Microstructure characterisation of Inconel 718 after laser assisted turning
MATEC Web Conf., 188 (2018) 02004
Published online: 2018-08-07
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
The mechanism of the effect of dual-sided waterjet peening on the surface integrity and fatigue performance of 12 mm thick Inconel 718
Ping Zhang, Yeran Gao, Songting Zhang, Xiujie Yue, Shunxiang Wang and Zhenyong LinInternational Journal of Fatigue 178 108011 (2024)
https://doi.org/10.1016/j.ijfatigue.2023.108011
Investigation on micro-cutting and chip formation mechanism of CoCrFeNiAlX series high-entropy alloy
Ping Zhang, Shunxiang Wang, Zhenyong Lin, Xiujie Yue, Hanping Zhou and Songting ZhangJournal of the Brazilian Society of Mechanical Sciences and Engineering 46 (3) (2024)
https://doi.org/10.1007/s40430-024-04705-4
Investigation of residual stress formation mechanism with water jet strengthening of CoCrFeNiAlx high-entropy alloy
Ping Zhang, Yeran Gao, Songting Zhang, Xiujie Yue, Shunxiang Wang and Zhenyong LinVacuum 217 112446 (2023)
https://doi.org/10.1016/j.vacuum.2023.112446
Effect of ZrB2 Particles on Machining Parameters of AA7475 Alloy-Based Composites by Optimization Technique
C. R. Mahesha, R. Suprabha, R. Suresh Kumar, et al.Advances in Materials Science and Engineering 2023 1 (2023)
https://doi.org/10.1155/2023/8573440
Analysis of the machinability of different types of sintered carbides with WEDM in both water and oil baths
Katerina Mouralova, Libor Benes, Tomas Prokes, et al.The International Journal of Advanced Manufacturing Technology 125 (5-6) 2705 (2023)
https://doi.org/10.1007/s00170-023-10913-4
Spatial gradient prediction and characterization of yield strength in the heat-affected zone in laser-assisted machining of Inconel 718
Hang Zhang, Ben Deng, Jieyu Lin, Xiaowei Tang, Rong Yan and Fangyu PengOptics & Laser Technology 163 109409 (2023)
https://doi.org/10.1016/j.optlastec.2023.109409
Effect of T6I4 and T616 on the machinability of 7075 aluminum alloy and tool wear mechanism
Ping Zhang, Yeran Gao, Shunxiang Wang, Zehua Liu, Zhenyong Lin, Songting Zhang and Xiujie YueThe International Journal of Advanced Manufacturing Technology 127 (9-10) 4453 (2023)
https://doi.org/10.1007/s00170-023-11733-2
CNC Machinability study of AISI 316L & Optimization of Machining parameters using TLBO algorithm
Sumon Kundu, Bikash Choudhuri and Ruma SenMaterials Today: Proceedings 62 1218 (2022)
https://doi.org/10.1016/j.matpr.2022.04.473
Analysis of the Root Causes of Damage to the Edges of Tank Manholes on the Main Deck of Handy-Size Bulk Carriers
Leszek Chybowski and Katarzyna GawdzińskaMaterials 14 (3) 632 (2021)
https://doi.org/10.3390/ma14030632
Experimental Investigation of Al-CuMgMn Alloy Developed by Laser Beam Surface Modification for Wear Resistance
Mesay Alemu Tolcha, Moera Gutu Jiru and Hirpa Gelgele LemuMetals 11 (5) 712 (2021)
https://doi.org/10.3390/met11050712
A study on the process efficiency of laser-assisted machining investigating energy consumption
Won-Jung Oh and Choon-Man LeeThe International Journal of Advanced Manufacturing Technology 113 (3-4) 867 (2021)
https://doi.org/10.1007/s00170-021-06651-0
Analytical model of cutting force in axial ultrasonic vibration-assisted milling in-situ TiB2/7050Al PRMMCs
Xiaofen LIU, Wenhu WANG, Ruisong JIANG, et al.Chinese Journal of Aeronautics 34 (4) 160 (2021)
https://doi.org/10.1016/j.cja.2020.08.009
Understanding the behaviour of workpieces' bulk temperature during laser-assisted turning of Ti6Al4V alloy and heating of Al-SiC metal-matrix composite rods
Chao Wei, Wei Guo, Bo Gao, et al.Optics & Laser Technology 139 106951 (2021)
https://doi.org/10.1016/j.optlastec.2021.106951
A review on applications of artificial intelligence in modeling and optimization of laser beam machining
Ali Naderi Bakhtiyari, Zhiwen Wang, Liyong Wang and Hongyu ZhengOptics & Laser Technology 135 106721 (2021)
https://doi.org/10.1016/j.optlastec.2020.106721
Tool Wear Prediction Based on Artificial Neural Network during Aluminum Matrix Composite Milling
Martyna Wiciak-Pikuła, Agata Felusiak-Czyryca and Paweł TwardowskiSensors 20 (20) 5798 (2020)
https://doi.org/10.3390/s20205798
Effect of tool microstructure on machining of titanium alloy TC21 based on simulation and experiment
Xiaohua Qian and Xiongying DuanThe International Journal of Advanced Manufacturing Technology 111 (7-8) 2301 (2020)
https://doi.org/10.1007/s00170-020-06248-z
Influence of Microstructure and Chemical Composition on Microhardness and Wear Properties of Laser Borided Monel 400
Mateusz Kukliński, Aneta Bartkowska, Damian Przestacki and Grzegorz KinalMaterials 13 (24) 5757 (2020)
https://doi.org/10.3390/ma13245757
Characterization of W–Cr Metal Matrix Composite Coatings Reinforced with WC Particles Produced on Low-Carbon Steel Using Laser Processing of Precoat
Dariusz Bartkowski, Aneta Bartkowska, Paweł Popielarski, Jakub Hajkowski and Adam PiaseckiMaterials 13 (22) 5272 (2020)
https://doi.org/10.3390/ma13225272
255 (2020)
https://doi.org/10.1109/MetroAeroSpace48742.2020.9160064
Properties of Jet-Plated Ni Coating on Ti Alloy (Ti6Al4V) with Laser Cleaning Pretreatment
Xiao Wang, Mingyang Xu, Zhanwen Wang, Lida Shen, Mingbo Qiu, Zongjun Tian, Muhammad Naveed Ahsan and Changjiang WangMetals 9 (2) 248 (2019)
https://doi.org/10.3390/met9020248
Experimental Investigation of Productivity, Specific Energy Consumption, and Hole Quality in Single-Pulse, Percussion, and Trepanning Drilling of IN 718 Superalloy
Shoaib Sarfraz, Essam Shehab, Konstantinos Salonitis and Wojciech SuderEnergies 12 (24) 4610 (2019)
https://doi.org/10.3390/en12244610