Additive manufacture of superduplex stainless steel using WAAM
MATEC Web Conf., 188 (2018) 03014
Published online: 2018-08-07
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
131 (2025)
https://doi.org/10.4018/979-8-3373-0533-2.ch006
Development of Laser AM Process to Repair Damaged Super Duplex Stainless Steel Components
Abdul Ahmad, Paul Xirouchakis, Alastair Pearson, Frazer Brownlie and Yevgen GorashSustainability 17 (12) 5438 (2025)
https://doi.org/10.3390/su17125438
Effect of cold metal transfer (CMT) on the microstructure of as welded 2205 duplex stainless steel
R. Nagar, C. Gohil, K. K. Patel, V. Rao and S. SomanPractical Metallography 62 (7) 487 (2025)
https://doi.org/10.1515/pm-2025-0041
Additive Manufacturing by Arc Deposition: Study of Mechanical and Chemical Properties with Stainless Electrode ER 310
Gilson de March, Anderson Daleffe, Henrique Casagrande, Carlos Ferreira, Lírio Schaeffer and Alexander MilanezRevista de Gestão Social e Ambiental 19 (5) e012423 (2025)
https://doi.org/10.24857/rgsa.v19n5-138
Super duplex stainless steel fabricated by arc-based directed energy deposition: Microstructure evolution and phase field solidification simulation
Daysianne Kessy Mendes Isidorio, João da Cruz Payão Filho, Murali Uddagiri, Kimiya NouraniNiaki, Oleg Shchyglo and Ingo SteinbachMaterials & Design 254 114027 (2025)
https://doi.org/10.1016/j.matdes.2025.114027
Enhancing duplex stainless steel additive manufacturing with DED-LB/w: microstructural analysis and process optimization
Elin Marianne Westin, Maria Asuncion Valiente Bermejo, Björn Axelsson, Kjell Hurtig, Petter Hagqvist and Jan Yngve JonssonWelding in the World (2025)
https://doi.org/10.1007/s40194-025-02053-y
Influence of Welding Processes on the Microstructure and Mechanical Properties of Duplex Stainless Steel Parts Fabricated by Wire Arc Additive Manufacturing
Prasanna Nagasai Bellamkonda, Maheshwar Dwivedy, Malarvizhi Sudersanan and Balasubramanian VisvalingamMetals and Materials International 31 (2) 368 (2025)
https://doi.org/10.1007/s12540-024-01753-2
Microstructure Development in Duplex Stainless Steels from Additive Manufacturing with Coaxial Directed Energy Deposition and Heat Treatment
Trond Arne Hassel, Lene Anita Marken, Siri Marthe Arbo, Gisle Rørvik, Qiang Du, Vegard Brøtan and Knut SørbyMetallurgical and Materials Transactions A 56 (2) 474 (2025)
https://doi.org/10.1007/s11661-024-07560-z
Effect of Interlayer Cooling Time on Microstructure and Properties of 2205 Duplex Stainless Steel Made by Cold Metal Transfer
Ning Ou, Jiaxiang Xue, Qingkai Shen, Zehong Zheng and Xiaoyan Yusteel research international 96 (1) (2025)
https://doi.org/10.1002/srin.202400419
Corrosion, Impact Toughness and Tensile Properties of Duplex Stainless Steels Manufactured by Directed Energy Deposition
Trond Arne Hassel, Inge Morten Kulbotten, Siri Marthe Arbo, Gisle Rørvik, Vegard Brøtan and Knut SørbyMetallurgical and Materials Transactions A 56 (1) 269 (2025)
https://doi.org/10.1007/s11661-024-07586-3
Cold metal transfer technology - A review of recent research developments
Prasanna Nagasai Bellamkonda, Maheshwar Dwivedy and Ramaswamy AddankiResults in Engineering 23 102423 (2024)
https://doi.org/10.1016/j.rineng.2024.102423
Physical simulation of low temperature phase separation during multipass welding of super duplex stainless steel
Vahid A. Hosseini and Mattias ThuvanderWelding International 38 (4) 290 (2024)
https://doi.org/10.1080/09507116.2024.2329713
Experimental investigations and parametric effects on depositions of super duplex stainless steel in wire arc additive manufacturing
Prakash Kumar and Kuntal MajiProceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 238 (4) 1600 (2024)
https://doi.org/10.1177/09544089231158253
