Mode II fracture toughness of asymmetric metal-composite adhesive joints
MATEC Web Conf., 304 (2019) 01004
Published online: 2019-12-17
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Effect of low temperature on interlaminar fracture toughness of multi-directional CFRP and CFRP-steel interfaces
J. Koord and C. HühneComposites Part B: Engineering 281 111540 (2024)
https://doi.org/10.1016/j.compositesb.2024.111540
Experimental and numerical investigation on test methods for mode II fracture of composite‐titanium adhesively bonded structures
Jian Wang, Huiming Ding, Junxia Jiang and Yunbo BiFatigue & Fracture of Engineering Materials & Structures 46 (10) 3766 (2023)
https://doi.org/10.1111/ffe.14104
Fracture analysis of composite-titanium adhesively bonded joints under mode-Ⅰ loading
Jian Wang, Huiming Ding, Junxia Jiang and Yunbo BiEngineering Fracture Mechanics 291 109561 (2023)
https://doi.org/10.1016/j.engfracmech.2023.109561
Effect of low temperature on mode I and mode II interlaminar fracture toughness of CFRP-steel hybrid laminates
J. Koord, O. Völkerink, E. Petersen and C. HühneComposites Part B: Engineering 262 110773 (2023)
https://doi.org/10.1016/j.compositesb.2023.110773
Progressive damage analysis of functionally graded dental implants due to pre-tightening loads using extended finite element method
Ali Mohammadi Anari and Ehsan SelahiJournal of the Brazilian Society of Mechanical Sciences and Engineering 44 (7) (2022)
https://doi.org/10.1007/s40430-022-03581-0
Crack initiation and growth simulations of functionally graded dental implant subjected to cyclic axial loads
Ali Mohammadi Anari and Ehsan SelahiFatigue & Fracture of Engineering Materials & Structures 45 (11) 3123 (2022)
https://doi.org/10.1111/ffe.13802
Experimental study of nanocomposite hybrid adhesive-rivet joints
Nabard Habibi and Shadi RamezaniArchives of Civil and Mechanical Engineering 21 (3) (2021)
https://doi.org/10.1007/s43452-021-00255-x
Structural safety evaluation of adhesive bonds: A fracture analytical approach
Martin Brandtner-HafnerEngineering Failure Analysis 123 105289 (2021)
https://doi.org/10.1016/j.engfailanal.2021.105289
Mode I fracture toughness of asymmetric metal-composite adhesive joints
Theodoros Loutas, Panayiotis Tsokanas, Vassilis Kostopoulos, Peter Nijhuis and Wouter M. van den BrinkMaterials Today: Proceedings 34 250 (2021)
https://doi.org/10.1016/j.matpr.2020.03.075
Challenges in the fatigue crack growth characterization of metal/composite joints: A compliance-based investigation of a Ti/CFRP joint
Lucas Adamos and Theodoros LoutasInternational Journal of Fatigue 148 106233 (2021)
https://doi.org/10.1016/j.ijfatigue.2021.106233
An experimental study of the interfacial fracture behavior of Titanium/CFRP adhesive joints under mode I and mode II fatigue
Lucas Adamos, Panayiotis Tsokanas and Theodoros LoutasInternational Journal of Fatigue 136 105586 (2020)
https://doi.org/10.1016/j.ijfatigue.2020.105586
Interfacial Fracture Toughness Assessment of a New Titanium–CFRP Adhesive Joint: An Experimental Comparative Study
Panayiotis Tsokanas, Theodoros Loutas and Peter NijhuisMetals 10 (5) 699 (2020)
https://doi.org/10.3390/met10050699