Vision based error detection for 3D printing processes
MATEC Web of Conferences, 59 (2016) 06003
Published online: 2016-05-24
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
16215 392 (2026)
https://doi.org/10.1007/978-981-95-3808-9_32
(2025)
https://doi.org/10.2139/ssrn.5146382
1 (2025)
https://doi.org/10.1109/ICMCTC62214.2025.11196144
Defect detection in 3D printing: a review of image processing and machine vision techniques
Elham Armin, Saleh Ebrahimian, Mehdi Sanjari, Peyman Saidi and Hamid-Reza PourrezaThe International Journal of Advanced Manufacturing Technology 140 (3-4) 2103 (2025)
https://doi.org/10.1007/s00170-025-16382-1
In-Situ Monitoring and Process Control in Material Extrusion Additive Manufacturing: A Comprehensive Review
Alexander Isiani, Kelly Crittenden, Leland Weiss, Okeke Odirachukwu, Ramanshu Jha, Okoye Johnson and Osinachi AbikaJournal of Experimental and Theoretical Analyses 3 (3) 21 (2025)
https://doi.org/10.3390/jeta3030021
Fault analysis in additive manufacturing: Identifying causes of three-dimensional printer faults using machine learning and large language models
Muhammed Abdulhamid KarabiyikJournal of Systems and Software 230 112556 (2025)
https://doi.org/10.1016/j.jss.2025.112556
Understanding and Resolving 3D Printing Challenges: A Systematic Literature Review
Seulhee Kwon and Dongwook HwangProcesses 13 (6) 1772 (2025)
https://doi.org/10.3390/pr13061772
Multi-view deep information fusion framework for online quality monitoring and autonomous correction in material extrusion additive manufacturing
Bowen Yu, Huaqing Zhang, Jiafeng Tang, Zhibin Zhao, Xingwu Zhng, Weifeng He and Xuefeng ChenVirtual and Physical Prototyping 20 (1) (2025)
https://doi.org/10.1080/17452759.2025.2500672
Critical success factors for implementing 3D printing technology in construction projects: academics and construction practitioners’ perspectives
Ruifan Chang and Maxwell Fordjour Antwi-AfariConstruction Innovation 25 (3) 843 (2025)
https://doi.org/10.1108/CI-04-2023-0060
The Experimental Comparison of Abrasion Resistance of Extruded and 3D Printed Plastics
Maciej Kujawa and Anita PtakMaterials 18 (7) 1592 (2025)
https://doi.org/10.3390/ma18071592
Real-Time Stringing Detection for Additive Manufacturing
Oumaima Charia, Hayat Rajani, Inés Ferrer Real, Miquel Domingo-Espin and Nuno GraciasJournal of Manufacturing and Materials Processing 9 (3) 74 (2025)
https://doi.org/10.3390/jmmp9030074
In Situ Active Contour-Based Segmentation and Dimensional Analysis of Part Features in Additive Manufacturing
Tushar Saini and Panos S. ShiakolasJournal of Manufacturing and Materials Processing 9 (3) 102 (2025)
https://doi.org/10.3390/jmmp9030102
A deep learning solution for real-time quality assessment and control in additive manufacturing using point cloud data
Javid Akhavan, Jiaqi Lyu and Souran ManoochehriJournal of Intelligent Manufacturing 35 (3) 1389 (2024)
https://doi.org/10.1007/s10845-023-02121-4
Generalizable process monitoring for FFF 3D printing with machine vision
Kim Torben Werkle, Caroline Trage, Jan Wolf and Hans-Christian MöhringProduction Engineering 18 (3-4) 593 (2024)
https://doi.org/10.1007/s11740-023-01234-2
Thermal imaging-based diagnostic process using explainable artificial intelligence for 3D printing system
