Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

Examining the Relationship between Forces During Stereolithography 3D Printing and Geometric Parameters of the Model

Iaroslav Kovalenko, Maryna Garan, Andrii Shynkarenko, Petr Zelený, Jiří Šafka

MATEC Web of Conferences, 40 (2016) 02005

Published online: 2016-01-29

DOI: https://doi.org/10.1051/matecconf/20164002005

This article has been cited by the following article(s):

Development, 3D printing, and mechanics of novel auxetic unit cell monostructures

Celia Rufo-Martín, Diego Infante-García, José Díaz-Álvarez, María Henar Miguélez, Behrad Koohbor and George Youssef
Thin-Walled Structures 208 112859 (2025)
https://doi.org/10.1016/j.tws.2024.112859

Celia Rufo-Martín, Diego Infante-García, José Díaz-Álvarez, María Henar Miguélez, Behrad Koohbor and George Youssef
(2024)
https://doi.org/10.2139/ssrn.4850291

Using Taguchi method and gray relational analysis to enhance manufacturing performance in photopolymerization

Po-Tuan Chen and Cheng-Jung Yang
Progress in Additive Manufacturing 9 (6) 2393 (2024)
https://doi.org/10.1007/s40964-024-00593-1

A Review of Critical Issues in High-Speed Vat Photopolymerization

Sandeep Kumar Paral, Ding-Zheng Lin, Yih-Lin Cheng, Shang-Chih Lin and Jeng-Ywan Jeng
Polymers 15 (12) 2716 (2023)
https://doi.org/10.3390/polym15122716

Comprehensive performance of a low-cost spring-assisted mechanism for digital light processing

Cheng-Jung Yang and Sin-Syuan Wu
The International Journal of Advanced Manufacturing Technology 125 (9-10) 4099 (2023)
https://doi.org/10.1007/s00170-023-10977-2

Cheng-Jung Yang and Sin-Syuan Wu
(2022)
https://doi.org/10.21203/rs.3.rs-2173901/v1

Optimizing Manufacturing Parameters of DLP Machine by Taguchi Method and Desirability Approach

Cheng-Jung Yang
Machines 10 (10) 901 (2022)
https://doi.org/10.3390/machines10100901

Spring Assisting Mechanism for Enhancing the Separation Performance of Digital Light Process 3D Printers

Yu-Sheng Lin and Cheng-Jung Yang
IEEE Access 7 71718 (2019)
https://doi.org/10.1109/ACCESS.2019.2920004

Investigation of separation force for constrained-surface stereolithography process from mechanics perspective

Hang Ye, Abhishek Venketeswaran, Sonjoy Das and Chi Zhou
Rapid Prototyping Journal 23 (4) 696 (2017)
https://doi.org/10.1108/RPJ-06-2016-0091