The principles of the milling equipment improvement
MATEC Web Conf., 224 (2018) 01019
Published online: 2018-10-30
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Features of material movement in a vertical chamber of a vibratory jaw crusher when producing a fine-grained product
Geo-Technical Mechanics (164) 71 (2023)https://doi.org/10.15407/geotm2023.164.071
2557 050049 (2022)
https://doi.org/10.1063/5.0100861
Magnetohydrodynamic Simulation in the Progress of Electromagnetic Stirrers Designing. Part 2. Simulation of Magnetohydrodynamic Processes
S. I. Shakhov, Z. K. Kabakov, S. M. Gorbatyuk, et al.Metallurgist 66 (5-6) 639 (2022)
https://doi.org/10.1007/s11015-022-01370-7
2557 050048 (2022)
https://doi.org/10.1063/5.0100597
Proceedings of the 6th International Conference on Industrial Engineering (ICIE 2020)
A. D. Bardovsky, A. A. Gerasimova and I. I. BasyrovLecture Notes in Mechanical Engineering, Proceedings of the 6th International Conference on Industrial Engineering (ICIE 2020) 615 (2021)
https://doi.org/10.1007/978-3-030-54814-8_71
Proceedings of the 6th International Conference on Industrial Engineering (ICIE 2020)
A. A. Fomin, R. G. Safin and N. M. TerekhinLecture Notes in Mechanical Engineering, Proceedings of the 6th International Conference on Industrial Engineering (ICIE 2020) 1080 (2021)
https://doi.org/10.1007/978-3-030-54817-9_126
Proceedings of the 6th International Conference on Industrial Engineering (ICIE 2020)
A. A. Fomin, R. V. Yudin and D. G. RiabushkinLecture Notes in Mechanical Engineering, Proceedings of the 6th International Conference on Industrial Engineering (ICIE 2020) 1088 (2021)
https://doi.org/10.1007/978-3-030-54817-9_127
Research and development of broaching methods on mandrel of large-sized pipe forgings
O A Kobelev, S V Albul and N L KirillovaIOP Conference Series: Materials Science and Engineering 709 (4) 044104 (2020)
https://doi.org/10.1088/1757-899X/709/4/044104
Proceedings of the 5th International Conference on Industrial Engineering (ICIE 2019)
A. A. Fomin, V. G. Gusev and N. F. TimerbaevLecture Notes in Mechanical Engineering, Proceedings of the 5th International Conference on Industrial Engineering (ICIE 2019) 865 (2020)
https://doi.org/10.1007/978-3-030-22063-1_92
Proceedings of the 5th International Conference on Industrial Engineering (ICIE 2019)
A. M. BusyginLecture Notes in Mechanical Engineering, Proceedings of the 5th International Conference on Industrial Engineering (ICIE 2019) 231 (2020)
https://doi.org/10.1007/978-3-030-22041-9_27
Proceedings of the 5th International Conference on Industrial Engineering (ICIE 2019)
R. V. Yudin, D. A. Parinov and I. N. MedvedevLecture Notes in Mechanical Engineering, Proceedings of the 5th International Conference on Industrial Engineering (ICIE 2019) 1251 (2020)
https://doi.org/10.1007/978-3-030-22041-9_130
Proceedings of the 5th International Conference on Industrial Engineering (ICIE 2019)
A. A. Fomin, R. V. Yudin and A. R. SadrtdinovLecture Notes in Mechanical Engineering, Proceedings of the 5th International Conference on Industrial Engineering (ICIE 2019) 1455 (2020)
https://doi.org/10.1007/978-3-030-22063-1_153
The Processing of the Profile Surface of the Work-Pieces, Characterized by Low Rigidity
Anatoly A. Fomin, Vladimir G. Gusev and Nail F. TimerbaevSolid State Phenomena 299 852 (2020)
https://doi.org/10.4028/www.scientific.net/SSP.299.852
Revisiting the adjustable mode of a locomotive startup to ensure the best use of the clutch
A M Keropyan, Yu Ye Babichev and P Ye SizinIOP Conference Series: Materials Science and Engineering 709 (2) 022052 (2020)
https://doi.org/10.1088/1757-899X/709/2/022052
Constructive solutions for upgrading of the drive of processing equipment
A D Bardovsky, A A Gerasimova and I I BasyrovIOP Conference Series: Materials Science and Engineering 709 022015 (2020)
https://doi.org/10.1088/1757-899X/709/2/022015
EFFECT OF A CERAMIC INSERT WITH SWIRLER ON GAS DYNAMICS AND HEAT EXCHANGE IN A BLAST FURNACE TUYERE
S. M. Gorbatyuk, Yu. S. Tarasov, I. A. Levitskii, A. G. Radyuk and A. E. TitlyanovIzvestiya. Ferrous Metallurgy 62 (5) 337 (2019)
https://doi.org/10.17073/0368-0797-2019-5-337-344
DESIGN IMPROVEMENT AND OPERATION MODELING OF EAF GAS EXHAUST SYSTEM OF A FOUNDRY SHOP
S. P. Eron’ko, S. M. Gorbatyuk, M. Yu. Tkachev and E. V. OshovskayaIzvestiya. Ferrous Metallurgy 62 (1) 34 (2019)
https://doi.org/10.17073/0368-0797-2019-1-34-41
Improvements to Mixing of Natural Gas and Hot-Air Blast in the Air Tuyeres of Blast Furnaces with Thermal Insulation of the Blast Duct
A. G. Radyuk, S. M. Gorbatyuk, Yu. S. Tarasov, A. E. Titlyanov and A. V. AleksakhinMetallurgist 63 (5-6) 433 (2019)
https://doi.org/10.1007/s11015-019-00843-6
Physics’ identification of formation process of wood polymer heat insulation material
V A Saldaev, V G Gusev and A R KoryakinIOP Conference Series: Materials Science and Engineering 687 (2) 022007 (2019)
https://doi.org/10.1088/1757-899X/687/2/022007
Improving the Gas-Exhaust System at Foundry Electrofurnaces
S. P. Eron’ko, S. M. Gorbatyuk, M. Yu. Tkachev and E. V. OshovskayaSteel in Translation 49 (1) 7 (2019)
https://doi.org/10.3103/S0967091219010066
Computer Simulation of the Cooling System for Rollers of the Finishing Stand of a Wide-Strip Hot-Rolling Mill and the Development of a New Scheme of Cooling
S. M. Gorbatyuk, S. P. Romanov and I. G. MorozovaMetallurgist 63 (7-8) 836 (2019)
https://doi.org/10.1007/s11015-019-00897-6