Superplastic forming of shells from sheet blanks with thermally unstable coatings
MATEC Web Conf., 239 (2018) 06006
Published online: 2018-11-27
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Evaluating Plasticity of Alloy AD31 on Ingot Height
Yevgen Smyrnov, Vitalii Skliar and Doston ParpievSolid State Phenomena 316 461 (2021)
https://doi.org/10.4028/www.scientific.net/SSP.316.461
Analysis of Galvanized Steel Sheets Fabrication in Cold Rolling Shop and Identification of Local Impacts Contributing to Corrosion of Metal-Products
Volodymyr V. Kukhar, Eduard S. Klimov and Serhii M. ChernenkoSolid State Phenomena 316 873 (2021)
https://doi.org/10.4028/www.scientific.net/SSP.316.873
International Scientific Conference Energy Management of Municipal Facilities and Sustainable Energy Technologies EMMFT 2019
Aleksandr Dykha, Viktor Artiukh, Ruslan Sorokatyi, Volodymyr Kukhar and Kirill KulakovAdvances in Intelligent Systems and Computing, International Scientific Conference Energy Management of Municipal Facilities and Sustainable Energy Technologies EMMFT 2019 1259 542 (2021)
https://doi.org/10.1007/978-3-030-57453-6_52
Finite-Element Simulation of Steckel Mill Rolling
Oleksandr H. Kurpe, Volodymyr V. Kukhar and Eduard S. KlimovKey Engineering Materials 887 564 (2021)
https://doi.org/10.4028/www.scientific.net/KEM.887.564
Determination Coefficient of Stress Concentration Using a Conformed Display on a Circle of a Single Radius
Oleksandr Shapoval, Iurii Savchenko and Oleg MarkovSolid State Phenomena 316 928 (2021)
https://doi.org/10.4028/www.scientific.net/SSP.316.928
12 (2021)
https://doi.org/10.1007/978-3-030-77719-7_2
1 (2020)
https://doi.org/10.1109/PAEP49887.2020.9240865
Quenching and Partitioning–Based Heat Treatment for Rolled Grinding Steel Balls
V. I. Zurnadzhy, V. G. Efremenko, K. M. Wu, et al.Metallurgical and Materials Transactions A 51 (6) 3042 (2020)
https://doi.org/10.1007/s11661-020-05737-w
117 (2020)
https://doi.org/10.1109/TCSET49122.2020.235405
Tailoring strength/ductility combination in 2.5 wt% Si-alloyed middle carbon steel produced by the two-step Q-P treatment with a prolonged partitioning stage
V.I. Zurnadzhy, V.G. Efremenko, K.M. Wu, et al.Materials Science and Engineering: A 791 139721 (2020)
https://doi.org/10.1016/j.msea.2020.139721
1 (2020)
https://doi.org/10.1109/PAEP49887.2020.9240818
Pulsed plasma surface modification of grey cast iron
Yu. G. Chabak, T. V. Pastukhova, V. G. Efremenko, et al.Journal of Physical Studies 24 (2) (2020)
https://doi.org/10.30970/jps.24.2501
1 (2020)
https://doi.org/10.1109/PAEP49887.2020.9240873
1 (2020)
https://doi.org/10.1109/PAEP49887.2020.9240830
1 (2020)
https://doi.org/10.1109/PAEP49887.2020.9240822
International Scientific Conference Energy Management of Municipal Facilities and Sustainable Energy Technologies EMMFT 2018
Oleksandr Anishchenko, Volodymyr Kukhar, Viktor Artiukh, Anatoliy Trebukhin and Natalia ZotkinaAdvances in Intelligent Systems and Computing, International Scientific Conference Energy Management of Municipal Facilities and Sustainable Energy Technologies EMMFT 2018 982 809 (2020)
https://doi.org/10.1007/978-3-030-19756-8_77
Contact-deformation mechanism of boundary friction
Alexandr Dykha, Volodymyr Kukhar, Viktor Artiukh, et al.E3S Web of Conferences 164 14004 (2020)
https://doi.org/10.1051/e3sconf/202016414004
International Scientific Conference Energy Management of Municipal Facilities and Sustainable Energy Technologies EMMFT 2018
Sergey Kargin, Viktor Artiukh, Vladlen Mazur, Dmitriy Silka and Natalia MellerAdvances in Intelligent Systems and Computing, International Scientific Conference Energy Management of Municipal Facilities and Sustainable Energy Technologies EMMFT 2018 982 818 (2020)
https://doi.org/10.1007/978-3-030-19756-8_78
Profitability of Production of Stainless Steel + Zirconium Metals Combination Adapters
Oleksandr Shapoval, Volodymyr V. Drahobetskyi, Iurii Savchenko, Anna Gurenko and Oleg MarkovKey Engineering Materials 864 285 (2020)
https://doi.org/10.4028/www.scientific.net/KEM.864.285
Modeling and testing of three-point bending of rectangular hollow sections for vehicles and highway guardrails
V Kukhar, Y Sahirov, E Klimov, I Marchenko and M NahnibedaIOP Conference Series: Materials Science and Engineering 918 (1) 012095 (2020)
https://doi.org/10.1088/1757-899X/918/1/012095
Kinetics of structure transformation in pulsed plasma high-Cr coatings under post-heat treatment
Functional Materials 27 (1) (2020)https://doi.org/10.15407/fm27.01.117
Investigation of Lateral Surface Contour at Forging of Billets with Upsetting Ratio Above 2.5
O Anishchenko, V Kukhar and E KlimovIOP Conference Series: Materials Science and Engineering 969 (1) 012076 (2020)
https://doi.org/10.1088/1757-899X/969/1/012076
Improving of closed die-forging of transport and marine fasteners “wing nut”
V Kukhar, E Klimov, S Chernenko, et al.IOP Conference Series: Materials Science and Engineering 918 (1) 012096 (2020)
https://doi.org/10.1088/1757-899X/918/1/012096
194 (2019)
https://doi.org/10.1109/MEES.2019.8896468
46 (2019)
https://doi.org/10.1109/MEES.2019.8896465
506 (2019)
https://doi.org/10.1109/MEES.2019.8896532
Spring-back effect during multi-pass bending of sheet blanks
Volodymyr Kukhar, Mykyta Nahnibeda, Oleksii Radushev, D. Rudoy and V. MurgulE3S Web of Conferences 135 01066 (2019)
https://doi.org/10.1051/e3sconf/201913501066