Influence of Deposition Mode on Microstructural and Mechanical Properties of Wire Arc Additive Manufactured 308L Stainless Steel Structures
Amrit Raj Paul, Manidipto Mukherjee, Dilpreet Singh, Manivannan Raja and Manas Kumar MondalJournal of Materials Engineering and Performance 33 (14) 7345 (2024)
https://doi.org/10.1007/s11665-023-08453-9
Process-microstructure-corrosion of additively manufactured steels: a review
M.H Ghoncheh, A. Shahriari, N. Birbilis and M. MohammadiCritical Reviews in Solid State and Materials Sciences 49 (4) 607 (2024)
https://doi.org/10.1080/10408436.2023.2255616
Study on Properties and Microstructure of Wire Arc Additive Manufactured 2209 Duplex Stainless Steel
Bellamkonda Prasanna Nagasai, Maheshwar Dwivedy, Sudersanan Malarvizhi, Visvalingam Balasubramanian, Addanki Ramaswamy, Pulivarthi Snehalatha and Nagavalli VegesnaMetallography, Microstructure, and Analysis 13 (3) 519 (2024)
https://doi.org/10.1007/s13632-024-01089-8
Optimizing the Phase Distribution in Arc-Based Direct Energy Deposition of Duplex Stainless Steel
H. Z. Attar, J. W. Fellowes, M. J. Roy, V. A. Hosseini and D. L. EngelbergMetallurgical and Materials Transactions A 55 (5) 1600 (2024)
https://doi.org/10.1007/s11661-024-07355-2
Microstructural Evolution and Its Influence on Low‐Temperature Toughness of Simulated Heat‐Affected Zone in Super Duplex Stainless Steel Welded Joint
Zhiqiang Zhang, Haoran Chu, Tiangang Zhang, Lianyong Xu, Xuecheng Lu, Sicheng Qu and Bo Liusteel research international 95 (2) (2024)
https://doi.org/10.1002/srin.202300460
Effect of build orientation and heat treatment on the microstructure, mechanical and corrosion performance of super duplex stainless steels fabricated via laser powder bed fusion
Karl Peter Davidson, Ruiliang Liu, Chenyang Zhu, Mehmet Cagiciri, Li Ping Tan, Alpravinosh Alagesan and Sarat SingamneniMaterials Advances 5 (20) 8177 (2024)
https://doi.org/10.1039/D4MA00448E
An Overview on Additive Manufacturing of Duplex Stainless Steels: Microstructure, Mechanical Properties, Corrosion Resistance, Postheat Treatment, and Future Perspectives
Sanjeevi Prakash Karunanithi, Rajesh Kannan Arasappan and Siva Shanmugam Nallathambisteel research international 95 (12) (2024)
https://doi.org/10.1002/srin.202400463
Duplex stainless steel 2209 with excellent properties deposited by plasma arc additive manufacturing without post heat-treatment: favorable phase ratio and no σ-phase
Haoquan Zhang, Kang Peng and Xizhang ChenArchives of Civil and Mechanical Engineering 24 (3) (2024)
https://doi.org/10.1007/s43452-024-00907-8
A Comparative Investigation of Duplex and Super Duplex Stainless Steels Processed through Laser Powder Bed Fusion
Leonidas Gargalis, Leonidas Karavias, Joachim S. Graff, Spyros Diplas, Elias P. Koumoulos and Evangelia K. KaraxiMetals 13 (11) 1897 (2023)
https://doi.org/10.3390/met13111897
Wire arc additive manufacturing of thin and thick walls made of duplex stainless steel
Antoine Queguineur, Reza Asadi, Marta Ostolaza, et al.The International Journal of Advanced Manufacturing Technology 127 (1-2) 381 (2023)
https://doi.org/10.1007/s00170-023-11560-5
Analysis and fast modelling of microstructures in duplex stainless steel formed by directed energy deposition additive manufacturing
Alexander Edwards, Daniel Weisz-Patrault and Éric CharkalukAdditive Manufacturing 61 103300 (2023)
https://doi.org/10.1016/j.addma.2022.103300
Corrosion resistance and microstructure analysis of additively manufactured 22% chromium duplex stainless steel by laser metal deposition with wire
Amir Baghdadchi, Claire Cary, Narasi Sridhar, Maria Asuncion Valiente Bermejo, Carolin Fink and Joel AnderssonJournal of Materials Research and Technology 26 6741 (2023)
https://doi.org/10.1016/j.jmrt.2023.09.037
Super duplex stainless steel with balance ratio produced by laser directed energy deposition (L-DED)
