Mechanical properties of 3D printed composites with ABS/ASA substrate and glass fiber inserts
MATEC Web Conf., 290 (2019) 04002
Published online: 2019-08-21
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Optimization of Roughness, Dimensional Conformity, and Porosity of 3D-Printed ASA with MEX: Impact of Critical Process Control Parameters
Dimitrios Sagris, Constantine David, Markos Petousis, Nektarios K. Nasikas, Nikolaos Mountakis, Maria Spyridaki and Nectarios VidakisACS Omega 10 (47) 57286 (2025)
https://doi.org/10.1021/acsomega.5c07437
Optimization of FFF parameters for mechanical performance enhancement of ASA polymer in outdoor applications
Sagar Kailas Gawali and Prashant Kumar JainInternational Journal on Interactive Design and Manufacturing (IJIDeM) 19 (10) 7147 (2025)
https://doi.org/10.1007/s12008-025-02272-z
Process optimization of material extrusion additive manufacturing with ASA: robust design and predictive models for engineering response metrics
Markos Petousis, Nikolaos Mountakis, Maria Spyridaki, Katerina Gkagkanatsiou, Ioannis Valsamos, Amalia Moutsopoulou, Emmanuel Stratakis and Nectarios VidakisThe International Journal of Advanced Manufacturing Technology 138 (9-10) 4431 (2025)
https://doi.org/10.1007/s00170-025-15779-2
Feasibility Study of Polymer‐Based Stamping Devices Manufactured via Material Extrusion Additive Manufacturing for Small‐Batch Production and Prototyping
Cristian Giolu and Cătălin Gheorghe AmzaMacromolecular Symposia 414 (3) (2025)
https://doi.org/10.1002/masy.70055
114 31 (2025)
https://doi.org/10.1007/978-981-96-4718-7_3
Load bearing investigations on novel Acrylonitrile butadiene styrene‐carbon quantum dots 3D printed core/bamboo fiber polyester sandwich composite for structural applications
Hassan Alshahrani and V. R. Arun PrakashPolymer Composites 45 (4) 3081 (2024)
https://doi.org/10.1002/pc.27972
1 (2024)
https://doi.org/10.1109/NMITCON62075.2024.10699031
Polylactic acid effectively reinforced with reduced graphitic oxide
Alejandra De La Cruz Natera, Adriana Cordero García, Juan Restrepo Betancourt, Mary Judith Arias Tapia and Oscar Vargas CeballosJournal of Polymer Engineering 42 (8) 736 (2022)
https://doi.org/10.1515/polyeng-2021-0363
Novel Drone Design Using an Optimization Software with 3D Model, Simulation, and Fabrication in Drone Systems Research
Ahmed. O. MohamedZain, Huangshen Chua, Kianmeng Yap, Pavithren Uthayasurian and Teoh JiehanDrones 6 (4) 97 (2022)
https://doi.org/10.3390/drones6040097
Embedding Ultra-High-Molecular-Weight Polyethylene Fibers in 3D-Printed Polylactic Acid (PLA) Parts
Cătălin Gheorghe Amza, Aurelian Zapciu, Arnheiður Eyþórsdóttir, Auðbjörg Björnsdóttir and Jonathan BorgPolymers 11 (11) 1825 (2019)
https://doi.org/10.3390/polym11111825