Young-Jun YooSoft Computing 28 (9-10) 6741 (2024)
https://doi.org/10.1007/s00500-023-09530-w
Process Monitoring, Diagnosis and Control of Additive Manufacturing
Qihang Fang, Gang Xiong, MengChu Zhou, Tariku Sinshaw Tamir, Chao-Bo Yan, Huaiyu Wu, Zhen Shen and Fei-Yue WangIEEE Transactions on Automation Science and Engineering 21 (1) 1041 (2024)
https://doi.org/10.1109/TASE.2022.3215258
Optimal configurations of Minimally Intelligent additive manufacturing machines for Makerspace production environments
James Gopsill, Mark Goudswaard, Chris Snider, Lorenzo Giunta and Ben HicksArtificial Intelligence for Engineering Design, Analysis and Manufacturing 38 (2024)
https://doi.org/10.1017/S0890060423000239
1 (2024)
https://doi.org/10.1109/ICCE59016.2024.10444198
(2024)
https://doi.org/10.2139/ssrn.4855921
1 (2024)
https://doi.org/10.1109/I2CT61223.2024.10543771
1 (2024)
https://doi.org/10.1109/ICCAD60883.2024.10553900
Precision improvement of robotic bioprinting via vision-based tool path compensation
Erfan Shojaei Barjuei, Joonhwan Shin, Keekyoung Kim and Jihyun LeeScientific Reports 14 (1) (2024)
https://doi.org/10.1038/s41598-024-68597-z
Real-time defect detection for FFF 3D printing using lightweight model deployment
WenJing Hu, Chang Chen, Shaohui Su, Jian Zhang and An ZhuThe International Journal of Advanced Manufacturing Technology 134 (9-10) 4871 (2024)
https://doi.org/10.1007/s00170-024-14452-4
(2024)
https://doi.org/10.21203/rs.3.rs-4380689/v1
Editors’ Choice—Review—Sensor-Based and Computational Methods for Error Detection and Correction in 3D Printing
Prateek Mehta, Mubarak A. Mujawar, Samantha Lafrance, Shonda Bernadin, Daniel Ewing and Shekhar BhansaliECS Sensors Plus 3 (3) 030602 (2024)
https://doi.org/10.1149/2754-2726/ad7a88
Infrared thermography–based framework for in situ classification of underextrusions in material extrusion
Asef Ishraq Sadaf, Hossain Ahmed and Mujibur Rahman KhanThe International Journal of Advanced Manufacturing Technology 134 (11-12) 5631 (2024)
https://doi.org/10.1007/s00170-024-14512-9
Defect Detection and Closed-loop Feedback Using Machine Learning for Fused Filament Fabrication
Amaris De La Rosa, Amir Armani and Marcia GolmohamadiProcedia CIRP 126 603 (2024)
https://doi.org/10.1016/j.procir.2024.08.247
A comprehensive review on integrating vision-based sensing in extrusion-based 3D printing processes: toward geometric monitoring of extrusion-based 3D concrete printing
Paniz Farrokhsiar, Benay Gursoy and Jose Pinto DuarteConstruction Robotics 8 (2) (2024)
https://doi.org/10.1007/s41693-024-00133-x
Evaluation of Image Segmentation Methods for In Situ Quality Assessment in Additive Manufacturing
Tushar Saini, Panos S. Shiakolas and Christopher McMurroughMetrology 4 (4) 598 (2024)
https://doi.org/10.3390/metrology4040037
1 (2023)
https://doi.org/10.1109/CASE56687.2023.10260603
Design of Experiments to Compare the Mechanical Properties of Polylactic Acid Using Material Extrusion Three-Dimensional-Printing Thermal Parameters Based on a Cyber–Physical Production System
Miguel Castillo, Roberto Monroy and Rafiq AhmadSensors 23 (24) 9833 (2023)
https://doi.org/10.3390/s23249833
Toward Accurate Fused Deposition Modeling 3D Printer Fault Detection Using Improved YOLOv8 With Hyperparameter Optimization
