Possibilities and limitations of titanium alloy additive manufacturing
MATEC Web Conf., 224 (2018) 01064
Published online: 2018-10-30
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Prediction of columnar and equiaxed grain morphologies during wire arc additive manufacturing of a Ti-Al-Fe-V alloy
Z. Li, M. Greenwood, J. Miranda, Noel Haynes and A. B. PhillionProgress in Additive Manufacturing 10 (10) 8007 (2025)
https://doi.org/10.1007/s40964-025-01089-2
41 (2025)
https://doi.org/10.1007/978-3-031-78295-4_5
A Review of Optimization of Additively Manufactured 316/316L Stainless Steel Process Parameters, Post-Processing Strategies, and Defect Mitigation
Usman Aziz, Marion McAfee, Ioannis Manolakis, Nick Timmons and David TormeyMaterials 18 (12) 2870 (2025)
https://doi.org/10.3390/ma18122870
99 (2025)
https://doi.org/10.1002/9781394287659.ch6
A Novel Hybrid Technique for Enhancing Mechanical Properties in Additively Manufactured Steels
Mustafa Safa Yılmaz, Mevlüt Yunus Kayacan and Mamoun AlshihabiInternational Journal of Precision Engineering and Manufacturing (2025)
https://doi.org/10.1007/s12541-025-01294-7
172 (2024)
https://doi.org/10.2174/9789815179330124010014
A Study on Microstructural Evolution and Corrosion Behavior of Ti36-Al16-V16-Fe16-Cr16 High-Entropy Alloy Fabricated via Spark Plasma Sintering Technology
Uwa O. Uyor, Abimbola P. I. Popoola and Olawale M. PopoolaTransactions of the Indian Institute of Metals 77 (11) 3915 (2024)
https://doi.org/10.1007/s12666-024-03446-1
Unveiling the tribological and corrosion characteristics of Ti20-Al16-V16-Fe16-Ni16-Cr16 high-entropy alloy developed via spark plasma sintering
Uwa O. Uyor, Abimbola P. I. Popoola, Olawale M. Popoola and Chika O. UjahTribology - Materials, Surfaces & Interfaces 18 (3) 183 (2024)
https://doi.org/10.1177/17515831241274448
High‐throughput preparation for alloy composition design in additive manufacturing: A comprehensive review
Min Liu, Chenxu Lei, Yongxiang Wang, Baicheng Zhang and Xuanhui QuMaterials Genome Engineering Advances 2 (3) (2024)
https://doi.org/10.1002/mgea.55
763 (2024)
https://doi.org/10.1007/978-3-031-38241-3_85
Electrochemical and Tribological Performance of Ti–Al with xNb Addition Synthesized via Laser In situ Alloying
L. R. Kanyane, S. A. Raji and M. TlotlengJournal of Bio- and Tribo-Corrosion 10 (1) (2024)
https://doi.org/10.1007/s40735-023-00812-2
A review study on thermal stability of powder-based additively manufactured alloys
H. Daiy, Y. Najafi, Z. Delbari Ragheb and H.R. AbediJournal of Alloys and Compounds 965 171384 (2023)
https://doi.org/10.1016/j.jallcom.2023.171384
Mechanical and Oxidation Characteristics of Ti20-Al16-V16-Fe16- Ni16-Cr16 High-Entropy Alloy Developed via Spark Plasma Sintering for High-Temperature/Strength Applications
C. O. Ujah, A. P. I. Popoola, O. M. Popoola, A. E. Afolabi and U. O. UyorJournal of Materials Engineering and Performance 32 (1) 18 (2023)
https://doi.org/10.1007/s11665-022-07066-y
A theoretical analysis of the vibrational modes of ammonium metavanadate
Qing Guo, Xiao-Yan Liu, Si-Cheng Liu, et al.RSC Advances 13 (23) 15975 (2023)
https://doi.org/10.1039/D3RA02053C
A Calibration Approach for Accelerated Creep Testing for Electron Beam Melted Ti-6Al-4V Using the Wilshire–Cano–Stewart Model
Md Abir Hossain, Jacob T. Pellicotte and Calvin M. StewartJournal of Engineering for Gas Turbines and Power 145 (11) (2023)
https://doi.org/10.1115/1.4063310
Selective Laser Melting of Ti-6Al-4V Alloy: Correlation Between Processing Parameters, Microstructure and Corrosion Properties
Marcio Sangali, Alessandra Cremasco, Juliano Soyama, Rubens Caram and Rodrigo J. ContieriMaterials Research 26 (suppl 1) (2023)
https://doi.org/10.1590/1980-5373-mr-2023-0055
A Brief Review on Additive Manufacturing Processes for Lightweight Metal Matrix Composites : Recent advances in selection, reinforcement, preparation and processing and their influence on material properties
Abd Baghad and Khalil El MabroukJohnson Matthey Technology Review 67 (2) 197 (2023)
https://doi.org/10.1595/205651323X16601431334489
Latest Developments and Insights of Orthopedic Implants in Biomaterials Using Additive Manufacturing Technologies
Asarudheen Abdudeen, Jaber E. Abu Qudeiri, Ansar Kareem and Anasmon Koderi ValappilJournal of Manufacturing and Materials Processing 6 (6) 162 (2022)
https://doi.org/10.3390/jmmp6060162
