Tensile properties of PLA/PBAT blends and PLA fibre-reinforced PBAT composite
MATEC Web Conf., 192 (2018) 03014
Published online: 2018-08-14
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Performance Enhancement of PLA Hybrid Biocomposites Using Flax Fiber and Agricultural Waste Biofillers: A Comparative Study with Jute-Based Systems Supported by Fuzzy CRITIC–COPRAS Analysis
Karthik Karunanidhi, Mohanraj Manoharan, Gokulkumar Sivanantham and Ravikumar Sadayan MottaiyanPolymers 18 (4) 439 (2026)
https://doi.org/10.3390/polym18040439
The toughened and heat-resistant composites for additive manufacturing applications. The use of poly(lactic acid)/poly(butylene succinate) blends modified with natural fillers
Jacek Andrzejewski, Magdalena Zdanowicz, Adam Piasecki, Patryk Mietliński and Mateusz BarczewskiInternational Journal of Lightweight Materials and Manufacture (2026)
https://doi.org/10.1016/j.ijlmm.2026.01.004
Development of Toughened Poly (lactic acid) by Melt Blending with Poly (butylene adipate-co-terephthalate) Using Epoxidized Castor Oil as a Compatibilizer for Biomedical Applications
K. P. Ajeya, Y. P. Naveen, K. T. Vishnu, G. S. Kariyappa Gowda, S. M. Anush, K. Amita and K. PrashanthaBiomedical Materials & Devices 4 (1) 672 (2026)
https://doi.org/10.1007/s44174-025-00308-2
Toward Advanced Degradable Soft Robotics Incorporating Transient Soft Electronics: Materials, Fabrication, and Applications
Kyung‐Sub Kim, Yong‐Joong Shin, Woo‐Jin Lee and Seung‐Kyun KangAdvanced Electronic Materials 12 (1) (2026)
https://doi.org/10.1002/aelm.202500400
Comparison of the Properties of Compostable and Conventional LDPE Films
Katarzyna Krupińska and Małgorzata KorzeniowskaSustainability 17 (17) 7867 (2025)
https://doi.org/10.3390/su17177867
Evaluation of the mechanical, thermal, and microstructural behaviour of gum Arabic reinforced polylactide (PLA) composite
Victoria Dumebi Obasa, Oludolapo Akanni Olanrewaju, Isaiah Oluwaseun Owoyemi and Samson Oluropo AdeosunJournal of Materials Science: Composites 6 (1) (2025)
https://doi.org/10.1186/s42252-025-00079-5
Mechanical and Structural Consequences of PLA/PBAT Contamination in Polypropylene and Polystyrene Recycling
Przemysław Postawa, Tomasz Stachowiak, Krystyna Malińska, Danuta Dróżdż, Tomasz Jaruga and Arkadiusz KlozińskiMaterials 18 (24) 5523 (2025)
https://doi.org/10.3390/ma18245523
Impact of the functionalized clay on the poly(lactic acid)/polybutylene adipate terephthalate (PLA/PBAT) based biodegradable nanocomposites: Thermal and rheological properties
Mariia Kostenko, Yurij Stetsyshyn, Khrystyna Harhay, Yuriy Melnyk, Volodymyr Donchak, Semen Khomyak, Oleksandr Ivanukh and Milan KracalikApplied Clay Science 278 108020 (2025)
https://doi.org/10.1016/j.clay.2025.108020
Soil constituents mediate the effects of microplastics from biodegradable mulch on soil biogeochemical properties
Casandra Leach, Ekta Tiwari and Seeta SistlaApplied Soil Ecology 215 106461 (2025)
https://doi.org/10.1016/j.apsoil.2025.106461
4D Printing of Multifunctional and Biodegradable PLA‐PBAT‐Fe3O4 Nanocomposites with Supreme Mechanical and Shape Memory Properties
