Mechanical properties of structures produced by 3D printing from composite materials
MATEC Web Conf., 254 (2019) 01018
Published online: 2019-01-15
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Design and Experimental Evaluation of a Dual-Mode Soft Pneumatic Actuator
Long Bai, Jiayang Chen, Jie Xiong, Xiaohong Chen, Jia Zheng, Yang Deng, Yuanxi Sun and Zhang ChenIEEE/ASME Transactions on Mechatronics 31 (2) 1775 (2026)
https://doi.org/10.1109/TMECH.2025.3613364
616 (2026)
https://doi.org/10.1007/978-981-95-3037-3_44
Machine learning driven optimisation of mechanical and microstructural behaviour in FFF-printed Onyx–HSHT composites
Bhagyashri Hiralal Dhage, Nitin K. Khedkar and Vijayshri KhedkarJournal of Materials Science: Materials in Engineering (2026)
https://doi.org/10.1186/s40712-026-00450-9
A review on the design and evaluation frameworks for thermo-responsive polyurethane four-dimensional printed polymer-textile composites (4DP PTC)
Tin Chun CheungProgress in Additive Manufacturing 11 (5) 4699 (2026)
https://doi.org/10.1007/s40964-026-01611-0
Effect of Printing Parameters on the Dynamic Characteristics of Additively Manufactured ABS Beams: An Experimental Modal Analysis and Response Surface Methodology
Hilal Doğanay Kati, Feiyang He, Muhammad Khan, Hakan Gökdağ and Yousef Lafi A. AlshammariPolymers 17 (12) 1615 (2025)
https://doi.org/10.3390/polym17121615
Planning Quality Control in the Implementation of 3D Printing Processes. A Case Study
Magdalena MazurManagement Systems in Production Engineering 33 (3) 443 (2025)
https://doi.org/10.2478/mspe-2025-0043
Predictive machine learning and printing parameter optimization for enhanced impact performance of 3D-printed Onyx-Kevlar composites
Bhagyashri Hiralal Dhage and Nitin K. KhedkarDiscover Materials 5 (1) (2025)
https://doi.org/10.1007/s43939-025-00307-6
396 (2025)
https://doi.org/10.1109/ICETA67772.2025.11280194
689 (2025)
https://doi.org/10.1109/ICETA67772.2025.11280047
Experimental and Numerical Study on of 3D Printed Carbon Fiber Composite Cylindrical Shell Under Axial Loading
Xiongjie Che, Ruihai Xin and Nam Seo GooInternational Journal of Aeronautical and Space Sciences 26 (5) 2309 (2025)
https://doi.org/10.1007/s42405-025-00925-7
1 (2024)
https://doi.org/10.1109/EEITE61750.2024.10654436
338 (2024)
https://doi.org/10.1109/ICETA63795.2024.10850796
Prediction of effective cohesive parameters for mode I failure behavior of LPBF Ti-6Al-4V/CFRTP interface using meso-scale modelling
Y. Nusom, S. Srimanosaowapak and V. UthaisangsukEngineering Fracture Mechanics 297 109897 (2024)
https://doi.org/10.1016/j.engfracmech.2024.109897
Geometrically tunable architected materials designed from prismatic rotating units
Andrea Sorrentino and Davide CastagnettiProceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 238 (9) 1690 (2024)
https://doi.org/10.1177/14644207241229995
Mechanical Characteristics of a Product Manufactured by the FDM Printing
L. I. Garipova, A. S. Batrakov and F. F. KhabibullinRussian Aeronautics 67 (1) 145 (2024)
https://doi.org/10.3103/S1068799824010173
Effect of 3D Printing Process Parameters on Damping Characteristic of Cantilever Beams Fabricated Using Material Extrusion
Feiyang He, Haoran Ning and Muhammad KhanPolymers 15 (2) 257 (2023)
https://doi.org/10.3390/polym15020257
Influence of Thermal Loads on the Microstructure and Mechanical Properties of Structural Steel
T. Domański, W. Piekarska, M. Sága, M. Kubiak, Z. Saternus and Z. SágováActa Physica Polonica A 144 (5) 300 (2023)
https://doi.org/10.12693/APhysPolA.144.300
The NuroSleeve, a user-centered 3D printed hybrid orthosis for individuals with upper extremity impairment
Mehdi Khantan, Mikael Avery, Phyo Thuta Aung, Rachel M. Zarin, Emma Hammelef, Nabila Shawki, Mijail Demian Serruya and Alessandro NapoliJournal of NeuroEngineering and Rehabilitation 20 (1) (2023)
