Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

In-situ experimental investigation using chemical-assisted rotary ultrasonic drilling process on fragile material

Ankit Sharma, Vivek Jain and Dheeraj Gupta
International Journal on Interactive Design and Manufacturing (IJIDeM) (2024)
https://doi.org/10.1007/s12008-024-01760-y

Fatigue enhancement and hardening effect through ultrasonic vibration‐assisted ball‐burnishing process on AISI 1045 steel

Eric Velázquez‐Corral, Jordi Llumà, Ramón Jerez‐Mesa, Vincent Wagner, Gilles Dessein and J. Antonio Travieso‐Rodriguez
Fatigue & Fracture of Engineering Materials & Structures 47 (1) 203 (2024)
https://doi.org/10.1111/ffe.14180

Investigation of mechanical properties and microstructure characterisation of MMA-MIG-TIG-SAW welded EN8 steel joints via shot blasting method

Atul Babbar, Sangam Garg, Vivek Jain and Vinod Kumar Singla
Journal of Adhesion Science and Technology 38 (11) 2000 (2024)
https://doi.org/10.1080/01694243.2023.2283974

Minimum quality lubricant (MQL) for ultraprecision machining of titanium nitride-coated carbide inserts: sustainable Manufacturing process

Amrinder Singh Uppal, Ankit Sharma, Atul Babbar, Kamaljeet Singh and Anoop Kumar Singh
International Journal on Interactive Design and Manufacturing (IJIDeM) (2023)
https://doi.org/10.1007/s12008-023-01299-4

Machining of ceramic materials: a state-of-the-art review

Ankit Sharma, Atul Babbar, Yebing Tian, Bhargav Prajwal Pathri, Manish Gupta and Rajesh Singh
International Journal on Interactive Design and Manufacturing (IJIDeM) 17 (6) 2891 (2023)
https://doi.org/10.1007/s12008-022-01016-7

Machining of hard and brittle materials: A comprehensive review

Ankit Sharma, Mohit Kalsia, Amrinder Singh Uppal, Atul Babbar and Vikas Dhawan
Materials Today: Proceedings 50 1048 (2022)
https://doi.org/10.1016/j.matpr.2021.07.452

Multi-objective optimization of magnetic abrasive finishing using grey relational analysis

Atul Babbar, Ankit Sharma and Parminderjeet Singh
Materials Today: Proceedings 50 570 (2022)
https://doi.org/10.1016/j.matpr.2021.01.004

Numerical Modelling and Optimization in Advanced Manufacturing Processes

Atul Babbar, Vivek Jain, Dheeraj Gupta, Chander Prakash and Deepak Agrawal
Materials Forming, Machining and Tribology, Numerical Modelling and Optimization in Advanced Manufacturing Processes 145 (2022)
https://doi.org/10.1007/978-3-031-04301-7_9

Influence of Toothbrush Abrasion and Surface Treatments on Roughness and Gloss of Polymer-Infiltrated Ceramics

Nawaf Labban, Mohammad D. Al Amri, Sarah M. Alnafaiy, Saleh M. Alhijji, Mohammad A. Alenizy, Mounir Iskandar and Sabrina Feitosa
Polymers 13 (21) 3694 (2021)
https://doi.org/10.3390/polym13213694

Advances in Production and Industrial Engineering

Ankit Sharma, Atul Babbar, Vivek Jain and Dheeraj Gupta
Lecture Notes in Mechanical Engineering, Advances in Production and Industrial Engineering 369 (2021)
https://doi.org/10.1007/978-981-15-5519-0_28

In vivo evaluation of machining forces, torque, and bone quality during skull bone grinding

Atul Babbar, Vivek Jain and Dheeraj Gupta
Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine 234 (6) 626 (2020)
https://doi.org/10.1177/0954411920911499

A novel investigation study on float glass hole surface integrity & tool wear using Chemical assisted Rotary ultrasonic machining

Ankit Sharma, Vivek Jain and Dheeraj Gupta
Materials Today: Proceedings 26 632 (2020)
https://doi.org/10.1016/j.matpr.2019.12.202

Study on ultrasonic-assisted drilling of Ti6Al4V using 3-flute drill in the finite element simulation

Peng Wang and Dazhong Wang
Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 234 (7) 1298 (2020)
https://doi.org/10.1177/0954406219893001

3D Printing in Biomedical Engineering

Atul Babbar, Vivek Jain, Dheeraj Gupta, et al.
Materials Horizons: From Nature to Nanomaterials, 3D Printing in Biomedical Engineering 167 (2020)
https://doi.org/10.1007/978-981-15-5424-7_8

Rotary ultrasonic milling of C/SiC composites fabricated using chemical vapor infiltration and needling technique

Atul Babbar, Akash Sharma, Vivek Jain and Anil Kumar Jain
Materials Research Express 6 (8) 085607 (2019)
https://doi.org/10.1088/2053-1591/ab1bf7

Effect of post weld thermal aging (PWTA) sensitization on micro-hardness and corrosion behavior of AISI 304 weld joints

M Kumar, A Babbar, A Sharma and A S Shahi
Journal of Physics: Conference Series 1240 (1) 012078 (2019)
https://doi.org/10.1088/1742-6596/1240/1/012078

Enhancement of activated tungsten inert gas (A-TIG) welding using multi-component TiO2-SiO2-Al2O3 hybrid flux

Atul Babbar, Akhilesh Kumar, Vivek Jain and Dheeraj Gupta
Measurement 148 106912 (2019)
https://doi.org/10.1016/j.measurement.2019.106912

Thermogenesis mitigation using ultrasonic actuation during bone grinding: a hybrid approach using CEM43°C and Arrhenius model

Atul Babbar, Vivek Jain and Dheeraj Gupta
Journal of the Brazilian Society of Mechanical Sciences and Engineering 41 (10) (2019)
https://doi.org/10.1007/s40430-019-1913-6