Mohammad Amin Yousefi, Davood Rahmatabadi, Majid Baniassadi, Mahdi Bodaghi and Mostafa BaghaniMacromolecular Rapid Communications 46 (2) (2025)
https://doi.org/10.1002/marc.202400661
Ternary Blends of PLA with ATEC and TMC-200 as Medical-Grade Biodegradable Monofilaments for FDM 3D-Printing Applications
Manasanan Namhongsa, Tanyaluck Mekpothi, Kittisak Yarungsee, Donraporn Daranarong, Gareth M. Ross, Sukunya Ross and Winita PunyodomPolymers 17 (21) 2926 (2025)
https://doi.org/10.3390/polym17212926
Bio-based and biodegradable polymers for composites: Sustainability, challenges, and future perspectives
Bernard Miranda Campos, Jean-Baptiste Jouenne, Simon Begrem, Patricia Jouannot-Chesney, Ridha Mosrati and Joël BréardJournal of Environmental Chemical Engineering 13 (6) 119306 (2025)
https://doi.org/10.1016/j.jece.2025.119306
Modifying the Mechanical, Viscoelastic, Thermal, and Degradation Properties of PLA/PBAT Blends With Nanoclay and PEG
V. Sooraj, Sai Gopal Krishna Bhagavatula and Murugasamy KannanJournal of Applied Polymer Science 142 (26) (2025)
https://doi.org/10.1002/app.57087
On the Evaluation of Flow Properties Characterizing Blown Film Extrusion of Polyolefin Alternatives
Petr Filip, Berenika Hausnerova, Dagmar Endlerova, Bernhard Möginger and Juliana AzevedoPolymers 17 (17) 2353 (2025)
https://doi.org/10.3390/polym17172353
Polysulfone Hollow Fiber Membrane Mixed with Peat Clay Particles: Fabrication and Properties
Muthia Elma, Riani Ayu Lestari, Gusti Ratu Sri Dewi, Noor Rahmadhaniah, Zahra Tunnisa, Rhafiq Abdul Ghani, Aulia Rahma, Rendy Muhamad Iqbal and Mohd Hafiz Dzarfan OthmanDiffusion Foundations and Materials Applications 37 3 (2024)
https://doi.org/10.4028/p-VFQsl5
Fiber treatment impact on toughness and interfacial bonding in epoxidized soya bean oil compatibilized PLA/PBAT bamboo fiber composites
Kehinde Olonisakin, Huiping Lin, Pan Haojin, Wen Aishi, Haopeng Wang, Ran Li, Zhang Xin-Xiang and Wenbin YangMaterials Today Communications 38 107790 (2024)
https://doi.org/10.1016/j.mtcomm.2023.107790
A comparison of physical, morphological, and mechanical properties of bio‐polyester hybrid nanocomposites
Abjesh Prasad Rath, P. Santhana Gopala Krishnan and Krishnan KannyPolymers for Advanced Technologies 35 (9) (2024)
https://doi.org/10.1002/pat.6566
Effect of fiber orientation on the mechanical properties of a biodegradable composite made from lyocell‐fiber reinforced polybutylene adipate terephthalate
Michael Cordin, Thomas Bechtold, Trinh‐Tung Ngo and Tung PhamJournal of Applied Polymer Science 141 (43) (2024)
https://doi.org/10.1002/app.56121
Optimizing mechanical properties and pioneering biodegradable polymer blends for superior energy-absorbing structures used in sport helmets
Mateusz Skwarski, Paweł Kaczyński, Anna Dmitruk, Piotr Makuła and Joanna LudwiczakArchives of Civil and Mechanical Engineering 25 (1) (2024)
https://doi.org/10.1007/s43452-024-01075-5
Thermo-pressed blend films of poly(lactic acid)/poly(butylene adipate-co-terephthalate) with polylimonene for sustainable active food packaging
Gabriel Ferreira Toledo, Guilherme Frey Schutz, Luís Marangoni Júnior and Roniérik Pioli VieiraSustainable Materials and Technologies 41 e01099 (2024)
https://doi.org/10.1016/j.susmat.2024.e01099
