Investigation of laser heat treated Monel 400
MATEC Web Conf., 219 (2018) 02005
Published online: 2018-10-29
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
A predictive model of micro-cutting forces and thermal behavior in 7075 aluminum alloy considering maximum feed per revolution
Ping Zhang, zhencui Wang, Songting Zhang, Xiaomin Jiang and Xiujie YueJournal of the Brazilian Society of Mechanical Sciences and Engineering 48 (1) (2026)
https://doi.org/10.1007/s40430-025-05999-8
Surface activation of Monel 400 alloy as novel electrode for hydrogen production: Insights on electrocatalysis and electroactive surface area
Jhonys Machado Freitas, Ricardo Sgarbi and Luís A.M. RuotoloInternational Journal of Hydrogen Energy 199 152817 (2026)
https://doi.org/10.1016/j.ijhydene.2025.152817
Improvement of Wear Resistance and Mechanical Properties of Cu–Ni Alloy by Low Temperature Aluminizing
Azmi Erdogan, Tuba Yener and Kadir Mert DolekerMetallurgical and Materials Transactions A 56 (7) 2627 (2025)
https://doi.org/10.1007/s11661-025-07806-4
Study on the Micro-cutting Mechanism of 7075 Aluminum Alloy with Pre-fabricated Surface Microtextures
Ping Zhang, Songting Zhang, Yajie Sun, Jinlong Zhang and Xiujie YueJournal of Materials Engineering and Performance 34 (7) 5901 (2025)
https://doi.org/10.1007/s11665-024-09594-1
Investigation on the micro-cutting mechanism of aluminum matrix composites with ultrasound elliptical vibration
Ping Zhang, Shunxiang Wang, Songting Zhang and Xiujie YueThe International Journal of Advanced Manufacturing Technology 133 (7-8) 3727 (2024)
https://doi.org/10.1007/s00170-024-13924-x
Research on micro-cutting mechanism of CoCrFeNiAlX high-entropy alloy fiber–reinforced aluminum matrix composites
Ping Zhang, Shunxiang Wang, Xiujie Yue, Zhenyong Lin, Yeran Gao and Songting ZhangThe International Journal of Advanced Manufacturing Technology 130 (3-4) 1779 (2024)
https://doi.org/10.1007/s00170-023-12816-w
The Effect of Cutting Parameters on Surface Quality and Corrosion Resistance of Micro-machined Surfaces of 7075 Aluminum Alloy
Ping Zhang, Junling Liu, Zhenyong Lin, Shunxiang Wang, Jiang Yu and Qingqun MaiJournal of Materials Engineering and Performance 33 (18) 9421 (2024)
https://doi.org/10.1007/s11665-023-08639-1
The mechanism on surface integrity and fatigue performance of double‐sided micro‐cutting enhanced FeCoCrNiAl0.6 high entropy alloy
Ping Zhang, Zhenyong Lin, Yeran Gao, Songting Zhang, Xiujie Yue and Shunxiang WangFatigue & Fracture of Engineering Materials & Structures 47 (7) 2570 (2024)
https://doi.org/10.1111/ffe.14317
Investigation on micro-cutting and chip formation mechanism of CoCrFeNiAlX series high-entropy alloy
Ping Zhang, Shunxiang Wang, Zhenyong Lin, Xiujie Yue, Hanping Zhou and Songting ZhangJournal of the Brazilian Society of Mechanical Sciences and Engineering 46 (3) (2024)
https://doi.org/10.1007/s40430-024-04705-4
Analysis of processing efficiency, surface, and bulk chemistry, and nanomechanical properties of the Monel® alloy 400 after ultrashort pulsed laser ablation
Kipkurui Ronoh, Jan Novotný, Libor Mrňa, Alexandr Knápek and Dinara SobolaMaterials Research Express 11 (1) 016514 (2024)
https://doi.org/10.1088/2053-1591/ad184b
Influence of oblique cutting on the micro-cutting mechanism of FeCoCrNiAl0.6 high-entropy alloy
Zhang Ping, Lin Zhenyong, Sun Yajie, Zhou Hanping, Yue Xiujie and Zhang SongtingJournal of the Brazilian Society of Mechanical Sciences and Engineering 46 (10) (2024)
https://doi.org/10.1007/s40430-024-05199-w
Effects of laser and scanning parameters on surface modification of MONEL® alloy 400 by picosecond laser
Kipkurui Ronoh, Jan Novotný, Libor Mrňa, Alexandr Knápek and Dinara SobolaOptics & Laser Technology 172 110514 (2024)
https://doi.org/10.1016/j.optlastec.2023.110514
Machining mechanism of CoCrFeNiAlX high entropy alloys via ultrasonic elliptical vibration cutting
Ping Zhang, Shunxiang Wang, Yajie Sun, Jinlong Zhang, Xiujie Yue and Yeran GaoModelling and Simulation in Materials Science and Engineering 32 (8) 085010 (2024)
https://doi.org/10.1088/1361-651X/ad6c6c
