Simulations CAE of wood pellet machine
MATEC Web Conf., 254 (2019) 02028
Published online: 2019-01-15
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Determining the Level of Structural and Mechanical Degradation of Steel in the Supporting Structure of Mining Excavation Machinery
Sorin Mihai Radu, Florin Vîlceanu, Mihaela Toderas, Alexandra Lihoacă and Stela DinescuProcesses 12 (1) 153 (2024)
https://doi.org/10.3390/pr12010153
Numerical analysis and optimization of large dimensioned structures considering stress concentrations in welded joint
Jaroslav Majko, Milan Sága, Zuzana Ságová, et al.MATEC Web of Conferences 357 02002 (2022)
https://doi.org/10.1051/matecconf/202235702002
Simulation of Kinematic and Strength Analysis of a Conical Shredder
Jakub Lewandowski, Daniel Łączny, Patrycja Bałdowska-Witos, et al.MATEC Web of Conferences 357 02021 (2022)
https://doi.org/10.1051/matecconf/202235702021
Design and Construction of an Innovative Particle Analyser
Daniel Łączny, Jakub Lewandowski, Weronika Kruszelnicka, et al.MATEC Web of Conferences 357 07006 (2022)
https://doi.org/10.1051/matecconf/202235707006
Simulation Tests of Working Press Loads under Pre-tensioned Body Conditions
Adam Mroziński, Marek Macko, M. Macko, et al.MATEC Web of Conferences 357 02017 (2022)
https://doi.org/10.1051/matecconf/202235702017
Computer-aided Eco-design Grinding Machines using Software SolidWorks Sustainability
Patrycja Bałdowska-Witos, Marek Macko, Daniel Łączny, et al.MATEC Web of Conferences 357 02022 (2022)
https://doi.org/10.1051/matecconf/202235702022
The Use of Simulation Software using the Discrete Element Method (DEM) for the Process of Materials Comminution
Weronika Kruszelnicka, Marek Macko, Daniel Łączny, et al.MATEC Web of Conferences 357 07005 (2022)
https://doi.org/10.1051/matecconf/202235707005
A Flexible Mechanism Based Vibration Isolator for Machine Tool Application
Nitin Vijay Satpute, Marek Iwaniec, M. Macko, et al.MATEC Web of Conferences 357 03008 (2022)
https://doi.org/10.1051/matecconf/202235703008
The Modern Conveyor System and its Construction
Lenka Jakubovičová, Milan Sága, Peter Kopas, et al.MATEC Web of Conferences 357 02010 (2022)
https://doi.org/10.1051/matecconf/202235702010
Development trends in belt transmissions with V-belt
Piotr Krawiec, Łukasz Warguła, Grzegorz Domek, et al.MATEC Web of Conferences 357 01003 (2022)
https://doi.org/10.1051/matecconf/202235701003
Selection of parameters during shredding of corn stalks as an additive to the polymer
M Macko, D Łączny and J LewandowskiIOP Conference Series: Materials Science and Engineering 1199 (1) 012061 (2021)
https://doi.org/10.1088/1757-899X/1199/1/012061
Technical solution of the modern conveyor system
L Jakubovičová, P Kopas, M Vaško and M HandrikIOP Conference Series: Materials Science and Engineering 1199 (1) 012031 (2021)
https://doi.org/10.1088/1757-899X/1199/1/012031
The research on the characteristic of the cutting force while chipping of the Caucasian Fir (Abies Nordmanniana) with a single-shaft wood chipper
Ł Warguła and P KrawiecIOP Conference Series: Materials Science and Engineering 776 (1) 012012 (2020)
https://doi.org/10.1088/1757-899X/776/1/012012
The Influence of the Use of Polymer Lining within the Roller Press Gravity Feeder on Briquette Quality
Michał BembenekPolymers 12 (11) 2489 (2020)
https://doi.org/10.3390/polym12112489