Article references

Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

An approach of developing low cost ARM based CNC systems by controlling CAN drives

Georgi M. Martinov, Akram Al Khoury, Ahed Issa

MATEC Web Conf., 224 (2018) 01020

Published online: 2018-10-30

DOI: https://doi.org/10.1051/matecconf/201822401020

This article has been cited by the following article(s):

An approach to using a CNC machine digital shadow and cloud-based technologies at the machine shop floor level

Georgi M. Martinov, Sergey V. Sokolov and Liliya I. Martinova
The International Journal of Advanced Manufacturing Technology 129 (5-6) 2415 (2023)
https://doi.org/10.1007/s00170-023-12437-3

Georgi Martinov and Alexander Zakharov
702 (2023)
https://doi.org/10.1109/ICIEAM57311.2023.10139086

Georgi Martinov, Akram Al Khoury and Ahed Issa
346 (2023)
https://doi.org/10.1109/SmartIndustryCon57312.2023.10110757

Design and Control of a Three-Axis Motion Servo Control System Based on a CAN Bus

Ming-Yen Wei
Energies 16 (10) 4208 (2023)
https://doi.org/10.3390/en16104208

Product Lifecycle Management. Green and Blue Technologies to Support Smart and Sustainable Organizations

Ruben Dario Solarte Bolaños, Antonio Carlos Valdiero, Luiz Antônio Rasia and João Carlos Espindola Ferreira
IFIP Advances in Information and Communication Technology, Product Lifecycle Management. Green and Blue Technologies to Support Smart and Sustainable Organizations 640 25 (2022)
https://doi.org/10.1007/978-3-030-94399-8_3

Petr Nikishechkin, Artem Akimov and Anatoly Nikich
2557 050087 (2022)
https://doi.org/10.1063/5.0101237

Advances in Automation III

R. Nezmetdinov, P. Melikov and R. Utarbaev
Lecture Notes in Electrical Engineering, Advances in Automation III 857 92 (2022)
https://doi.org/10.1007/978-3-030-94202-1_9

Creation of CNC system’s components for monitoring machine tool health

Liliya I. Martinova, Nikolay V. Kozak, Ilya A. Kovalev and Aleksandr B. Ljubimov
The International Journal of Advanced Manufacturing Technology 117 (7-8) 2341 (2021)
https://doi.org/10.1007/s00170-021-07107-1

Research and Development of Food Industry’s Three-Dimensional Printing

Ramil Nezhmetdinov, Ilya Kovalev, Pavel Melikov, et al.
MATEC Web of Conferences 346 03071 (2021)
https://doi.org/10.1051/matecconf/202134603071

Abhay Sharma, Shruti Airan and Dhaval Shah
731 (2021)
https://doi.org/10.1109/ICESC51422.2021.9532619

I. A. Kovalev, R.A. Nezhmetdinov and A.N. Petrov
1 (2020)
https://doi.org/10.1109/FarEastCon50210.2020.9271449

I.A. Kovalev, R.A. Nezhmetdinov and P.A. Nikishechkin
1 (2019)
https://doi.org/10.1109/FarEastCon.2019.8933999