Nyoman Bogi Aditya Karna, Made Adi Paramartha Putra, Syifa Maliah Rachmawati, Mideth Abisado and Gabriel Avelino SampedroIEEE Access 11 74251 (2023)
https://doi.org/10.1109/ACCESS.2023.3293056
Optical Methods of Error Detection in Additive Manufacturing: A Literature Review
Brianna Wylie and Carl MooreJournal of Manufacturing and Materials Processing 7 (3) 80 (2023)
https://doi.org/10.3390/jmmp7030080
HFTL: Hierarchical Federated Transfer Learning for Secure and Efficient Fault Classification in Additive Manufacturing
Made Adi Paramartha Putra, Syifa Maliah Rachmawati, Mideth Abisado and Gabriel Avelino SampedroIEEE Access 11 54795 (2023)
https://doi.org/10.1109/ACCESS.2023.3280471
1 (2023)
https://doi.org/10.1109/ISPA58351.2023.10278959
(2023)
https://doi.org/10.2139/ssrn.4501033
1160 (2023)
https://doi.org/10.1109/EuroSP57164.2023.00071
109 (2023)
https://doi.org/10.1109/ICON-SONICS59898.2023.10435335
Prediction of compressive strength in additively fabricated part using long short term memory based neural network
Pradeep Castro, Gurusamy Pathinettampadian, Charan Selva Dhanush Ravi and Mohan Kumar SubramaniyanMaterials Today Communications 37 107139 (2023)
https://doi.org/10.1016/j.mtcomm.2023.107139
Fused filament fabrication: A state-of-the-art review of the technology, materials, properties and defects
Aniket Yadav, Piyush Rohru, Atul Babbar, Ranvijay Kumar, Nishant Ranjan, Jasgurpreet Singh Chohan, Raman Kumar and Manish GuptaInternational Journal on Interactive Design and Manufacturing (IJIDeM) 17 (6) 2867 (2023)
https://doi.org/10.1007/s12008-022-01026-5
(2023)
https://doi.org/10.21203/rs.3.rs-2129511/v5
460 356 (2023)
https://doi.org/10.1007/978-3-031-20875-1_33
A Review on Application of Acoustic Emission Testing During Additive Manufacturing
Prabhat Ranjan Prem, Ambily Parukutty Sanker, Shilpa Sebastian and Senthil Kumar KaliyavaradhanJournal of Nondestructive Evaluation 42 (4) (2023)
https://doi.org/10.1007/s10921-023-01005-0
Deep adversarial learning system for fault diagnosis in fused deposition modeling with imbalanced data
Longyan Tan, Tingting Huang, Jie Liu, Qian Li and Xin WuComputers & Industrial Engineering 176 108887 (2023)
https://doi.org/10.1016/j.cie.2022.108887
Machine Learning Based Fault Anticipation for 3D Printing*
Voydie Dorian, Goupil Louis, Chanthery Elodie, Travé-Massuyès Louise and Delautier SébastienIFAC-PapersOnLine 56 (2) 2927 (2023)
https://doi.org/10.1016/j.ifacol.2023.10.1414
Machine learning and sensor-based approach for defect detection in MEX additive manufacturing process- A Review
Avinash Selot and R. K. DwivediJournal of the Brazilian Society of Mechanical Sciences and Engineering 45 (10) (2023)
https://doi.org/10.1007/s40430-023-04425-1
(2022)
https://doi.org/10.21203/rs.3.rs-2129511/v3
Detect-Remove-Replace: A Robotic Solution That Enables Unmanned Continuous 3D Printing
Hsieh-Yu Li, Yuchen Ma, M. Naufal A. Bin Miswadi, Long Nguyen Nguyen Luu, Liangjing Yang, Shaohui Foong, Gim Song Soh, Espen Sivertsen and U-Xuan TanIEEE Robotics & Automation Magazine 29 (2) 33 (2022)
https://doi.org/10.1109/MRA.2021.3103478
1 (2022)
https://doi.org/10.1109/IEMTRONICS55184.2022.9795815
Design and Analysis of Hybrid Fused Filament Fabrication Apparatus for Fabrication of Composites
