Performance of palm oil as a biobased machining lubricant when drilling inconel 718
MATEC Web Conf., 101 (2017) 03015
Published online: 2017-03-09
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Biodegradable cutting fluids for sustainable manufacturing: a review of machining mechanisms and performance
Chin Ket Gan, Pay Jun Liew, Kin Yuen Leong and Jiwang YanThe International Journal of Advanced Manufacturing Technology 131 (3-4) 955 (2024)
https://doi.org/10.1007/s00170-024-13132-7
The Use of Graphite Micropowder in the Finish Turning of the Ti-6Al-4V Titanium Alloy Under Minimum Quantity Lubrication Conditions
Joanna Lisowicz, Witold Habrat, Krzysztof Krupa, Grażyna Mrówka-Nowotnik, Paweł Szroeder, Magdalena Zawada-Michałowska and Jarosław KorpysaMaterials 17 (24) 6121 (2024)
https://doi.org/10.3390/ma17246121
Green manufacturing – Optimization of novel biodegradable cutting fluid for machining
Rahul Katna, M. Suhaib, Narayan Agrawal, Veerpal Bhati, Praveen Kumar and Mumtaz Ahmad KhanMaterials Today: Proceedings (2023)
https://doi.org/10.1016/j.matpr.2023.03.019
A Review on Machining of Nickel-Based Superalloys Using Nanofluids Under Minimum Quantity Lubrication (NFMQL)
Paresh Kulkarni and Satish ChinchanikarJournal of The Institution of Engineers (India): Series C 104 (1) 183 (2023)
https://doi.org/10.1007/s40032-022-00905-w
Soft computing for sustainable drilling of AISI 316L stainless steel under formulated neem oil minimum quantity lubrication condition
C.P. Natesh, Y.M. Shashidhara, H.J. Amarendra, Raviraj Shetty, Rajesh Nayak, S. V. UdayKumar Shetty, Madhukara Nayak and Adithya HegdeCogent Engineering 10 (2) (2023)
https://doi.org/10.1080/23311916.2023.2261231
Implementation of green cooling/lubrication strategies in metal cutting industries: A state of the art towards sustainable future and challenges
Mehmet Erdi Korkmaz, M.K. Gupta, Nimel Sworna Ross and Vinothkumar SivalingamSustainable Materials and Technologies 36 e00641 (2023)
https://doi.org/10.1016/j.susmat.2023.e00641
A review on influence of nanoparticle parameters on viscosity of nanofluids and machining performance in minimum quantity lubrication
Hiru P Hirudayanathan, Sujan Debnath, Mahmood Anwar, Mahzan B Johar, Naveen K Elumalai and U Mohammed IqbalProceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering (2023)
https://doi.org/10.1177/09544089231189668
Recent Trends in Manufacturing and Materials Towards Industry 4.0
Siti Nur Qamarina Ahmad Jumali, Zaidi Embong, Erween Abd Rahim, Zazuli Mohid and Syahrullail SamionLecture Notes in Mechanical Engineering, Recent Trends in Manufacturing and Materials Towards Industry 4.0 257 (2021)
https://doi.org/10.1007/978-981-15-9505-9_25
State-of-the-Art and Future Perspectives of Environmentally Friendly Machining Using Biodegradable Cutting Fluids
M. Naveed, A. Arslan, H. M. A. Javed, T. Manzoor, M. M. Quazi, T. Imran, Z. M. Zulfattah, M. Khurram and I. M. R. FattahEnergies 14 (16) 4816 (2021)
https://doi.org/10.3390/en14164816
Machinability of Inconel 718: A critical review on the impact of cutting temperatures
Kore Mahesh, Jibin T Philip, S N Joshi and Basil KuriachenMaterials and Manufacturing Processes 36 (7) 753 (2021)
https://doi.org/10.1080/10426914.2020.1843671
The effect of different MQL supply strategies into the cutting zone on the tool wear when turning of Ti-6Al-4V alloy
Joanna Lisowicz, Witold Habrat, Krzysztof Krupa and Piotr JanochaIOP Conference Series: Materials Science and Engineering 1037 (1) 012004 (2021)
https://doi.org/10.1088/1757-899X/1037/1/012004
Advances in Lightweight Materials and Structures
Prajith Sivadasan, Gotimayum Sachidev Sharma, Ivan Sunit Rout and P. Pal PandianSpringer Proceedings in Materials, Advances in Lightweight Materials and Structures 8 497 (2020)
https://doi.org/10.1007/978-981-15-7827-4_50
Potential of using polyethylene as viscosity enhancer of palm oil to use as a lubricating oil
TKKS Pathmasiri and GIP PereraAdvances in Mechanical Engineering 12 (11) (2020)
https://doi.org/10.1177/1687814020970745
Performance of Low Cost 3D Printed Minimum Quantity Lubrication Applicator Using Palm Oil in Milling Steel
Abang Mohammad Nizam Abang Kamaruddin, Abdullah Yassin, Shahrol Mohamaddan, Syaiful Anwar Rajaie, Muhammad Isyraf Mazlan, Steven Joel Total and Ridhwan Shah BusrahMaterials Science Forum 997 85 (2020)
https://doi.org/10.4028/www.scientific.net/MSF.997.85