The Citing articles tool gives a list of articles citing the current article. The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
This article has been cited by the following article(s):
Dissolution of η phase and evolution of dynamically recrystallized grains in ATI 718Plus superalloy during hot compressive deformation
Lu Lin, Pingwei Xu, Panzhi Wang, Yingfei Guo, Yayun Li, Junpeng Ren, Lei Zhou, Yilong Liang and Yu Liang Journal of Materials Research and Technology (2024) https://doi.org/10.1016/j.jmrt.2024.04.172
The influence of crack and interface oxidation on dwell fatigue crack propagation behavior of the nickel-base superalloy ATI A718Plus
A. Kirchmayer, D. Hausmann, S. Gabel, M. Pröbstle, S. Giese, M. Göken, D. Hünert and S. Neumeier Metallurgical and Materials Transactions A 55(3) 803 (2024) https://doi.org/10.1007/s11661-023-07286-4
Influence of Grain Size and Volume Fraction of η/δ Precipitates on the Dwell Fatigue Crack Propagation Rate and Creep Resistance of the Nickel-Base Superalloy ATI 718Plus
A. Kirchmayer, M. Pröbstle, D. Huenert, S. Neumeier and M. Göken Metallurgical and Materials Transactions A 54(6) 2219 (2023) https://doi.org/10.1007/s11661-023-07001-3
Decomposition of the Laves phase in the fusion zone of the Inconel 718/ATI 718Plus® welded joint during isothermal holding at a temperature of 649 °C
High-Temperature Deformation Behavior of 718Plus: Consideration of γ′ Effects
Utkudeniz Ozturk, Jose Maria Cabrera, Jessica Calvo, Abdelkrim Redjaïmia and Jaâfar Ghanbaja Materials Performance and Characterization 9(2) 57 (2020) https://doi.org/10.1520/MPC20190031
Simulation of anisotropic crack growth behavior of nickel base alloys under thermomechanical fatigue
Determination of Anisotropic Mechanical Properties for Materials Processed by Laser Powder Bed Fusion
Even W. Hovig, Amin S. Azar, Frode Grytten, Knut Sørby, Erik Andreassen and Marco Rossi Advances in Materials Science and Engineering 2018(1) (2018) https://doi.org/10.1155/2018/7650303
On the crystallography and composition of topologically close-packed phases in ATI 718Plus®
Robert Krakow, Duncan N. Johnstone, Alexander S. Eggeman, Daniela Hünert, Mark C. Hardy, Catherine M.F. Rae and Paul A. Midgley Acta Materialia 130 271 (2017) https://doi.org/10.1016/j.actamat.2017.03.038
High-Temperature Deformation of Inconel 718PlusTM
Utkudeniz Ozturk, Jose Maria Cabrera and Jessica Calvo Journal of Engineering for Gas Turbines and Power 139(3) 032101 (2017) https://doi.org/10.1115/1.4034539
On three-dimensional misorientation spaces
Robert Krakow, Robbie J. Bennett, Duncan N. Johnstone, et al. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences 473(2206) 20170274 (2017) https://doi.org/10.1098/rspa.2017.0274
Grain boundary precipitation in Inconel 718 and ATI 718Plus