Aniket Yadav, Piyush Chohan, Ranvijay Kumar, Jasgurpreet Singh Chohan and Raman KumarCurrent Materials Science 15 (1) 79 (2022)
https://doi.org/10.2174/2666145414666210412150641
Development of automated feature extraction and convolutional neural network optimization for real-time warping monitoring in 3D printing
Jiarui Xie, Aditya Saluja, Amirmohammad Rahimizadeh and Kazem FayazbakhshInternational Journal of Computer Integrated Manufacturing 35 (8) 813 (2022)
https://doi.org/10.1080/0951192X.2022.2025621
Generalisable 3D printing error detection and correction via multi-head neural networks
Douglas A. J. Brion and Sebastian W. PattinsonNature Communications 13 (1) (2022)
https://doi.org/10.1038/s41467-022-31985-y
(2022)
https://doi.org/10.21203/rs.3.rs-2129511/v4
1 (2022)
https://doi.org/10.1109/ROMA55875.2022.9915693
1 (2022)
https://doi.org/10.1109/SIST54437.2022.9945778
Systematic deep transfer learning method based on a small image dataset for spaghetti-shape defect monitoring of fused deposition modeling
Hyungjung Kim, Hyunsu Lee and Sung-Hoon AhnJournal of Manufacturing Systems 65 439 (2022)
https://doi.org/10.1016/j.jmsy.2022.10.009
A review on non-destructive evaluation and characterization of additively manufactured components
P. R. Sreeraj, Santosh Kr. Mishra and Purushottam Kumar SinghProgress in Additive Manufacturing 7 (2) 225 (2022)
https://doi.org/10.1007/s40964-021-00227-w
Shape deviations of DLW microstructures in dependency of fabrication parameters
Sven Fritzsche, Ievgenia Topolniak, Matthias Weise and Heinz SturmJournal of Micromechanics and Microengineering 31 (12) 125002 (2021)
https://doi.org/10.1088/1361-6439/ac2a14
Proceedings of IncoME-V & CEPE Net-2020
Chun Li, Lianghua Zeng, Yubin Lin and Fengshou GuMechanisms and Machine Science, Proceedings of IncoME-V & CEPE Net-2020 105 91 (2021)
https://doi.org/10.1007/978-3-030-75793-9_10
Layer inspection via digital imaging and machine learning for in-process monitoring of fused filament fabrication
Arianna Rossi, Michele Moretti and Nicola SeninJournal of Manufacturing Processes 70 438 (2021)
https://doi.org/10.1016/j.jmapro.2021.08.057
In situ monitoring for fused filament fabrication process: A review
Yanzhou Fu, Austin Downey, Lang Yuan, Avery Pratt and Yunusa BalogunAdditive Manufacturing 38 101749 (2021)
https://doi.org/10.1016/j.addma.2020.101749
A digital twin strategy for major failure detection in fused deposition modeling processes
Christopher M. Henson, Nathan I. Decker and Qiang HuangProcedia Manufacturing 53 359 (2021)
https://doi.org/10.1016/j.promfg.2021.06.039
12745 647 (2021)
https://doi.org/10.1007/978-3-030-77970-2_50
In-Situ Print Characterization and Defect Monitoring of 3D Printing via Conductive Filament and Ohm’s Law
Helen Parker, Sean Psulkowski, Phong Tran and Tarik DickensProcedia Manufacturing 53 417 (2021)
https://doi.org/10.1016/j.promfg.2021.06.044
Process monitoring for material extrusion additive manufacturing: a state-of-the-art review
Alexander Oleff, Benjamin Küster, Malte Stonis and Ludger OvermeyerProgress in Additive Manufacturing 6 (4) 705 (2021)
https://doi.org/10.1007/s40964-021-00192-4
Image-based failure detection for material extrusion process using a convolutional neural network