Yaowei Wang, Lianyong Xu, Yongdian Han, Lei Zhao, Heziqi Li, Kangda Hao and Wenjing RenJournal of Manufacturing Processes 105 213 (2023)
https://doi.org/10.1016/j.jmapro.2023.09.023
Additive Manufacturing Processes in Selected Corrosion Resistant Materials: A State of Knowledge Review
Alisiya Biserova-Tahchieva, Maria V. Biezma-Moraleda, Núria Llorca-Isern, Judith Gonzalez-Lavin and Paul LinhardtMaterials 16 (5) 1893 (2023)
https://doi.org/10.3390/ma16051893
Control of grain structure, phases, and defects in additive manufacturing of high-performance metallic components
T. Mukherjee, J.W. Elmer, H.L. Wei, T.J. Lienert, W. Zhang, S. Kou and T. DebRoyProgress in Materials Science 138 101153 (2023)
https://doi.org/10.1016/j.pmatsci.2023.101153
The Effects of ArC Voltage and Shielding Gas Type on the Microstructure of Wire ArC Additively Manufactured 2209 Duplex Stainless Steel
Dávid Miklós Kemény, Bence Sándor, Balázs Varbai and Levente Tamás KatulaAdvances in Materials Science 23 (4) 62 (2023)
https://doi.org/10.2478/adms-2023-0023
Microstructure and Properties of Wire Arc Additive Manufacturing of Inconel 625
Odd M. Akselsen, Ruben Bjørge, Håkon Wiik Ånes, Xiaobo Ren and Bård NyhusMetals 12 (11) 1867 (2022)
https://doi.org/10.3390/met12111867
Automation 2022: New Solutions and Technologies for Automation, Robotics and Measurement Techniques
Julia Wilk, Norbert Prokopiuk and Piotr FalkowskiAdvances in Intelligent Systems and Computing, Automation 2022: New Solutions and Technologies for Automation, Robotics and Measurement Techniques 1427 24 (2022)
https://doi.org/10.1007/978-3-031-03502-9_3
Mechanical response of dot-by-dot wire-and-arc additively manufactured 304L stainless steel bars under tensile loading
Vittoria Laghi, Michele Palermo, Lavinia Tonelli, et al.Construction and Building Materials 318 125925 (2022)
https://doi.org/10.1016/j.conbuildmat.2021.125925
Wire Arc Additive Manufacturing: A Comprehensive Review and Research Directions
Laukik P. Raut and Ravindra V. TaiwadeJournal of Materials Engineering and Performance 30 (7) 4768 (2021)
https://doi.org/10.1007/s11665-021-05871-5
Microstructure of laser metal deposited duplex stainless steel: Influence of shielding gas and heat treatment
Maria Asuncion Valiente Bermejo, Karthikeyan Thalavai Pandian, Björn Axelsson, et al.Welding in the World 65 (3) 525 (2021)
https://doi.org/10.1007/s40194-020-01036-5
Effect of Sigma Phase in Wire Arc Additive Manufacturing of Superduplex Stainless Steel
Odd M. Akselsen, Ruben Bjørge, Håkon Wiik Ånes, Xiaobo Ren and Bård NyhusMetals 11 (12) 2045 (2021)
https://doi.org/10.3390/met11122045
Non-destructive techniques for the detection of sigma phase in duplex stainless steel: A comprehensive review
M.V. Biezma, U. Martin, P. Linhardt, J. Ress, C. Rodríguez and D.M. BastidasEngineering Failure Analysis 122 105227 (2021)
https://doi.org/10.1016/j.engfailanal.2021.105227
Microstructural and Mechanical Characteristics of Cold Metal Transfer Weld Joints of UNS S32750
D. Arun and K. Devendranath RamkumarJournal of Materials Engineering and Performance 30 (11) 8095 (2021)
https://doi.org/10.1007/s11665-021-06015-5
Preservation of Natural Phase Balance in Multi-pass and Wire Arc Additive Manufacturing-Made Duplex Stainless Steel Structures
Farrokh Binesh, Alireza Bahrami, Mark Hebel and Daryush K. AidunJournal of Materials Engineering and Performance 30 (4) 2552 (2021)
https://doi.org/10.1007/s11665-021-05593-8
Plasma-assisted machining characteristics of wire arc additive manufactured stainless steel with different deposition directions
Seong-Gyu Kim, Choon-Man Lee and Dong-Hyeon KimJournal of Materials Research and Technology 15 3016 (2021)
https://doi.org/10.1016/j.jmrt.2021.09.130
Material testing and analysis of WAAM stainless steel
Pinelopi Kyvelou, Harry Slack, Craig Buchanan, M. Ahmer Wadee and Leroy Gardnerce/papers 4 (2-4) 1702 (2021)
