Detailed investigation of the shearing mechanism of β" precipitates in Al-Mg-Si alloys
MATEC Web Conf., 326 (2020) 01005
Published online: 2020-11-05
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Strength-elongation synergy via controlled precipitation hardening in counter pressure cast Al-7Si-0.35 Mg casting alloy with T5 heat treatment
Saif Haider Kayani, Tae-Min Koo, Soo-Bae Kim, Jung-Moo Lee, Kwangjun Euh and Young-Hee ChoMaterials Science and Engineering: A 939 148503 (2025)
https://doi.org/10.1016/j.msea.2025.148503
Effect of cold drawing on the microstructure and property of precipitation strengthening Al–Mg–Si–Cu alloy prepared by continuous casting-extrusion
Jiaxin Li, Minqiang Gao, Li Yang, Changbin Shen and Renguo GuanMaterials Science and Engineering: A 922 147669 (2025)
https://doi.org/10.1016/j.msea.2024.147669
An insight into the influence of precipitation phase on the surface quality in diamond turning Al alloy
Guilin Zhuang, Hanzhong Liu, Zhimin Cao, Zhipeng Cui, Yifu Tang and Wenjun ZongInternational Journal of Machine Tools and Manufacture 104163 (2024)
https://doi.org/10.1016/j.ijmachtools.2024.104163
Quantified effect of quench rate on the microstructures and mechanical properties of an Al–Mg–Si alloy
Mingjun Yang, Zhixiang Ruan, Han Lin, Kai Li, Mingbo Yang, Zhixiu Wang, Xinyue Lan, Yi Xie, Yao Xiao, Qiao Yan, Ruanfei Li and Yong DuJournal of Materials Research and Technology 24 6753 (2023)
https://doi.org/10.1016/j.jmrt.2023.04.178
Application of electron beam welding technique for joining coarse-grained and ultrafine-grained plates from Al-Mg-Si alloy
Marta Lipińska, Florian Pixner, Ireneusz Szachogłuchowicz, Florian Mittermayr, Cyrill Grengg, Norbert Enzinger and Małgorzata LewandowskaJournal of Manufacturing Processes 104 28 (2023)
https://doi.org/10.1016/j.jmapro.2023.08.057
On the shearing mechanisms of β" precipitates by the dislocations gliding on the {100}Al planes in Al–7Si–Mg alloys
Yifan Wang, Yanli Lu, Yan Li, et al.Materials Science and Engineering: A 845 143152 (2022)
https://doi.org/10.1016/j.msea.2022.143152
Modeling of precipitate strengthening with near-chemical accuracy: case study of Al-6xxx alloys
Yi Hu and W.A. CurtinActa Materialia 237 118144 (2022)
https://doi.org/10.1016/j.actamat.2022.118144
Advanced method for structure-strength-ductility assessment of dispersion-strengthened FCC metals using activation work, mean slip distance and constitutive relation analyses: Decoding the Haasen plot
S. Saimoto and B.J. DiakMaterials Science and Engineering: A 828 142119 (2021)
https://doi.org/10.1016/j.msea.2021.142119
Near-Chemically-Accurate Modeling of Precipitate Strengthening: Case Study of Al-6xxx Alloys
Yi Hu and W. A. CurtinSSRN Electronic Journal (2021)
https://doi.org/10.2139/ssrn.3972239