EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues MATEC Web Conf., 224 (2018) 02039 Article references

Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

The study of parametric optimization algorithms on example of vehicle bumper crashworthiness

R Goncharov and V Zuzov
IOP Conference Series: Materials Science and Engineering 820 (1) 012030 (2020)
https://doi.org/10.1088/1757-899X/820/1/012030

Prediction of fatigue life of suspension parts of the semi-trailer in the early stages of design

D Vdovin, Y Levenkov and I Chichekin
IOP Conference Series: Materials Science and Engineering 820 (1) 012002 (2020)
https://doi.org/10.1088/1757-899X/820/1/012002

Application of optimization methods to reduce the mass of body parts of minibuses made of layered composite materials

A Kostenko and V Zuzov
IOP Conference Series: Materials Science and Engineering 963 (1) 012018 (2020)
https://doi.org/10.1088/1757-899X/963/1/012018

Investigation of the influence of the dynamic system parameters on its frequency and modal spectrums

M Lahtyukhov and A Fominykh
IOP Conference Series: Materials Science and Engineering 820 (1) 012029 (2020)
https://doi.org/10.1088/1757-899X/820/1/012029

The stress-strain state and optimization of the cross section of the wheel rim tubeless truck tire

I Balabin, M Lyamin, I Chabunin and V Ryazantsev
IOP Conference Series: Materials Science and Engineering 820 (1) 012014 (2020)
https://doi.org/10.1088/1757-899X/820/1/012014

Crashworthiness design of truck’s cabin using topological and parametric optimization

R Goncharov and V Zuzov
IOP Conference Series: Materials Science and Engineering 820 (1) 012033 (2020)
https://doi.org/10.1088/1757-899X/820/1/012033

A multi-body dynamic model of the snowmobile to define acting loads in the its parts

D Vdovin, Y Levenkov, I Chichekin and A Fominykh
IOP Conference Series: Materials Science and Engineering 963 (1) 012011 (2020)
https://doi.org/10.1088/1757-899X/963/1/012011

Calculated evaluation of the efficiency of dynamic vibration isolators of the tractor cab suspension system

V Shekhovtsov, M Lyashenk, N Sokolov-Dobrev, A Diakov and K Evseev
IOP Conference Series: Materials Science and Engineering 820 (1) 012039 (2020)
https://doi.org/10.1088/1757-899X/820/1/012039

Calculated and experimental tests of dynamic vibration isolators for use in the suspension system of the traction vehicle cabin

V Shekhovtsov, M Lyashenko, P Potapov, A Diakov and K Evseev
IOP Conference Series: Materials Science and Engineering 820 (1) 012022 (2020)
https://doi.org/10.1088/1757-899X/820/1/012022

Formation of the law of steering angle control to maintain a trajectory of the vehicle movement

Y Levenkov, I Chichekin and N Vol’skaya
IOP Conference Series: Materials Science and Engineering 820 (1) 012038 (2020)
https://doi.org/10.1088/1757-899X/820/1/012038

Automatization of calculation of dynamic characteristics of the car suspension system

M Lahtyukhov and L Zheglov
IOP Conference Series: Materials Science and Engineering 820 (1) 012031 (2020)
https://doi.org/10.1088/1757-899X/820/1/012031

Quasi-static bending of thin-walled beams with different fillers under extreme load for solving the problems of crashworthiness

R Goncharov and V Zuzov
IOP Conference Series: Materials Science and Engineering 963 (1) 012007 (2020)
https://doi.org/10.1088/1757-899X/963/1/012007