https://doi.org/10.1186/s12984-023-01228-2
Accuracy evaluation of thin wall features fabricated by fused deposition modeling using reinforced composite materials
Siti Nur Humaira Mazlan, Aini Zuhra Abdul Kadir, Mohd Rizal Alkahari and Tan Ken LandProgress in Additive Manufacturing 8 (6) 1357 (2023)
https://doi.org/10.1007/s40964-023-00403-0
Quantifying the influence of reinforcement architecture on the planar mechanical properties of 3D-printed continuous fiber-reinforced thermoplastic composites
Andrés De la Fuente, Rodrigo Castillo, Angelo Oñate, et al.The International Journal of Advanced Manufacturing Technology 127 (3-4) 1575 (2023)
https://doi.org/10.1007/s00170-023-11569-w
Experimental Fatigue Studies of Additively Manufactured Fiber Reinforced Thermoplastic
M P Aldo Jason, V S Mudakappanavar, N V Sreekanth, Santhosh and DoreswamyJournal of Mines, Metals and Fuels 349 (2023)
https://doi.org/10.18311/jmmf/2022/32926
The Effect of Strain Rate on the Compression Behavior of Additively Manufactured Short Carbon Fiber-Reinforced Polyamide Composites with Different Layer Heights, Infill Patterns, and Built Angles
Mehmet Kaan Zeybek, Mustafa Güden and Alper TaşdemirciJournal of Materials Engineering and Performance 32 (24) 11050 (2023)
https://doi.org/10.1007/s11665-023-07918-1
Effects of 3D-printing surface morphologies on interfacial bonding strength between Ti–6Al–4V and CFRTP with PMCs interlayer
Y. Nusom, S. Srimanosaowapak and V. UthaisangsukInternational Journal of Adhesion and Adhesives 121 103313 (2023)
https://doi.org/10.1016/j.ijadhadh.2022.103313
Analysis of Symmetrical/Asymmetrical Loading Influence of the Full-Suspension Downhill Bicycle’s Frame on the Crack Failure Formation at a Critical Point during Different Driving Scenarios and Design Improvement
Vladimír Bulej, Ivan Kuric, Milan Sága, Milan Vaško, Zuzana Ságová, Michal Bartoš and Stanislaw LegutkoSymmetry 14 (2) 255 (2022)
https://doi.org/10.3390/sym14020255
Investigation into Thermomechanical Response of Polymer Composite Materials Produced through Additive Manufacturing Technologies
Raluca Maier, Anca Mihaela Istrate, Alexandra Despa, Andrei Cristian Mandoc, Sebastian Bucaciuc and Romică StoicaMaterials 15 (14) 5069 (2022)
https://doi.org/10.3390/ma15145069
Advanced Maritime Technologies and Applications
Ain Adlina Binti Kamaruzaman, Azman Ismail, Bakhtiar Ariff Baharuddin, et al.Advanced Structured Materials, Advanced Maritime Technologies and Applications 166 185 (2022)
https://doi.org/10.1007/978-3-030-89992-9_16
Numerical control system based on a programmable logic device
Grzegorz Śmigielski, M. Macko, I. Rojek, M. Saga and D. MikołajewskiMATEC Web of Conferences 357 01005 (2022)
https://doi.org/10.1051/matecconf/202235701005
A novel manufacturing route for integrated 3D-printed composites and cold-sprayed metallic layer
Antonio Viscusi, Roberta Della Gatta, Francesco Delloro, et al.Materials and Manufacturing Processes 37 (5) 568 (2022)
https://doi.org/10.1080/10426914.2021.1942908
Effect of process parameters on thermal and mechanical properties of polymer‐based composites using fused filament fabrication
Khaled Benfriha, Mohammad Ahmadifar, Mohammadali Shirinbayan and Abbas TcharkhtchiPolymer Composites 42 (11) 6025 (2021)
https://doi.org/10.1002/pc.26282
Creep and Recovery Behavior of Continuous Fiber-Reinforced 3DP Composites
Ans Al Rashid and Muammer KoҫPolymers 13 (10) 1644 (2021)
https://doi.org/10.3390/polym13101644
Mathematical Modeling and Optimization of Fused Filament Fabrication (FFF) Process Parameters for Shape Deviation Control of Polyamide 6 Using Taguchi Method
Zohreh Shakeri, Khaled Benfriha, Mohammadali Shirinbayan, Mohammad Ahmadifar and Abbas TcharkhtchiPolymers 13 (21) 3697 (2021)
https://doi.org/10.3390/polym13213697