EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues MATEC Web Conf., 300 (2019) 01003 Article references

Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

Effect of surface topography on the fatigue behavior of additively manufactured Ti6Al4V and CoCr alloys

Amanda Heimbrook and Ken Gall
Materials Science and Engineering: A 909 146821 (2024)
https://doi.org/10.1016/j.msea.2024.146821

A systematic review on high cycle and very high cycle fatigue behavior of laser powder bed fused (L-PBF) Al-Si alloys

Md Mehide Hasan Tusher and Ayhan Ince
Engineering Failure Analysis 154 107667 (2023)
https://doi.org/10.1016/j.engfailanal.2023.107667

Effect of stress‐relieved heat treatment on very high cycle fatigue performance of additive manufactured Ti‐6Al‐4V alloy

Md Mehide Hasan Tusher and Ayhan Ince
Fatigue & Fracture of Engineering Materials & Structures 46 (10) 3982 (2023)
https://doi.org/10.1111/ffe.14119

A state-of-the-art review on fatigue performance of powder bed fusion-built alloy 718

Esmaeil Sadeghi, Paria Karimi, Reza Esmaeilizadeh, et al.
Progress in Materials Science 133 101066 (2023)
https://doi.org/10.1016/j.pmatsci.2022.101066

High Cycle Fatigue and Very High Cycle Fatigue Performance of Selective Laser Melting Ti-6Al-4V Titanium Alloy—A Review

Md Mehide Hasan Tusher and Ayhan Ince
Materials Performance and Characterization 12 (2) 214 (2023)
https://doi.org/10.1520/MPC20220088

A review and a statistical analysis of porosity in metals additively manufactured by laser powder bed fusion

Dawei Wang, Huili Han, Bo Sa, et al.
Opto-Electronic Advances 5 (10) 210058 (2022)
https://doi.org/10.29026/oea.2022.210058

Surface roughness effect on multiaxial fatigue behavior of additively manufactured Ti6Al4V alloy

Danilo A. Renzo, Carmine Maletta, Emanuele Sgambitterra, Franco Furgiuele and Filippo Berto
International Journal of Fatigue 163 107022 (2022)
https://doi.org/10.1016/j.ijfatigue.2022.107022

Simultaneous optimization of topology and print orientation for transversely isotropic fatigue

Asbjørn M. Olesen, Sebastian M. Hermansen and Erik Lund
Structural and Multidisciplinary Optimization 64 (3) 1041 (2021)
https://doi.org/10.1007/s00158-021-02995-z

Notched fatigue of additive manufactured metals under axial and multiaxial loadings, Part I: Effects of surface roughness and HIP and comparisons with their wrought alloys

Reza Molaei, Ali Fatemi and Nam Phan
International Journal of Fatigue 143 106003 (2021)
https://doi.org/10.1016/j.ijfatigue.2020.106003

Fatigue performance of additive manufactured metals under variable amplitude service loading conditions including multiaxial stresses and notch effects: Experiments and modelling

Reza Molaei and Ali Fatemi
International Journal of Fatigue 145 106002 (2021)
https://doi.org/10.1016/j.ijfatigue.2020.106002