Hyungjung Kim, Hyunsu Lee, Ji-Soo Kim and Sung-Hoon AhnThe International Journal of Advanced Manufacturing Technology 111 (5-6) 1291 (2020)
https://doi.org/10.1007/s00170-020-06201-0
Real-Time 3D Printing Remote Defect Detection (Stringing) with Computer Vision and Artificial Intelligence
Konstantinos Paraskevoudis, Panagiotis Karayannis and Elias P. KoumoulosProcesses 8 (11) 1464 (2020)
https://doi.org/10.3390/pr8111464
Detection of Material Extrusion In-Process Failures via Deep Learning
Zhicheng Zhang, Ismail Fidan and Michael AllenInventions 5 (3) 25 (2020)
https://doi.org/10.3390/inventions5030025
Optische Qualitätsprüfung für die additive Materialextrusion
Alexander Oleff, Benjamin Küster, Maltey Stonis and Ludger OvermeyerZeitschrift für wirtschaftlichen Fabrikbetrieb 115 (1-2) 52 (2020)
https://doi.org/10.3139/104.112228
426 (2020)
https://doi.org/10.1109/IRC.2020.00077
1 (2020)
https://doi.org/10.1109/SIMS49386.2020.9121578
Machines as Craftsmen: Localized Parameter Setting Optimization for Fused Filament Fabrication 3D Printing
John M. Gardner, Kevin A. Hunt, Austin B. Ebel, Evan S. Rose, Sean C. Zylich, Benjamin D. Jensen, Kristopher E. Wise, Emilie J. Siochi and Godfrey SautiAdvanced Materials Technologies 4 (3) (2019)
https://doi.org/10.1002/admt.201800653
Technology Trend of Construction Additive Manufacturing
Jinsu Park, Kyungteak Kim and Hanshin ChoiJournal of Korean Powder Metallurgy Institute 26 (6) 528 (2019)
https://doi.org/10.4150/KPMI.2019.26.6.528
87 (2019)
https://doi.org/10.1109/CSUDET47057.2019.9214635
Defect Identification and Mitigation Via Visual Inspection in Large-Scale Additive Manufacturing
Michael Borish, Brian K. Post, Alex Roschli, et al.JOM 71 (3) 893 (2019)
https://doi.org/10.1007/s11837-018-3220-6
IoT-enabled cloud-based additive manufacturing platform to support rapid product development
Yuanbin Wang, Yuan Lin, Ray Y. Zhong and Xun XuInternational Journal of Production Research 57 (12) 3975 (2019)
https://doi.org/10.1080/00207543.2018.1516905
Dynamic condition monitoring for 3D printers by using error fusion of multiple sparse auto-encoders
Shaohui Zhang, Zhenzhong Sun, Jianyu Long, Chuan Li and Yun BaiComputers in Industry 105 164 (2019)
https://doi.org/10.1016/j.compind.2018.12.004
1 (2018)
https://doi.org/10.1109/ICT-ROBOT.2018.8549891
Three Hundred and Sixty Degree Real-Time Monitoring of 3-D Printing Using Computer Analysis of Two Camera Views
Siranee Nuchitprasitchai, Michael Roggemann and Joshua PearceJournal of Manufacturing and Materials Processing 1 (1) 2 (2017)
https://doi.org/10.3390/jmmp1010002
Abstract API for 3D printing hardware and software resources
Felix W. Baumann, Oliver Kopp and Dieter RollerThe International Journal of Advanced Manufacturing Technology 92 (1-4) 1519 (2017)
https://doi.org/10.1007/s00170-017-0260-y
Factors effecting real-time optical monitoring of fused filament 3D printing
Siranee Nuchitprasitchai, Michael Roggemann and Joshua M. PearceProgress in Additive Manufacturing 2 (3) 133 (2017)
https://doi.org/10.1007/s40964-017-0027-x
Cooperative Design, Visualization, and Engineering
Felix Baumann, Julian Eichhoff and Dieter RollerLecture Notes in Computer Science, Cooperative Design, Visualization, and Engineering 9929 77 (2016)
https://doi.org/10.1007/978-3-319-46771-9_10