Investigation of microstructure and hardness of a rib geometry produced by metal forming and wire-arc additive manufacturing
MATEC Web Conf., 190 (2018) 02005
Published online: 2018-09-18
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Hybrid wire-arc additive manufacturing of sheet metal components with three-dimensional features
Pedro MS Rosado, Rui FV Sampaio, João M Medeiros, João PM Pragana, Ivo MF Bragança, Carlos MA Silva and Paulo AF MartinsProgress in Additive Manufacturing (2026)
https://doi.org/10.1007/s40964-026-01549-3
Role of torch angle in dry sliding wear performance of Al5356 walls produced by wire arc additive manufacturing process
Saravana Kumar Murugesan, Jeyaprakash Natarajan and Che-Hua YangThe International Journal of Advanced Manufacturing Technology 137 (9-10) 5185 (2025)
https://doi.org/10.1007/s00170-025-15485-z
Hybrid Manufacturing: A Critical Review on the Integration of Metal Additive Manufacturing and Forming
Anamul Hasan and Syed Sohail AkhtarArabian Journal for Science and Engineering (2025)
https://doi.org/10.1007/s13369-025-10885-5
Investigating the microstructure and mechanical behavior of optimized eutectic Al Si alloy developed by direct energy deposition
M. Hemachandra, Ramesh Mamedipaka, Adepu Kumar and Shivraman ThapliyalJournal of Manufacturing Processes 110 398 (2024)
https://doi.org/10.1016/j.jmapro.2024.01.002
Hybrid process chains combining metal additive manufacturing and forming – A review
Jan Hafenecker, Dominic Bartels, Clara-Maria Kuball, Maximilian Kreß, Richard Rothfelder, Michael Schmidt and Marion MerkleinCIRP Journal of Manufacturing Science and Technology 46 98 (2023)
https://doi.org/10.1016/j.cirpj.2023.08.002
Alternating Additive Manufacturing and Forming—An Innovative Manufacturing Approach
Thomas Papke, Jan Hafenecker, David Römisch, et al.Journal of Manufacturing and Materials Processing 7 (3) 90 (2023)
https://doi.org/10.3390/jmmp7030090
Vision on metal additive manufacturing: Developments, challenges and future trends
Alain Bernard, Jean-Pierre Kruth, Jian Cao, Gisela Lanza, Stefania Bruschi, Marion Merklein, Tom Vaneker, Michael Schmidt, John W. Sutherland, Alkan Donmez and Eraldo J. da SilvaCIRP Journal of Manufacturing Science and Technology 47 18 (2023)
https://doi.org/10.1016/j.cirpj.2023.08.005
Recent Advances in Manufacturing Processes and Systems
Falak P. Patel, Bhumi K. Patel and Vishvesh J. BadhekaLecture Notes in Mechanical Engineering, Recent Advances in Manufacturing Processes and Systems 1013 (2022)
https://doi.org/10.1007/978-981-16-7787-8_80
A review of hybrid additive manufacturing of metal parts
A. V. Balyakin, M. A. Oleynik, E. P. Zlobin and D. L. SkuratovVESTNIK of Samara University. Aerospace and Mechanical Engineering 21 (2) 48 (2022)
https://doi.org/10.18287/2541-7533-2022-21-2-48-64
The Trajectory of Additively Manufactured Titanium Alloys with Superior Mechanical Properties and Engineered Microstructures
Saeid Alipour, Atieh Moridi, Frank Liou and Arezoo EmdadiAdditive Manufacturing 60 103245 (2022)
https://doi.org/10.1016/j.addma.2022.103245
Post fabrication thermomechanical processing of additive manufactured metals: A review
Shawkat Imam Shakil, Noah Robert Smith, Samuel Paul Yoder, Brenden Edward Ross, Dylan James Alvarado, Amir Hadadzadeh and Meysam HaghshenasJournal of Manufacturing Processes 73 757 (2022)
https://doi.org/10.1016/j.jmapro.2021.11.047
Microstructural characterization and mechanical integrity of stainless steel 316L clad layers deposited via wire arc additive manufacturing for nuclear applications
A. Rajesh Kannan, S. Mohan Kumar, R. Pramod, N. Siva Shanmugam, M. Vishnukumar and S. NaveenkumarMaterialwissenschaft und Werkstofftechnik 52 (6) 617 (2021)
https://doi.org/10.1002/mawe.202000242
