Article references

Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

Improving the accuracy of machining of non-rigid shaft

Oleg Drachev, Alexander Bobrowskii, Alexey Zotov

MATEC Web Conf., 224 (2018) 01085

Published online: 2018-10-30

DOI: https://doi.org/10.1051/matecconf/201822401085

This article has been cited by the following article(s):

Nikolay V. Lazovskiy, Oleg A. Kundyukov and Kirill K. Ershov
424 (2024)
https://doi.org/10.1109/ElCon61730.2024.10468170

Evaluation of the Roughness of the Machined Surface during Pendulum Surface Plastic Deformation

S. A. Zaides and Q. H. Minh
Russian Engineering Research 44 (3) 332 (2024)
https://doi.org/10.3103/S1068798X24700291

Determining the Temperature in the Contact Zone during Pendulum Surface Plastic Deformation of Structural Steel

S. A. Zaides and M. H. Ho
Russian Metallurgy (Metally) 2023 (13) 2210 (2023)
https://doi.org/10.1134/S0036029523700283

Evaluation of the Effect of Thermal Fields on the Strain Stress State of Parts in the Case of Pendulum Surface Plastic Deformation

S. A. Zaides and Kho Min Kuan
Steel in Translation 52 (9) 885 (2022)
https://doi.org/10.3103/S0967091222090145

Improvement of Calibrated Steel Quality by Surface Deformation. Part 2: Effect of the Enveloping Surface Deformation on the Residual Stresses in Cylindrical Rods

S. A. Zaides, Pham Van Anh and L. G. Klimova
Steel in Translation 51 (5) 296 (2021)
https://doi.org/10.3103/S0967091221050132

Quality improvement of calibrated steelby surface deformation. Part 2. Effect of enveloping surface deformation on residual stresses in cylindrical bars

S. A. Zaides, Van Anh Pham and L. G. Klimova
Izvestiya. Ferrous Metallurgy 64 (5) 330 (2021)
https://doi.org/10.17073/0368-0797-2021-5-330-336

Modeling the Deformation of Non-Rigid Shafts during Turning on CNC Machines

Nikita P. Matseyn and Nikolay V. Nosov
Materials Science Forum 1037 309 (2021)
https://doi.org/10.4028/www.scientific.net/MSF.1037.309

The study of the dynamics of the cutting process of longitudinal turning of non-rigid shafts

Sergey Vasilevykh, Alexander Udalov and Evgeny Shelikhov
Materials Today: Proceedings 19 2323 (2019)
https://doi.org/10.1016/j.matpr.2019.07.680