EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues MATEC Web Conf., 165 (2018) 02005 Article references

Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

Microstructural and mechanical insights into 1.2709 maraging steel produced by direct energy deposition

Angelina Strakošová, Daniel Kvapil, Filip Průša, Marek Vronka, Petr Svora, Pavel Lejček and Dalibor Vojtěch
Journal of Materials Science 60 (38) 17933 (2025)
https://doi.org/10.1007/s10853-025-11439-8

Influence of Inclusion Parameter and Depth on the Rotating Bending Fatigue Behavior of Bearing Steel

Lijun Xu, Zhonghua Zhan and Shulan Zhang
Metals 14 (8) 907 (2024)
https://doi.org/10.3390/met14080907

Heterogeneous effect of aging temperature on the fatigue life of additively manufactured thin-walled 18Ni300 maraging steel tubular specimen

Aleksander Karolczuk, Andrzej Kurek, Michał Böhm, Szymon Derda, Mariusz Prażmowski, Krzysztof Kluger, Krzysztof Żak, Łukasz Pejkowski and Jan Seyda
Materials & Design 237 112561 (2024)
https://doi.org/10.1016/j.matdes.2023.112561

Study of dynamic behaviour via Taylor anvil test and structure observation of M300 maraging steel fabricated by the selective laser melting method

Stepan Kolomy, Miroslav Jopek, Josef Sedlak, Marek Benc and Jan Zouhar
Journal of Manufacturing Processes 125 283 (2024)
https://doi.org/10.1016/j.jmapro.2024.07.057

Fracture mechanics-based analysis of the fatigue limit of Ti6Al4V alloy specimens manufactured by SLM in as-built surface conditions by means of areal measurements

D. Rigon, F. Coppola and G. Meneghetti
Engineering Fracture Mechanics 295 109720 (2024)
https://doi.org/10.1016/j.engfracmech.2023.109720

Fatigue performance of metal additive manufacturing: a comprehensive overview

Hamidreza Javidrad, Bahattin Koc, Hakan Bayraktar, Ugur Simsek and Kadir Gunaydin
Virtual and Physical Prototyping 19 (1) (2024)
https://doi.org/10.1080/17452759.2024.2302556

Estimating the fatigue thresholds of additively manufactured metallic materials with consideration of defects

D. Rigon and G. Meneghetti
Procedia Structural Integrity 38 70 (2022)
https://doi.org/10.1016/j.prostr.2022.03.008

Feature-based volumetric defect classification in metal additive manufacturing

Arun Poudel, Mohammad Salman Yasin, Jiafeng Ye, et al.
Nature Communications 13 (1) (2022)
https://doi.org/10.1038/s41467-022-34122-x

Engineering estimation of the fatigue limit of wrought and defective additively manufactured metals for different load ratios

D. Rigon and G. Meneghetti
International Journal of Fatigue 154 106530 (2022)
https://doi.org/10.1016/j.ijfatigue.2021.106530

Defects in additive manufactured metals and their effect on fatigue performance: A state-of-the-art review

Niloofar Sanaei and Ali Fatemi
Progress in Materials Science 117 100724 (2021)
https://doi.org/10.1016/j.pmatsci.2020.100724

Fatigue strength estimation methodology of additively manufactured metallic bulk material

W. Schneller, M. Leitner, S. Leuders, J.M. Sprauel, F. Grün, T. Pfeifer and O. Jantschner
Additive Manufacturing 39 101688 (2021)
https://doi.org/10.1016/j.addma.2020.101688

Effects of notch-load interactions on the mechanical performance of 3D printed tool steel 18Ni300

Shahriar Afkhami, Edris Dabiri, Kalle Lipiäinen, Heidi Piili and Timo Björk
Additive Manufacturing 47 102260 (2021)
https://doi.org/10.1016/j.addma.2021.102260

An engineering approach to estimate fatigue thresholds of wrought and additively manufactured defective metallic materials

D. Rigon and G. Meneghetti
Procedia Structural Integrity 34 154 (2021)
https://doi.org/10.1016/j.prostr.2021.12.022

In-situ investigation on fatigue behaviors of Ti-6Al-4V manufactured by selective laser melting

Guian Qian, Zhimo Jian, Xiangnan Pan and Filippo Berto
International Journal of Fatigue 133 105424 (2020)
https://doi.org/10.1016/j.ijfatigue.2019.105424

Determination of the influence of a stress-relief heat treatment and additively manufactured surface on the fatigue behavior of selectively laser melted AISI 316L by using efficient short-time procedures

Bastian Blinn, Florian Krebs, Maximilian Ley, Roman Teutsch and Tilmann Beck
International Journal of Fatigue 131 105301 (2020)
https://doi.org/10.1016/j.ijfatigue.2019.105301

An engineering estimation of fatigue thresholds from a microstructural size and Vickers hardness: application to wrought and additively manufactured metals

Daniele Rigon and Giovanni Meneghetti
International Journal of Fatigue 139 105796 (2020)
https://doi.org/10.1016/j.ijfatigue.2020.105796

Post‐treatment selection for tailored fatigue performance of 18Ni300 maraging steel manufactured by laser powder bed fusion

Chola Elangeswaran, Kopila Gurung, Raphael Koch, Antonio Cutolo and Brecht Van Hooreweder
Fatigue & Fracture of Engineering Materials & Structures 43 (10) 2359 (2020)
https://doi.org/10.1111/ffe.13304

Influence of the Chemical Composition of the Used Powder on the Fatigue Behavior of Additively Manufactured Materials

Bastian Blinn, Florian Krebs, Maximilian Ley, Christopher Gläßner, Marek Smaga, Jan C. Aurich, Roman Teutsch and Tilmann Beck
Metals 9 (12) 1285 (2019)
https://doi.org/10.3390/met9121285

Additive Fertigung von Bauteilen und Strukturen

Maximilian Ley, Bastian Blinn, Christoph Petroll, Tillmann Beck and Roman Teutsch
Additive Fertigung von Bauteilen und Strukturen 57 (2019)
https://doi.org/10.1007/978-3-658-27412-2_4

Investigation of the anisotropic fatigue behavior of additively manufactured structures made of AISI 316L with short-time procedures PhyBaLLIT and PhyBaLCHT

Bastian Blinn, Maximilian Ley, Nils Buschhorn, Roman Teutsch and Tilmann Beck
International Journal of Fatigue 124 389 (2019)
https://doi.org/10.1016/j.ijfatigue.2019.03.022