Toughening of poly(lactic acid) (PLA) with poly(butylene adipate-co-terephthalate) (PBAT): a morphological, thermal, mechanical, and degradation evaluation in a simulated marine environment
Luíza Schmitz, Júlio Harada, Willian B. Ribeiro, Derval Santos Rosa and Rosmary N. BrandaliseColloid and Polymer Science 301 (12) 1405 (2023)
https://doi.org/10.1007/s00396-023-05157-3
Influence of PBS, PBAT and TPS content on tensile and processing properties of PLA-based polymeric blends at different temperatures
Anna Dmitruk, Joanna Ludwiczak, Mateusz Skwarski, Piotr Makuła and Paweł KaczyńskiJournal of Materials Science 58 (4) 1991 (2023)
https://doi.org/10.1007/s10853-022-08081-z
Flexible and green multilayer paper coating for barrier enhancement of paper packaging
Hormoz Eslami and Tizazu H. MekonnenSustainable Materials and Technologies 37 e00694 (2023)
https://doi.org/10.1016/j.susmat.2023.e00694
UV resistance and biodegradation of PLA-based polymeric blends doped with PBS, PBAT, TPS
Joanna Ludwiczak, Anna Dmitruk, Mateusz Skwarski, Paweł Kaczyński and Piotr MakułaInternational Journal of Polymer Analysis and Characterization 28 (4) 366 (2023)
https://doi.org/10.1080/1023666X.2023.2218696
Poly(lactic acid)-Based Blends: A Comprehensive Review
Leonid Ilyich Vayshbeyn, Elena Evgenyevna Mastalygina, Anatoly Aleksandrovich Olkhov and Maria Victorovna PodzorovaApplied Sciences 13 (8) 5148 (2023)
https://doi.org/10.3390/app13085148
Biodegradable Functional Inorganic/Organic Hybrid Composite Materials for Transient Electronic Devices
Yong-Wu Kim, Kyung-Sub Kim and Seung-Kyun KangJournal of Flexible and Printed Electronics 2 (1) 25 (2023)
https://doi.org/10.56767/jfpe.2023.2.1.25
Synthesis of color tunable piezoelectric nanogenerators using CsPbX3 perovskite nanocrystals embedded in poly(D,L-lactide) membranes
Sk Shamim Hasan Abir, Julio E. Trevino, Bhupendra B. Srivastava, Muhtasim Ul Karim Sadaf, Julia I. Salas, Karen Lozano and Mohammed Jasim UddinNano Energy 102 107674 (2022)
https://doi.org/10.1016/j.nanoen.2022.107674
Viscoelastic Characterization and Degradation Stability Investigation of Poly(butylene-adipate-co-terephthalate) – Calcium-Phosphate Glass Composites
Elena Togliatti, Daniel Milanese, Diego Pugliese and Corrado SciancaleporeJournal of Polymers and the Environment 30 (9) 3914 (2022)
https://doi.org/10.1007/s10924-022-02479-1
The Potential of an Itaconic Acid Diester as Environmentally Friendly Plasticizer for Injection‐Molded Polylactide Parts
Juan Ivorra‐Martinez, Miguel Angel Peydro, Jaume Gomez‐Caturla, Teodomiro Boronat and Rafa BalartMacromolecular Materials and Engineering 307 (12) (2022)
https://doi.org/10.1002/mame.202200360
WITHDRAWN: The effect of type and ratios of secondary materials on some mechanical properties of the ternary polymer blends based on the unsaturated polyester
Salam Obaid Abdulghani, Sihama Issa Salih and Khalid Hamdi RazzegMaterials Today: Proceedings (2021)
https://doi.org/10.1016/j.matpr.2021.04.608
Uncompatibilized PBAT/PLA Blends: Manufacturability, Miscibility and Properties
Shen Su, Mona Duhme and Rodion KopitzkyMaterials 13 (21) 4897 (2020)
https://doi.org/10.3390/ma13214897