Influence of Stress States on Forming Hybrid Parts with Sheet Metal and Additively Manufactured Element
Jan Hafenecker, Thomas Papke and Marion MerkleinJournal of Materials Engineering and Performance 30 (7) 5159 (2021)
https://doi.org/10.1007/s11665-021-05674-8
Topology Optimisation in Structural Steel Design for Additive Manufacturing
Tiago P. Ribeiro, Luís F. A. Bernardo and Jorge M. A. AndradeApplied Sciences 11 (5) 2112 (2021)
https://doi.org/10.3390/app11052112
Formation of Structure and Properties of Two-Phase Ti-6Al-4V Alloy during Cold Metal Transfer Additive Deposition with Interpass Forging
Yuri Shchitsyn, Maksim Kartashev, Ekaterina Krivonosova, Tatyana Olshanskaya and Dmitriy TrushnikovMaterials 14 (16) 4415 (2021)
https://doi.org/10.3390/ma14164415
Wire and arc additive manufacturing: Opportunities and challenges to control the quality and accuracy of manufactured parts
Davoud Jafari, Tom H.J. Vaneker and Ian GibsonMaterials & Design 202 109471 (2021)
https://doi.org/10.1016/j.matdes.2021.109471
The Current State of Research of Wire Arc Additive Manufacturing (WAAM): A Review
Kai Treutler and Volker WeslingApplied Sciences 11 (18) 8619 (2021)
https://doi.org/10.3390/app11188619
Additive Fertigung eines hybriden Planetenträgers
Thomas Papke, Dominic Bartels, Harald Hofmann, et al.Zeitschrift für wirtschaftlichen Fabrikbetrieb 116 (7-8) 478 (2021)
https://doi.org/10.1515/zwf-2021-0124
Hybrid metal additive manufacturing: A state–of–the-art review
J.P.M. Pragana, R.F.V. Sampaio, I.M.F. Bragança, C.M.A. Silva and P.A.F. MartinsAdvances in Industrial and Manufacturing Engineering 2 100032 (2021)
https://doi.org/10.1016/j.aime.2021.100032
Structure formation of titanium alloys during vacuum-arc surfacing
G L Permyakov, T V Olshanskaya, E A Krivonosova and D N TrushnikovIOP Conference Series: Materials Science and Engineering 1014 (1) 012043 (2021)
https://doi.org/10.1088/1757-899X/1014/1/012043
Microstructure and mechanical properties of high strength steel deposits obtained by Wire-Arc Additive Manufacturing
Clément Bourlet, Sandra Zimmer-Chevret, Raphaël Pesci, Régis Bigot, Aurélien Robineau and Fabrice ScandellaJournal of Materials Processing Technology 285 116759 (2020)
https://doi.org/10.1016/j.jmatprotec.2020.116759
Comparative study of eutectic Al-Si alloys manufactured by WAAM and casting
Geir Langelandsvik, Annbjørg Horgar, Trond Furu, Hans J. Roven and Odd M. AkselsenThe International Journal of Advanced Manufacturing Technology 110 (3-4) 935 (2020)
https://doi.org/10.1007/s00170-020-05735-7
Material Properties of Features Produced from EN AW 6016 by Wire-Arc Additive Manufacturing
Ismail Ünsal, Markus Hirtler, Alexander Sviridov and Markus BambachProcedia Manufacturing 47 1129 (2020)
https://doi.org/10.1016/j.promfg.2020.04.131
Use of CMT-Surfacing for Additive Formation of Titanium Alloy Workpieces
Yu. D. Shchitsyn, E. A. Krivonosova, D. N. Trushnikov, et al.Metallurgist 64 (1-2) 67 (2020)
https://doi.org/10.1007/s11015-020-00967-0
Hybrid manufacturing of components from Ti-6Al-4V by metal forming and wire-arc additive manufacturing
M. Bambach, I. Sizova, B. Sydow, S. Hemes and F. MeinersJournal of Materials Processing Technology 282 116689 (2020)
https://doi.org/10.1016/j.jmatprotec.2020.116689
Residual Stress and Microstructure of a Ti-6Al-4V Wire Arc Additive Manufacturing Hybrid Demonstrator
Tatiana Mishurova, Benjamin Sydow, Tobias Thiede, Irina Sizova, Alexander Ulbricht, Markus Bambach and Giovanni BrunoMetals 10 (6) 701 (2020)
https://doi.org/10.3390/met10060701
2113 150017 (2019)
https://doi.org/10.1063/1.5112693
Current Status and Perspectives on Wire and Arc Additive Manufacturing (WAAM)
Tiago A. Rodrigues, V. Duarte, R. M. Miranda, Telmo G. Santos and J. P. OliveiraMaterials 12 (7) 1121 (2019)
https://doi.org/10.3390/ma12071121