https://doi.org/10.1002/cepa.1476
Conventional and Additively Manufactured Stainless Steels: A Review
J. R. Jessy Michla, Rajini Nagarajan, Senthilkumar Krishnasamy, et al.Transactions of the Indian Institute of Metals 74 (6) 1261 (2021)
https://doi.org/10.1007/s12666-021-02305-7
Wire Laser Metal Deposition Additive Manufacturing of Duplex Stainless Steel Components—Development of a Systematic Methodology
Amir Baghdadchi, Vahid A. Hosseini, Maria Asuncion Valiente Bermejo, Björn Axelsson, Ebrahim Harati, Mats Högström and Leif KarlssonMaterials 14 (23) 7170 (2021)
https://doi.org/10.3390/ma14237170
Microstructure and mechanical properties of carbon-bearing ultrahigh-strength high Co-Ni Steel (AerMet 340) fabricated via laser powder bed fusion
Kyu-Sik Kim, Young-Kyun Kim, Sangsun Yang, Bonuk Koo and Kee-Ahn LeeMaterialia 20 101244 (2021)
https://doi.org/10.1016/j.mtla.2021.101244
Effect of electromagnetic arc constriction applied in GTAW-based wire arc additive manufacturing on walls' geometry and microstructure
Miguel Guilherme Antonello, Alexandre Queiroz Bracarense, Cristiano José Scheuer and Natália De Freitas DaudtJournal of Manufacturing Processes 71 156 (2021)
https://doi.org/10.1016/j.jmapro.2021.09.015
The Current State of Research of Wire Arc Additive Manufacturing (WAAM): A Review
Kai Treutler and Volker WeslingApplied Sciences 11 (18) 8619 (2021)
https://doi.org/10.3390/app11188619
Formation of Austenite in Additively Manufactured and Post-Processed Duplex Stainless Steel Alloys
A. D. Iams, J. S. Keist and T. A. PalmerMetallurgical and Materials Transactions A 51 (2) 982 (2020)
https://doi.org/10.1007/s11661-019-05562-w
Wire Arc Additive Manufacturing of Stainless Steels: A Review
Wanwan Jin, Chaoqun Zhang, Shuoya Jin, Yingtao Tian, Daniel Wellmann and Wen LiuApplied Sciences 10 (5) 1563 (2020)
https://doi.org/10.3390/app10051563
Influence of the Interlayer Temperature on Structure and Properties of Wire and Arc Additive Manufactured Duplex Stainless Steel Product
Nikola Knezović, Ivica Garašić and Ivan JurićMaterials 13 (24) 5795 (2020)
https://doi.org/10.3390/ma13245795
Element partitioning and electron backscatter diffraction analysis from feeding wire to as-deposited microstructure of wire and arc additive manufacturing with super duplex stainless steel
Xiaoyong Zhang, Kehong Wang, Qi Zhou, et al.Materials Science and Engineering: A 773 138856 (2020)
https://doi.org/10.1016/j.msea.2019.138856
Microstructure characterization and tensile properties of CMT-based wire plus arc additive manufactured ER2594
Pranav Praveen Nikam, D. Arun, K. Devendranath Ramkumar and N. SivashanmugamMaterials Characterization 169 110671 (2020)
https://doi.org/10.1016/j.matchar.2020.110671
Mechanical and microstructural testing of wire and arc additively manufactured sheet material
Pinelopi Kyvelou, Harry Slack, Dafni Daskalaki Mountanou, et al.Materials & Design 192 108675 (2020)
https://doi.org/10.1016/j.matdes.2020.108675
Wire and arc additive manufacturing of metal components: a review of recent research developments
Jienan Liu, Yanling Xu, Yu Ge, Zhen Hou and Shanben ChenThe International Journal of Advanced Manufacturing Technology 111 (1-2) 149 (2020)
https://doi.org/10.1007/s00170-020-05966-8
GMAW Cold Wire Technology for Adjusting the Ferrite–Austenite Ratio of Wire and Arc Additive Manufactured Duplex Stainless Steel Components
Juliane Stützer, Tom Totzauer, Benjamin Wittig, Manuela Zinke and Sven JüttnerMetals 9 (5) 564 (2019)
https://doi.org/10.3390/met9050564
Wire-arc additive manufacturing of a duplex stainless steel: thermal cycle analysis and microstructure characterization
Vahid A Hosseini, Mats Högström, Kjell Hurtig, et al.Welding in the World 63 (4) 975 (2019)
https://doi.org/10.1007/s40194-019-00735-y