The influence of geometrical parameters of the forming channel on the boundary value of the axial force in the agglomeration process of dry ice
MATEC Web Conf., 254 (2019) 05001
Published online: 2019-01-15
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Abrasive Technologies with Dry Ice as a Blasting Medium—Review
Aleksandra Dzido and Piotr KrawczykEnergies 16 (3) 1014 (2023)
https://doi.org/10.3390/en16031014
Aeroacoustic analysis of dry ice blasting on divergent nozzle length using CFD to acoustic couple simulation
Mohamad Nur Hidayat Mat, Norzelawati Asmuin, Md Faisal Md Basir, Mashhour A. Alazwari and Mohammad Reza SafaeiJournal of Thermal Analysis and Calorimetry 147 (11) 6437 (2022)
https://doi.org/10.1007/s10973-021-10931-y
The Algebraic Model of the Dry Ice Extrusion Process in a Die with a Conical-Cylindrical Channel
Jan Górecki, M. Macko, I. Rojek, M. Saga and D. MikołajewskiMATEC Web of Conferences 357 08001 (2022)
https://doi.org/10.1051/matecconf/202235708001
Preliminary analysis of the sensitivity of the FEM model of the process of dry ice extrusion in the die with a circularly converging channel on the changing its geometrical parameters
J GóreckiIOP Conference Series: Materials Science and Engineering 1199 (1) 012006 (2021)
https://doi.org/10.1088/1757-899X/1199/1/012006
Design and FEM strength analysis of an innovative design of a front loader with an extension dedicated to the KUBOTA M5
Łukasz Gierz, Tomasz Zwiachel, Mikołaj Spadło, et al.IOP Conference Series: Materials Science and Engineering 1199 (1) 012010 (2021)
https://doi.org/10.1088/1757-899X/1199/1/012010
Development of a Testing Station for Empirical Verification of the Algebraic Model of Dry Ice Piston Extrusion
Jan GóreckiActa Mechanica et Automatica 15 (3) 107 (2021)
https://doi.org/10.2478/ama-2021-0015
Operational parameters impact on the performance of dry-ice blasting nozzle
Aleksandra Dzido, Piotr Krawczyk, Krzysztof Badyda and Piotr ChondrokostasEnergy 214 118847 (2021)
https://doi.org/10.1016/j.energy.2020.118847
Experimental research of the thermoplastic belt plasticizing process in the hot plate welding
K Wałęsa, I Malujda and D WilczyńskiIOP Conference Series: Materials Science and Engineering 776 012011 (2020)
https://doi.org/10.1088/1757-899X/776/1/012011
Preliminary analysis of the sensitivity of the algebraic dry ice agglomeration model using multi-channel dies to change their geometrical parameters
J GóreckiIOP Conference Series: Materials Science and Engineering 776 (1) 012030 (2020)
https://doi.org/10.1088/1757-899X/776/1/012030
The influence of the limit stress value on the sublimation rate during the dry ice densification process
J Górecki, A Fierek, K Talaśka and K WałęsaIOP Conference Series: Materials Science and Engineering 776 (1) 012072 (2020)
https://doi.org/10.1088/1757-899X/776/1/012072
Analysis of the guiding column and sleeve cooperation in the linear slide bearing of the punching die head-punch block
D Wojtkowiak, K Talaśka and M BerdychowskiIOP Conference Series: Materials Science and Engineering 776 (1) 012055 (2020)
https://doi.org/10.1088/1757-899X/776/1/012055
The application of the Finite Element Method analysis in the process of designing the punching die for belt perforation
D Wojtkowiak, K Talaśka and A FierekIOP Conference Series: Materials Science and Engineering 776 (1) 012057 (2020)
https://doi.org/10.1088/1757-899X/776/1/012057
Multifactor analysis of experiment parameters on the example of the biomass cutting process
D WilczyńskiIOP Conference Series: Materials Science and Engineering 776 (1) 012013 (2020)
https://doi.org/10.1088/1757-899X/776/1/012013
The Cam-Clay model in the application of technological process modeling
M Berdychowski, D Wilczyński, K Talaśka and D WojtkowiakIOP Conference Series: Materials Science and Engineering 776 (1) 012067 (2020)
https://doi.org/10.1088/1757-899X/776/1/012067
Application of the Mohr-Coulomb model for simulating the biomass compaction process
M Berdychowski, K Talaśka, I Malujda and M KuklaIOP Conference Series: Materials Science and Engineering 776 (1) 012066 (2020)
https://doi.org/10.1088/1757-899X/776/1/012066
Numerical Analysis of Dry Ice Blasting Convergent-Divergent Supersonic Nozzle
Aleksandra Dzido, Piotr Krawczyk and Michalina Kurkus-GruszeckaEnergies 12 (24) 4787 (2019)
https://doi.org/10.3390/en12244787
Shaping the Parameters of Cylindrical Belt Surface in the Joint Area
Krzysztof Wałęsa, Ireneusz Malujda and Dominik WilczyńskiActa Mechanica et Automatica 13 (4) 255 (2019)
https://doi.org/10.2478/ama-2019-0035