Atomization of Ti-64 alloy using the EIGA process: comparison of the characteristics of powders produced in labscale and industrial-scale facilities
MATEC Web Conf., 321 (2020) 07013
Published online: 2020-10-12
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Toward sustainable metal additive manufacturing: Environmental hotspots and circularity pathways
Su Kunt, Metin U. Salamcı, Mehmet Kabak and Emre AlpJournal of Environmental Management 398 128580 (2026)
https://doi.org/10.1016/j.jenvman.2026.128580
Spherical titanium powder production for 3D printing by plasma-arc atomization of wire materials
V.M. Korzhyk, D.V. Strohonov, O.S. Tereshchenko, O.V. Ganushchak, A.Yu. Tunik, V.A. Kostin, S.L. Chygileichyk and V.K. YuliuhinSovremennaâ èlektrometallurgiâ 2025 (2) 30 (2025)
https://doi.org/10.37434/sem2025.02.05
Pin-Type Bearing Strength and Fracture Behaviour of Ductile LPBF Ti-6Al-4V ELI Produced with Extensively Reused Powder
Duncan W. Gibbons and Andre F. van der MerweJOM 77 (4) 1885 (2025)
https://doi.org/10.1007/s11837-025-07162-z
Parametric LCA model for Ti6Al4V powder production
Christian Spreafico and Baris ÖrdekCleaner Engineering and Technology 101032 (2025)
https://doi.org/10.1016/j.clet.2025.101032
Spherical titanium powder production for 3D printing by plasma-arc atomization of wire materials
V.M. Korzhyk, D.V. Strohonov, O.S. Tereshchenko, O.V. Ganushchak, A.Yu. Tunik, V.A. Kostin, S.L. Chygileichyk and V.K. YuliuhinThe Paton Welding Journal 2025 (5) 3 (2025)
https://doi.org/10.37434/tpwj2025.05.01
112 79 (2025)
https://doi.org/10.1007/978-981-96-4459-9_8
Prospective life cycle assessment of titanium powder atomization
Christian SpreaficoJournal of Cleaner Production 143104 (2024)
https://doi.org/10.1016/j.jclepro.2024.143104
Development of plasma-arc technologies of spherical granules production for additive manufacturing and powder metallurgy
Korzhyk V.m., Strohonov D.v., Burlachenko O.m., Voitenko O.m. and Kunitskyi D.v.Avtomatičeskaâ svarka (Kiev) 2023 (11) 37 (2023)
https://doi.org/10.37434/as2023.11.04
Laser Powder Bed Fusion Additive Manufacturing of Recycled Zircaloy-4
Soung Yeoul Ahn, Sang Guk Jeong, Eun Seong Kim, Suk Hoon Kang, Jungho Choe, Joo Young Ryu, Dae Woon Choi, Jin Seok Lee, Jung-Wook Cho, Takayoshi Nakano and Hyoung Seop KimMetals and Materials International 29 (9) 2760 (2023)
https://doi.org/10.1007/s12540-023-01400-2
Development of plasma-arc technologies of spherical granules production for additive manufacturing and powder metallurgy
V.M. Korzhyk, D.V. Strohonov, O.M. Burlachenko, O.M. Voitenko and D.V. KunitskyiThe Paton Welding Journal 2023 (12) 3 (2023)
https://doi.org/10.37434/tpwj2023.12.01
Solid-state processing of surplus aluminium alloy powders through a combination of field-assisted sintering technology and hot rolling
S. J. Graham, A. Patel, B. Fernandez Silva, W. Stott, G. J. Baxter, M. Roscher and M. JacksonPowder Metallurgy 66 (3) 187 (2023)
https://doi.org/10.1080/00325899.2023.2171582
Swirling supersonic gas flow in an EIGA atomizer for metal powder production: Numerical investigation and experimental validation
Baraa Qaddah, Pierre Chapelle, Jean Pierre Bellot, Julien Jourdan, Nicolas Rimbert, Agathe Deborde, Raphael Hammes and Aurélie FranceschiniJournal of Materials Processing Technology 311 117814 (2023)
https://doi.org/10.1016/j.jmatprotec.2022.117814