EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues MATEC Web Conf., 254 (2019) 05014 Article references

Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

Assessment of the Hazards Occurring During the Thermal Decomposition and Combustion Process in a Toothed Belt Transmission

Łukasz Warguła, Piotr Kaczmarzyk, Bartosz Wieczorek, Daniel Małozięć and Anna Dziechciarz
Materials 18 (7) 1637 (2025)
https://doi.org/10.3390/ma18071637

Modeling the damages of belt gears

Gawrońska Elżbieta, Domek Grzegorz, Krawiec Piotr and Kołodziej Andrzej
IOP Conference Series: Materials Science and Engineering 1199 (1) 012017 (2021)
https://doi.org/10.1088/1757-899X/1199/1/012017

Development of a Testing Station for Empirical Verification of the Algebraic Model of Dry Ice Piston Extrusion

Jan Górecki
Acta Mechanica et Automatica 15 (3) 107 (2021)
https://doi.org/10.2478/ama-2021-0015

Preliminary analysis of the sensitivity of the FEM model of the process of dry ice extrusion in the die with a circularly converging channel on the changing its geometrical parameters

J Górecki
IOP Conference Series: Materials Science and Engineering 1199 (1) 012006 (2021)
https://doi.org/10.1088/1757-899X/1199/1/012006

The problem of fixing the axisymmetric elements on the example of pulley mounting on the shaft

G Domek, A Kołodziej and I Dziubek
IOP Conference Series: Materials Science and Engineering 776 (1) 012070 (2020)
https://doi.org/10.1088/1757-899X/776/1/012070

The application of the Finite Element Method analysis in the process of designing the punching die for belt perforation

D Wojtkowiak, K Talaśka and A Fierek
IOP Conference Series: Materials Science and Engineering 776 (1) 012057 (2020)
https://doi.org/10.1088/1757-899X/776/1/012057

Analysis of the guiding column and sleeve cooperation in the linear slide bearing of the punching die head-punch block

D Wojtkowiak, K Talaśka and M Berdychowski
IOP Conference Series: Materials Science and Engineering 776 (1) 012055 (2020)
https://doi.org/10.1088/1757-899X/776/1/012055

Preliminary analysis of the sensitivity of the algebraic dry ice agglomeration model using multi-channel dies to change their geometrical parameters

J Górecki
IOP Conference Series: Materials Science and Engineering 776 (1) 012030 (2020)
https://doi.org/10.1088/1757-899X/776/1/012030

Experimental research of the mechanical properties of the round drive belts made of thermoplastic elastomer

K Wałęsa, I Malujda and J Górecki
IOP Conference Series: Materials Science and Engineering 776 012107 (2020)
https://doi.org/10.1088/1757-899X/776/1/012107

Designing of the Machine for Cutting Transport Belts: Conceptual Works

Aashutosh Kale, Aleksandra Biszczanik, Krzysztof Wałęsa, Mateusz Kukla, Maciej Berdychowski and Dominik Wilczyński
Acta Mechanica et Automatica 14 (3) 144 (2020)
https://doi.org/10.2478/ama-2020-0021

Process Analysis of the Hot Plate Welding of Drive Belts

Krzysztof Wałęsa, Ireneusz Malujda, Krzysztof Talaśka and Dominik Wilczyński
Acta Mechanica et Automatica 14 (2) 84 (2020)
https://doi.org/10.2478/ama-2020-0012

The influence of the limit stress value on the sublimation rate during the dry ice densification process

J Górecki, A Fierek, K Talaśka and K Wałęsa
IOP Conference Series: Materials Science and Engineering 776 (1) 012072 (2020)
https://doi.org/10.1088/1757-899X/776/1/012072

Shaping the Parameters of Cylindrical Belt Surface in the Joint Area

Krzysztof Wałęsa, Ireneusz Malujda and Dominik Wilczyński
Acta Mechanica et Automatica 13 (4) 255 (2019)
https://doi.org/10.2478/ama-2019-0035