Sensitivity analysis for effects of displacement amplitude and loading frequency on low-cycle fatigue lifetime in carbon/epoxy laminated composites
MATEC Web Conf., 165 (2018) 22021
Published online: 2018-05-25
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Fatigue behavior and nonlinear life prediction of open-hole thermoplastic composite laminates with drilling-induced delamination
Çağrı İlhan and Ulvi ŞekerEngineering Fracture Mechanics 320 111076 (2025)
https://doi.org/10.1016/j.engfracmech.2025.111076
Optimization of 3D printing parameters in polylactic acid bio-metamaterial under cyclic bending loading considering fracture features
Ali Dadashi and Mohammad AzadiHeliyon 10 (4) e26357 (2024)
https://doi.org/10.1016/j.heliyon.2024.e26357
(2023)
https://doi.org/10.2139/ssrn.4579611
Metamodeling-assisted probabilistic first ply failure analysis of laminated composite plates—RS-HDMR- and GPR-based approach
Subrata Kushari, Kritesh Kumar Gupta, Vaishali and Sudip DeyJournal of the Brazilian Society of Mechanical Sciences and Engineering 44 (8) (2022)
https://doi.org/10.1007/s40430-022-03674-w
Probabilistic stability analysis of soil nailed vertical excavation using Monte Carlo simulation (MCS)
Surya Muthukumar, Dhanya Sathyan and Sanjay Kumar ShuklaMaterials Today: Proceedings 65 1354 (2022)
https://doi.org/10.1016/j.matpr.2022.04.286
Sensitivity analysis of mechanical properties and ductile/brittle behaviors in aluminum‐silicon alloy to loading rate and nano‐particles, considering interaction effects
Mohammad Azadi, Mohammad Zomorodipour and Abdoulhossein FereidoonEngineering Reports 3 (6) (2021)
https://doi.org/10.1002/eng2.12341
High-cycle bending fatigue properties of additive-manufactured ABS and PLA polymers fabricated by fused deposition modeling 3D-printing
M. Azadi, A. Dadashi, S. Dezianian, et al.Forces in Mechanics 3 100016 (2021)
https://doi.org/10.1016/j.finmec.2021.100016
Influences of reinforcement and displacement rate on microstructure, mechanical properties and fracture behaviors of cylinder-head aluminum alloy
Kianoosh Rashnoo, Mohammad Jafar Sharifi, Mohammad Azadi and Mahboobeh AzadiMaterials Chemistry and Physics 255 123441 (2020)
https://doi.org/10.1016/j.matchemphys.2020.123441