The State of the Art for Wire Arc Additive Manufacturing Process of Titanium Alloys for Aerospace Applications
Dipayan Chakraborty, Tumula Tirumala, Srihari Chitral, et al.Journal of Materials Engineering and Performance 31 (8) 6149 (2022)
https://doi.org/10.1007/s11665-022-07128-1
Investigating the nanomechanical and thermal characteristics of Ti20-Al20-V20-Fe20-Ni20 HEA developed via SPS for high energy applications
Chika O. Ujah, Patricia A. Popoola, Olawale M. Popoola, Ebenezer A. Afolabi and Uwa O. OrjiMetallurgical Research & Technology 119 (6) 616 (2022)
https://doi.org/10.1051/metal/2022102
Investigating the Tribology, Vickers Hardness and Microstructure of Ti20–Al20–V20–Fe20–Ni20 HEA Developed with SPS
C. O. Ujah, A. P. I. Popoola, O. M. Popoola and U. O. UyorTransactions of the Indian Institute of Metals 75 (12) 3029 (2022)
https://doi.org/10.1007/s12666-022-02682-7
Powder bed fusion–laser melting (PBF–LM) process: latest review of materials, process parameter optimization, application, and up-to-date innovative technologies
Md. Hazrat Ali, Nurbol Sabyrov and Essam ShehabProgress in Additive Manufacturing 7 (6) 1395 (2022)
https://doi.org/10.1007/s40964-022-00311-9
Adaptive Mechanism for Designing a Personalized Cranial Implant and Its 3D Printing Using PEEK
Syed Hammad Mian, Khaja Moiduddin, Sherif Mohammed Elseufy and Hisham AlkhalefahPolymers 14 (6) 1266 (2022)
https://doi.org/10.3390/polym14061266
Analysis of the Microstructure and Tribology of Ti36-Al16-V16-Fe16-Cr16 HEA Developed with SPS for Engineering Applications
C. O. Ujah, A. P. I. Popoola, O. M. Popoola and U. O. UyorJOM 74 (11) 4239 (2022)
https://doi.org/10.1007/s11837-022-05509-4
Microstructural evolution and nano-mechanical properties of Ti-Al-based alloys synthesized by laser in-situ alloying
L.R. Kanyane, A.P.I. Popoola, S. Pityana, M. Tlotleng and W. du PreezMATEC Web of Conferences 370 03001 (2022)
https://doi.org/10.1051/matecconf/202237003001
Mechanical and thermal behaviors of Ti36-Al16-V16-Fe16-Cr16 high entropy alloys fabricated by spark plasma sintering: An advanced material for high temperature/strength applications
Chika O Ujah, Patricia A Popoola, Olawale Popoola and Uwa O UyorJournal of Composite Materials 56 (26) 3913 (2022)
https://doi.org/10.1177/00219983221111498
3D Printing Technology and Materials for Automotive Application: A Mini-Review
Brian Jumaquio Tuazon, Nick Anthony V. Custodio, Rex B. Basuel, Lanz Andre Delos Reyes and John Ryan C. DizonKey Engineering Materials 913 3 (2022)
https://doi.org/10.4028/p-26o076
Direct Ink Writing of Porous Ti6Al4V Alloys via UV Light Curing
Zebei Li, Fang Yang, Haojie Wang, Yanli Li, Cunguang Chen and Zhimeng GuoAdvanced Engineering Materials 24 (10) (2022)
https://doi.org/10.1002/adem.202200176
Post-processing of additively manufactured metallic alloys – A review
Amir Malakizadi, Dinesh Mallipeddi, Sasan Dadbakhsh, Rachid M'Saoubi and Peter KrajnikInternational Journal of Machine Tools and Manufacture 179 103908 (2022)
https://doi.org/10.1016/j.ijmachtools.2022.103908
The Trajectory of Additively Manufactured Titanium Alloys with Superior Mechanical Properties and Engineered Microstructures
Saeid Alipour, Atieh Moridi, Frank Liou and Arezoo EmdadiAdditive Manufacturing 60 103245 (2022)
https://doi.org/10.1016/j.addma.2022.103245
Performance Improvement of Piston Engine in Aeronautics by Means of Additive Manufacturing Technologies
Guido Saccone, Giovanni Andreutti, Davide Lucariello, et al.Journal of Aerospace Engineering 34 (5) (2021)
https://doi.org/10.1061/(ASCE)AS.1943-5525.0001305
Selective laser manufacturing of Ti-based alloys and composites: impact of process parameters, application trends, and future prospects
N. Singh, P. Hameed, R. Ummethala, G. Manivasagam, K.G. Prashanth and J. EckertMaterials Today Advances 8 100097 (2020)
https://doi.org/10.1016/j.mtadv.2020.100097
Differences in the Response of Additively Manufactured Titanium Alloy to Heat Treatment - Comparison between SLM and EBM
Michaela Roudnicka, Michal Misurak and Dalibor VojtechManufacturing Technology 19 (4) 668 (2019)
https://doi.org/10.21062/ujep/353.2019/a/1213-2489/MT/19/4/668
Near Net Shape Manufacture of Titanium Alloy Components from Powder and Wire: A Review of State-of-the-Art Process Routes
Thomas Childerhouse and Martin JacksonMetals 9 (6) 689 (2019)
https://doi.org/10.3390/met9060689