Mechanical and surface characteristics in laser-assisted machining of NiFeCr alloy: An atomic-scale understanding
Dinh-Quan Doan, Thi-Bao-Tien Tran, Duc-Luan Nguyen and Van-Ha NguyenOptics & Laser Technology 179 111297 (2024)
https://doi.org/10.1016/j.optlastec.2024.111297
Microstructure and oxidation of a Ni–Al based intermetallic coating formation on a Monel-400 alloy
Tuba Yener, Alperen Refik Bilal Özsarı, Kadir Mert Döleker, Azmi Erdoğan and Suayb Çağri YenerMaterials Testing 66 (8) 1138 (2024)
https://doi.org/10.1515/mt-2024-0038
The mechanism of the effect of dual-sided waterjet peening on the surface integrity and fatigue performance of 12 mm thick Inconel 718
Ping Zhang, Yeran Gao, Songting Zhang, Xiujie Yue, Shunxiang Wang and Zhenyong LinInternational Journal of Fatigue 178 108011 (2024)
https://doi.org/10.1016/j.ijfatigue.2023.108011
Investigation on the microstructure evolution and nanocutting mechanism of single-crystal copper under different crystal orientations
Zhang Ping, Zhang Songting, Lin Zhenyong, Wang Shunxiang, Yue Xiujie, Gao Yeran and Youqiang WangThe International Journal of Advanced Manufacturing Technology 129 (1-2) 815 (2023)
https://doi.org/10.1007/s00170-023-12303-2
Analysis of performance characteristics with artificial intelligence based TLBO technique for laser drilling of Monel superalloy
D. Pramanik, T. Singh, N. Roy, R. Biswas, A.S Kuar, S. Sarkar and S. MitraOptics & Laser Technology 164 109554 (2023)
https://doi.org/10.1016/j.optlastec.2023.109554
Analysis of the machinability of different types of sintered carbides with WEDM in both water and oil baths
Katerina Mouralova, Libor Benes, Tomas Prokes, et al.The International Journal of Advanced Manufacturing Technology 125 (5-6) 2705 (2023)
https://doi.org/10.1007/s00170-023-10913-4
Investigation on the micromachining mechanism of FeCoCrNiAl0.6 high-entropy alloy
Ping Zhang, Zhenyong Lin, Shunxiang Wang, Xiujie Yue, Yeran Gao and Songting ZhangThe International Journal of Advanced Manufacturing Technology 127 (9-10) 4803 (2023)
https://doi.org/10.1007/s00170-023-11820-4
LOW TEMPERATURE ALUMINIZATION EFFECT ON MONEL 400 ALLOY PRODUCED BY PACK CEMENTATION METHOD
Alperen Refik Bilal ÖZSARI, Feyza SELAMET and Tuba YENERMugla Journal of Science and Technology 9 (2) 89 (2023)
https://doi.org/10.22531/muglajsci.1310224
Investigation of residual stress formation mechanism with water jet strengthening of CoCrFeNiAlx high-entropy alloy
Ping Zhang, Yeran Gao, Songting Zhang, Xiujie Yue, Shunxiang Wang and Zhenyong LinVacuum 217 112446 (2023)
https://doi.org/10.1016/j.vacuum.2023.112446
Effect of T6I4 and T616 on the machinability of 7075 aluminum alloy and tool wear mechanism
Ping Zhang, Yeran Gao, Shunxiang Wang, Zehua Liu, Zhenyong Lin, Songting Zhang and Xiujie YueThe International Journal of Advanced Manufacturing Technology 127 (9-10) 4453 (2023)
https://doi.org/10.1007/s00170-023-11733-2
Investigation of surface integrity in laser-assisted turning of AISI 4340 hardened steel: Finite element simulation with experimental verification
Farzad Ahmadi Khatir, Mohammad Hossein Sadeghi and Samet AkarOptics & Laser Technology 147 107623 (2022)
https://doi.org/10.1016/j.optlastec.2021.107623
Feasibility analysis and process characteristics of selective laser ablation assisted milling Inconel 718
Bao-Yu Zhang, Yu-Ning Zeng, Xue-Qin Pang, et al.Advances in Manufacturing 10 (4) 495 (2022)
https://doi.org/10.1007/s40436-021-00384-9
A review on applications of artificial intelligence in modeling and optimization of laser beam machining
Ali Naderi Bakhtiyari, Zhiwen Wang, Liyong Wang and Hongyu ZhengOptics & Laser Technology 135 106721 (2021)
https://doi.org/10.1016/j.optlastec.2020.106721
A study on the process efficiency of laser-assisted machining investigating energy consumption
Won-Jung Oh and Choon-Man LeeThe International Journal of Advanced Manufacturing Technology 113 (3-4) 867 (2021)
https://doi.org/10.1007/s00170-021-06651-0
Laser Alloying Monel 400 with Amorphous Boron to Obtain Hard Coatings
Mateusz Kuklinski, Aneta Bartkowska and Damian PrzestackiMaterials 12 (21) 3494 (2019)
https://doi.org/10.3390/ma12213494