Engineering 22 (1) (2022)
DOI: 10.1007/s43452-021-00336-x
See this article