Investigation on hole quality of cutting conditions in drilling of CFRP composite
MATEC Web Conf., 112 (2017) 01013
Published online: 2017-07-03
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
A Statistical Study on the Influence of Drilling Process in Delamination Observed in Composite Plates
Hugo R. C. Cerqueira, João E. Matos, José L. Esteves, Susana C. F. Fernandes and Luis M. P. DurãoMaterials 18 (7) 1595 (2025)
https://doi.org/10.3390/ma18071595
Enhancement of the hole quality of freeform CFRP with industrial robot posture optimization
Yun Seok Kang, Haegu Lee, Dong Chan Kim, Jaewoo Seo and Hyung Wook ParkThe International Journal of Advanced Manufacturing Technology 137 (7-8) 3489 (2025)
https://doi.org/10.1007/s00170-025-15333-0
300 (2025)
https://doi.org/10.1007/978-3-031-82746-4_27
Understanding the tool wear mechanism during robotic milling of glass fibre reinforced plastic
Mingjian Sun, Kai Guo, Vinothkumar Sivalingam, Jie Sun, Duo Li and Tao HuangTribology International 195 109648 (2024)
https://doi.org/10.1016/j.triboint.2024.109648
Review of Image Processing Methods for Surface and Tool Condition Assessments in Machining
Ali Ercetin, Oguzhan Der, Fatih Akkoyun, Manjunath Gowdru Chandrashekarappa, Ramazan Şener, Mücahit Çalışan, Nevzat Olgun, Ganesh Chate and Kurki BharathJournal of Manufacturing and Materials Processing 8 (6) 244 (2024)
https://doi.org/10.3390/jmmp8060244
Holistic review of drilling on CFRP composites: Techniques, FEM, sustainability, challenges, and advances
Muhammad Hamed, Chen Zhang, Aqib Mashood Khan, Muhammad Saleem and M. D. MusanurThe International Journal of Advanced Manufacturing Technology 135 (5-6) 2661 (2024)
https://doi.org/10.1007/s00170-024-14317-w
Damage Propagation by Cyclic Loading in Drilled Carbon/Epoxy Plates
Luis M. P. Durão, João E. Matos, Nuno C. Loureiro, José L. Esteves and Susana C. F. FernandesMaterials 16 (7) 2688 (2023)
https://doi.org/10.3390/ma16072688
Thermal–mechanical coupling numerical simulation and low damage analysis for drilling composite
Laibin Zhang, Guowen Wang, Xiaoyao Xu, Shanyong Xuan, Xin Fan, Yan Kan and Xuefeng YaoComposite Structures 324 117542 (2023)
https://doi.org/10.1016/j.compstruct.2023.117542
Application of Image Processing in Different Machining Processes: A Short and Technical Review
Gonca Uslu, Mehmet Tayyip Özdemir, Recep Demirsöz, Mustafa Günay and Mehmet Erdi KorkmazPrabha Materials Science Letters 2 (2) 62 (2023)
https://doi.org/10.33889/PMSL.2023.2.2.006
Optimization of CFRP drilling process: a review
Weiyu Zhu, Hongge Fu, Fei Li, et al.The International Journal of Advanced Manufacturing Technology 123 (5-6) 1403 (2022)
https://doi.org/10.1007/s00170-022-10112-7
PEEK-CF30 Termoplastik Malzemenin Delinmesinde Delme Parametrelerinin Etkileri: İtme Kuvveti, Yüzey Pürüzlülüğü ve Delaminasyon
Mehmet BOYYüzüncü Yıl Üniversitesi Fen Bilimleri Enstitüsü Dergisi 27 (3) 570 (2022)
https://doi.org/10.53433/yyufbed.1104700
A review of recent advancements in drilling of fiber-reinforced polymer composites
Rampal, Gaurav Kumar, Sanjay Mavinkere Rangappa, Suchart Siengchin and Sunny ZafarComposites Part C: Open Access 9 100312 (2022)
https://doi.org/10.1016/j.jcomc.2022.100312
Performance evaluation of coated ceramic tools in nano-MQL assisted turning of powder metallurgical manufactured Böhler K490 steel
MEHMET BOYSādhanā 47 (3) (2022)
https://doi.org/10.1007/s12046-022-01959-3
Effect of Drilling Parameters on Machining Performance in Drilling Polytetrafluoroethylene
Jing Ni, Xiaotian Zeng, M. S. H. Al-Furjan, Huijun Zhao, Liming Guan, Zhi Cui and Lidong HanMaterials 15 (19) 6922 (2022)
https://doi.org/10.3390/ma15196922
Processing and Characterization of Materials
Anshuman Das, G. Surya Rao, K. Debnath and R. N. MahapatraSpringer Proceedings in Materials, Processing and Characterization of Materials 13 223 (2021)
https://doi.org/10.1007/978-981-16-3937-1_23
Investigation of microstructure, mechanical and machinability properties of Mo-added steel produced by powder metallurgy method
Mehmet Akif Erden, Nafiz Yaşar, Mehmet Erdi Korkmaz, et al.The International Journal of Advanced Manufacturing Technology 114 (9-10) 2811 (2021)
https://doi.org/10.1007/s00170-021-07052-z
A novel method for improving drilling performance of CFRP/Ti6AL4V stacked materials
Nafiz Yaşar, Mehmet Erdi Korkmaz, Munish Kumar Gupta, Mehmet Boy and Mustafa GünayThe International Journal of Advanced Manufacturing Technology 117 (1-2) 653 (2021)
https://doi.org/10.1007/s00170-021-07758-0
Machining process of glass-fiber-reinforced polyamide 6.6 Composite: pathways to improve the drilling of recycled polymers
Harrison Lourenço Corrêa, Rafaela Voichki Rodrigues and Dalberto Dias da CostaEngineering Research Express 2 (1) 015037 (2020)
https://doi.org/10.1088/2631-8695/ab7684
CFRP/Al İstifli Delmede Matkap Uç Açısının İtme Kuvveti (Fz) ve Takım Aşınması Üzerine Etkilerinin Araştırılması
Erman AYDINIğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi 9 (3) 1574 (2019)
https://doi.org/10.21597/jist.521218
Experimental investigation on novel drilling strategy of CFRP laminates using variable feed rate
Nafiz Yaşar and Mustafa GünayJournal of the Brazilian Society of Mechanical Sciences and Engineering 41 (3) (2019)
https://doi.org/10.1007/s40430-019-1658-2
CFRP/Al-7075 istifli delmede matkap uç açılarının delinebilirlik üzerine etkisi
Erman AYDIN and Muammer NALBANTGazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi 35 (2) 917 (2019)
https://doi.org/10.17341/gazimmfd.548419
Al2014 Alüminyum Alaşımının Delinmesinde İtme Kuvvetinin Sonlu Elemanlar Yöntemi İle Analizi
Mehmet Erdi Korkmaz, Ramazan Çakıroğlu, Nafiz Yaşar, Ramazan Özmen and Mustafa GünayEl-Cezeri Fen ve Mühendislik Dergisi (2019)
https://doi.org/10.31202/ecjse.449701