Formation of intermetallic phases during solidification in Al-Mg-Mn 5xxx alloys with various Mg levels
MATEC Web Conf., 326 (2020) 02002
Published online: 2020-11-05
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Fabrication and Characterization of Hybrid Surface Composite Al5083/(SiC + TiO2) Using Cooling-Assisted Friction Stir Processing
Vishal Bhojak and Jinesh Kumar JainTransactions of the Indian Institute of Metals 78 (1) (2025)
https://doi.org/10.1007/s12666-024-03475-w
Multimodal 3D quantification of particle stimulated nucleation in industrially manufactured aluminium AA5182 sheet
E.F.F. Knipschildt-Okkels, Y.B. Zhang, X. Lei, T. Yu, W. Liu, S. Fæster, R.E. Sanders and D. Juul JensenActa Materialia 282 120446 (2025)
https://doi.org/10.1016/j.actamat.2024.120446
1304 (2025)
https://doi.org/10.1007/978-3-031-80676-6_162
Semisolid tensile properties near solidus temperature of direct-chill-cast AA5182 alloy and its hot-tearing susceptibility
Mohamed Qassem, Daniel Larouche, Mousa Javidani, Josée Colbert and X.-Grant ChenJournal of Materials Science 59 (17) 7457 (2024)
https://doi.org/10.1007/s10853-024-09625-1
Anomalous Mitigation in Phase Evolution Impacting Thermal Stability in a Rapidly Solidified AA5182 Al–Mg Alloy via Continuous Thin‐Strip Casting
Hesam Pouraliakbar, Andrew Howells, Mark Gallerneault and Vahid FallahAdvanced Engineering Materials 26 (3) (2024)
https://doi.org/10.1002/adem.202301610
Advancing Sustainable Aluminum Alloy Development via Comprehensive 3D Morphological and Compositional Characterization of Fe-Rich Intermetallic Particles
Satyaroop Patnaik, Eshan Ganju, XiaoXiang Yu, Minju Kang, Jaeseuck Park, DaeHoon Kang, Rajeev Kamat, John Carsley and Nikhilesh ChawlaMetallurgical and Materials Transactions A 55 (10) 3762 (2024)
https://doi.org/10.1007/s11661-024-07552-z
Mechanical and corrosion performances of Al–Mg-Mn 5083 rolled alloys microalloyed with Sc and Zr in different thermomechanical processing conditions
Ahmed Y. Algendy, Paul Rometsch and X.-Grant ChenJournal of Materials Science 59 (31) 14692 (2024)
https://doi.org/10.1007/s10853-024-10044-5
Synergistic Effects of Mg Alloying and Subsequent Homogenization Treatment to Improve the Microstructure and Properties of Al-Mg-Mn Alloys
Chengcheng Chen, Xiangjie Wang, Yajun Xu, Zhaoxi Song, Fang Yu, Zhaosong Zhang, Jianzhong Cui and Dongfu SongJournal of Materials Engineering and Performance (2024)
https://doi.org/10.1007/s11665-024-09931-4
Evolution of precipitation and mechanical properties of high-pressure vacuum die- cast AlSi10MgMn alloy in T5 and T6 heat treated states
Zhan Zhang, Zhixing Chen, Lei Pan and X.-Grant ChenJournal of Materials Science 59 (36) 17219 (2024)
https://doi.org/10.1007/s10853-024-10169-7
Overview on aluminium alloys as sinks for end-of-life vehicle scrap
Stefan Pogatscher and Sebastian SambergerIOP Conference Series: Materials Science and Engineering 1315 (1) 012008 (2024)
https://doi.org/10.1088/1757-899X/1315/1/012008
Sustainable extraction and recycling of non-ferrous metals: a review from a European perspective
Eva Gerold, Lea Luznik, Sebastian Samberger and Helmut AntrekowitschPhilosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences 382 (2284) (2024)
https://doi.org/10.1098/rsta.2024.0173
Effect of Mn‐Bearing Dispersoids on Tensile Properties and Recrystallization Resistance of Al‐3Mg‐0.8Mn Rolled Alloy
Ahmed Y. Algendy, Kun Liu and X.-Grant ChenAdvanced Engineering Materials 25 (19) (2023)
https://doi.org/10.1002/adem.202300667
The improvement mechanism of good matching between electrical conductivity and mechanical properties for Al-4Si-0.8Mg-0.6Fe alloy
Xiaoli Cui, Hui Ye, Houyun Liu, et al.Journal of Alloys and Compounds 938 168275 (2023)
https://doi.org/10.1016/j.jallcom.2022.168275
Achieving superior dispersion-strengthening effect in an AA5xxx Al-Mg-Mn alloy by mico-alloying
Shiwei Pan, Zidong Wang, Chunan Li, et al.Materials & Design 226 111647 (2023)
https://doi.org/10.1016/j.matdes.2023.111647
267 (2023)
https://doi.org/10.1007/978-3-031-38141-6_31
Synergetic effects of cryo-FSP on microstructural, mechanical and corrosion behavior of stir cast AA5083-2 wt% SiC nanocomposite
Gaurav Rajan and Suhrit MulaJournal of Manufacturing Processes 106 19 (2023)
https://doi.org/10.1016/j.jmapro.2023.09.073
Making sustainable aluminum by recycling scrap: The science of “dirty” alloys
Dierk Raabe, Dirk Ponge, Peter J. Uggowitzer, et al.Progress in Materials Science 128 100947 (2022)
https://doi.org/10.1016/j.pmatsci.2022.100947
Revealing the influence of Fe on Fe-rich phases formation and mechanical properties of cast Al-Mg-Mn-Fe alloys
Yuliang Zhao, Dongfu Song, Haoliang Wang, et al.Journal of Alloys and Compounds 901 163666 (2022)
https://doi.org/10.1016/j.jallcom.2022.163666
Mg effect on the cryogenic temperature toughness of Al-Mg alloys
Kwangtae Son, Michael E. Kassner, Tae-Kyu Lee and Ji-Woon LeeMaterials & Design 224 111336 (2022)
https://doi.org/10.1016/j.matdes.2022.111336
Influence of Fe and Mn on the Microstructure Formation in 5xxx Alloys—Part II: Evolution of Grain Size and Texture
Jakob Grasserbauer, Irmgard Weißensteiner, Georg Falkinger, Peter J. Uggowitzer and Stefan PogatscherMaterials 14 (12) 3312 (2021)
https://doi.org/10.3390/ma14123312
Influence of Fe and Mn on the Microstructure Formation in 5xxx Alloys—Part I: Evolution of Primary and Secondary Phases
Jakob Grasserbauer, Irmgard Weißensteiner, Georg Falkinger, Thomas M. Kremmer, Peter J. Uggowitzer and Stefan PogatscherMaterials 14 (12) 3204 (2021)
https://doi.org/10.3390/ma14123204
Evolution of dispersoids during multistep heat treatments and their effect on rolling performance in an Al-5% Mg-0.8% Mn alloy
Ahmed Y. Algendy, Kun Liu and X. Grant ChenMaterials Characterization 181 111487 (2021)
https://doi.org/10.1016/j.matchar.2021.111487