Failure behavior of PA12 based SLS lattice structure with macro-porosity
MATEC Web Conf., 188 (2018) 03007
Published online: 2018-08-07
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Design and evaluation of selective laser sintering of thermoset lattice structures
Md Shahjahan Mahmud, Md Sahid Hassan, Asahel Marinelarena-Diaz, Joshua Z. R. Dantzler, Saqlain Zaman, Prokash Chandra Roy, Dominic Dieguez, Diana Leyva, Alexis Lopez, Sabina Arroyo, Zhengtao Gan, Brian Schuster and Yirong LinProgress in Additive Manufacturing 10 (4) 2227 (2025)
https://doi.org/10.1007/s40964-024-00747-1
3D printing in art: use of thermoplastics and ceramics—the current state and limitations resulting from the possibilities of technology
Robert E. Przekop, Roksana Konieczna, Julia Głowacka, Bogna Sztorch, Maciej Głowacki and Beata KoteckaProgress in Additive Manufacturing (2025)
https://doi.org/10.1007/s40964-025-01015-6
Experimental and numerical mechanical characterisation of additively manufactured polymeric lattice structures under uniaxial tensile load
Danilo Bruson, Luca Iuliano and Manuela GalatiMeccanica 60 (3) 647 (2025)
https://doi.org/10.1007/s11012-024-01813-2
Experimental analysis of failure behaviour of PA12 specimens manufactured by SLS as a function of wall thickness and build direction
Alejandro Garcia Rodriguez, Marco Antonio Velasco Peña, Carlos A. Narváez-Tovar and Edgar Espejo MoraRapid Prototyping Journal 30 (8) 1537 (2024)
https://doi.org/10.1108/RPJ-01-2024-0038
Effect of Gamma Radiation on Selective Laser Sintered Nylon-12
Elizabeth Getto, Logan C. Schoffstall, Sidney Hall-Smith, Bradford Baker, Jonathan Slager, Peter J. Joyce and David P. DurkinJournal of Materials Engineering and Performance 33 (20) 11129 (2024)
https://doi.org/10.1007/s11665-023-08740-5
437 532 (2024)
https://doi.org/10.1007/978-3-031-44328-2_55
Analysis of compression and energy absorption behaviour of SLM printed AlSi10Mg triply periodic minimal surface lattice structures
P. Khanna, S. Sood, P. Mishra, V. Bharadwaj, A. Aggarwal and S.J. SinghStructures 64 106580 (2024)
https://doi.org/10.1016/j.istruc.2024.106580
Effect of PA12 powder recycling on properties of SLS 3D printed parts including their hygroscopicity
Jana Machotová, Marek Pagáč, Roman Svoboda, Jan Jansa, Štěpán Podzimek, Eva Černošková, Jiří Palarčík, Zuzana Koutová, Petr Kutálek and Lucie ZárybnickáEuropean Polymer Journal 220 113432 (2024)
https://doi.org/10.1016/j.eurpolymj.2024.113432
Methodology to predict mechanical properties of PA-12 lattice structures manufactured by powder bed fusion
R. Rodríguez-Aparicio, J.M. Alegre, W.M.H. Verbeeten, M. Lorenzo-Bañuelos and I.I. CuestaAdditive Manufacturing 78 103864 (2023)
https://doi.org/10.1016/j.addma.2023.103864
Mechanical Characterisation and Simulation of the Tensile Behaviour of Polymeric Additively Manufactured Lattice Structures
D. Bruson, M. Galati, F. Calignano and L. IulianoExperimental Mechanics 63 (7) 1117 (2023)
https://doi.org/10.1007/s11340-023-00976-5
Comparative Characterization of Hot-Pressed Polyamide 11 and 12: Mechanical, Thermal and Durability Properties
Mohsen Bahrami, Juana Abenojar and Miguel Angel MartínezPolymers 13 (20) 3553 (2021)
https://doi.org/10.3390/polym13203553
Application of Machine Learning Techniques to Predict the Mechanical Properties of Polyamide 2200 (PA12) in Additive Manufacturing
Ivanna BaturynskaApplied Sciences 9 (6) 1060 (2019)
https://doi.org/10.3390/app9061060