EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues MATEC Web Conf., 239 (2018) 06007 Article references

Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

Technological and Chemical Drivers of Zinc Coating Degradation in DX51d+Z140 Cold-Formed Steel Sections

Volodymyr Kukhar, Andrii Kostryzhev, Oleksandr Dykha, Oleg Makovkin, Ihor Kuziev, Roman Vakulenko, Viktoriia Kulynych, Khrystyna Malii, Eleonora Butenko, Natalia Hrudkina, Oleksandr Shapoval, Sergiu Mazuru and Oleksandr Hrushko
Metals 16 (2) 146 (2026)
https://doi.org/10.3390/met16020146

Recent Advances in Biodegradable Magnesium Alloys for Medical Implants: Evolution, Innovations, and Clinical Translation

Mykyta Aikin, Vadim Shalomeev, Volodymyr Kukhar, Andrii Kostryzhev, Ihor Kuziev, Viktoriia Kulynych, Oleksandr Dykha, Volodymyr Dytyniuk, Oleksandr Shapoval, Alvydas Zagorskis, Vadym Burko, Olha Khliestova, Viacheslav Titov and Oleksandr Hrushko
Crystals 15 (8) 671 (2025)
https://doi.org/10.3390/cryst15080671

Development of an Abaqus UMAT Subroutine for Predicting Ductile Fracture in Deep Drawing Based on the Brozzo Model

Dinh Van Tran and Chu Van Truong
Premier Journal of Science (2025)
https://doi.org/10.70389/PJS.100181

Thin-walled aluminium waste remelting in circulation circuit with magnetodynamic pump

Oleksiy Smirnov, Vladyslav Fikssen, Volodymyr Kukhar, Maksym Goryuk, Oleksandr Hrushko, Oleksandr Rud and Viktor Lomakin
Journal of Materials Science 59 (40) 18935 (2024)
https://doi.org/10.1007/s10853-024-10062-3

Tube Sheet Ligament Thickness Selection and Stress Analysis during Tube Expansion

Oleksandr Shapoval, Roman Vakulenko, Viktoriia D. Kulynych and Iurii V. Savchenko
Key Engineering Materials 1004 85 (2024)
https://doi.org/10.4028/p-h2X9dI

DEVELOPING THE BEHAVIORAL PATTERN OF NON-RIGID INTERPIPE JUMPERS WITH COMPLEX CONFIGURATION AT A PIPE BOARD UNDER IMPULSE LOADING

Vibrations in engineering and technology (4(115)) 36 (2024)
https://doi.org/10.37128/2306-8744-2024-4-5

Microstructure and phase elemental distribution in high-boron multi-component cast irons

Yu. G. Chabak, K. Shimizu, V. G. Efremenko, et al.
International Journal of Minerals, Metallurgy and Materials 29 (1) 78 (2022)
https://doi.org/10.1007/s12613-020-2135-8

FEM simulation of bending and torsion tests of similar size RHS but of the different production options

Volodymyr Kukhar, Yurii Sahirov, Vadym Hornostai, et al.
E3S Web of Conferences 234 00079 (2021)
https://doi.org/10.1051/e3sconf/202123400079

FEM analysis of stress-strain state and material consumption of RHS with longitudinal gap and weld during the tests

V V Kukhar, Y G Sahirov, V M Hornostai, O E Markov and M M Nahnibeda
IOP Conference Series: Materials Science and Engineering 1037 (1) 012025 (2021)
https://doi.org/10.1088/1757-899X/1037/1/012025

International Scientific Conference Energy Management of Municipal Facilities and Sustainable Energy Technologies EMMFT 2019

Aleksandr Dykha, Viktor Artiukh, Ruslan Sorokatyi, Volodymyr Kukhar and Kirill Kulakov
Advances in Intelligent Systems and Computing, International Scientific Conference Energy Management of Municipal Facilities and Sustainable Energy Technologies EMMFT 2019 1259 542 (2021)
https://doi.org/10.1007/978-3-030-57453-6_52

Investigation of Lateral Surface Contour at Forging of Billets with Upsetting Ratio Above 2.5

O Anishchenko, V Kukhar and E Klimov
IOP Conference Series: Materials Science and Engineering 969 (1) 012076 (2020)
https://doi.org/10.1088/1757-899X/969/1/012076

International Scientific Conference Energy Management of Municipal Facilities and Sustainable Energy Technologies EMMFT 2018

Oleksandr Anishchenko, Volodymyr Kukhar, Viktor Artiukh, Anatoliy Trebukhin and Natalia Zotkina
Advances in Intelligent Systems and Computing, International Scientific Conference Energy Management of Municipal Facilities and Sustainable Energy Technologies EMMFT 2018 982 809 (2020)
https://doi.org/10.1007/978-3-030-19756-8_77

Improving of closed die-forging of transport and marine fasteners “wing nut”

V Kukhar, E Klimov, S Chernenko, et al.
IOP Conference Series: Materials Science and Engineering 918 (1) 012096 (2020)
https://doi.org/10.1088/1757-899X/918/1/012096

Simulation of bending and torsion tests of non-welded and welded direct-formed rectangular hollow sections

V Kukhar, Y Sahirov, V Hornostai, O Markov and M Nahnibeda
IOP Conference Series: Materials Science and Engineering 1001 012069 (2020)
https://doi.org/10.1088/1757-899X/1001/1/012069

Study of some aspects of refining process physics of large-sized details precision surfaces

Viktor Vodzianskiy, Viktor Artiukh, Sergey Kargin, et al.
E3S Web of Conferences 175 05049 (2020)
https://doi.org/10.1051/e3sconf/202017505049

Approximation of limit amplitude diagram for destructive elements of safety devices

Viktor Artiukh, Vladlen Mazur, Yurii Sahirov, et al.
E3S Web of Conferences 164 14009 (2020)
https://doi.org/10.1051/e3sconf/202016414009

International Scientific Conference Energy Management of Municipal Facilities and Sustainable Energy Technologies EMMFT 2018

Sergey Kargin, Viktor Artiukh, Vladlen Mazur, Dmitriy Silka and Natalia Meller
Advances in Intelligent Systems and Computing, International Scientific Conference Energy Management of Municipal Facilities and Sustainable Energy Technologies EMMFT 2018 982 818 (2020)
https://doi.org/10.1007/978-3-030-19756-8_78

Spring-back effect during multi-pass bending of sheet blanks

Volodymyr Kukhar, Mykyta Nahnibeda, Oleksii Radushev, D. Rudoy and V. Murgul
E3S Web of Conferences 135 01066 (2019)
https://doi.org/10.1051/e3sconf/201913501066