EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues MATEC Web Conf., 157 (2018) 07016 Article references

Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

Development and Performance Evaluation of Bio Chopper for Agricultural Biomass Processing

Mohammad Afzal Hossain, Md. Moudud Ahmmed, Md. Anwar Hossen, Md. Mofazzel Hossain and Faria Rahman
Agricultural Sciences 17 (06) 493 (2026)
https://doi.org/10.4236/as.2026.176030

Experimental Study on the Mechanical Behavior of Dry Corn Stalk Cutting

Dominik Wilczyński, Krzysztof Wałęsa, Krzysztof Talaśka and Dominik Wojtkowiak
Materials 16 (8) 3039 (2023)
https://doi.org/10.3390/ma16083039

Experimental Study on the Cutting Process of Single Triticale Straws

Dominik Wilczyński, Krzysztof Talaśka, Krzysztof Wałęsa, Dominik Wojtkowiak and Michał Bembenek
Materials 16 (11) 3943 (2023)
https://doi.org/10.3390/ma16113943

Assumptions for Modeling of the Hot Plate Welding Process Considering the Automatic Welding Machine Design

Krzysztof Wałęsa, Aleksandra Biszczanik, Ireneusz Malujda, et al.
MATEC Web of Conferences 357 05002 (2022)
https://doi.org/10.1051/matecconf/202235705002

Directions of Development of Adaptive Systems to the Operating Conditions of Mobile Wood Chopping Machines with Low Power Engines

Łukasz Warguła, Mateusz Kukla, Piotr Krawiec, et al.
MATEC Web of Conferences 357 04002 (2022)
https://doi.org/10.1051/matecconf/202235704002

Influence of operational properties and material’s physical characteristics on mechanical cutting properties of corn stalks

Frank Gyan Okyere, Hyeon Tae Kim, Jayanta Kumar Basak, et al.
Journal of Biosystems Engineering 47 (2) 197 (2022)
https://doi.org/10.1007/s42853-022-00140-2

Development of a Testing Station for Empirical Verification of the Algebraic Model of Dry Ice Piston Extrusion

Jan Górecki
Acta Mechanica et Automatica 15 (3) 107 (2021)
https://doi.org/10.2478/ama-2021-0015

Experimental research of the thermoplastic belt plasticizing process in the hot plate welding

K Wałęsa, I Malujda and D Wilczyński
IOP Conference Series: Materials Science and Engineering 776 (1) 012011 (2020)
https://doi.org/10.1088/1757-899X/776/1/012011

The application of the Finite Element Method analysis in the process of designing the punching die for belt perforation

D Wojtkowiak, K Talaśka and A Fierek
IOP Conference Series: Materials Science and Engineering 776 (1) 012057 (2020)
https://doi.org/10.1088/1757-899X/776/1/012057

Multifactor analysis of experiment parameters on the example of the biomass cutting process

D Wilczyński
IOP Conference Series: Materials Science and Engineering 776 (1) 012013 (2020)
https://doi.org/10.1088/1757-899X/776/1/012013

The research on the characteristic of the cutting force while chipping of the Caucasian Fir (Abies Nordmanniana) with a single-shaft wood chipper

Ł Warguła and P Krawiec
IOP Conference Series: Materials Science and Engineering 776 (1) 012012 (2020)
https://doi.org/10.1088/1757-899X/776/1/012012

Preliminary analysis of the sensitivity of the algebraic dry ice agglomeration model using multi-channel dies to change their geometrical parameters

J Górecki
IOP Conference Series: Materials Science and Engineering 776 (1) 012030 (2020)
https://doi.org/10.1088/1757-899X/776/1/012030

Analysis of the guiding column and sleeve cooperation in the linear slide bearing of the punching die head-punch block

D Wojtkowiak, K Talaśka and M Berdychowski
IOP Conference Series: Materials Science and Engineering 776 (1) 012055 (2020)
https://doi.org/10.1088/1757-899X/776/1/012055

Application of the Mohr-Coulomb model for simulating the biomass compaction process

M Berdychowski, K Talaśka, I Malujda and M Kukla
IOP Conference Series: Materials Science and Engineering 776 (1) 012066 (2020)
https://doi.org/10.1088/1757-899X/776/1/012066

Research on the compaction process of loose materials with use of helix technology

M Berdychowski, D Wilczyński, K Wałęsa and J Górecki
IOP Conference Series: Materials Science and Engineering 776 (1) 012063 (2020)
https://doi.org/10.1088/1757-899X/776/1/012063

Biomass cutting tests to determine the lowest value of the process force

D Wilczyński, K Wałęsa, M Berdychowski and M Kukla
IOP Conference Series: Materials Science and Engineering 776 (1) 012014 (2020)
https://doi.org/10.1088/1757-899X/776/1/012014

The influence of the piercing punch profile on the stress distribution on its cutting edge

Dominik Wojtkowiak, Krzysztof Talaśka, I. Malujda, et al.
MATEC Web of Conferences 254 02001 (2019)
https://doi.org/10.1051/matecconf/201925402001

Experimental and numerical tests of the compaction process of loose material in the form of sawdust

Dominik Wilczyński, Maciej Berdychowski, Dominik Wojtkowiak, et al.
MATEC Web of Conferences 254 02042 (2019)
https://doi.org/10.1051/matecconf/201925402042

Functional and construction indicator for the briquetting process of lignocellulosic materials

Krzysztof Talaśka, Dominik Wojtkowiak, Ireneusz Malujda, et al.
MATEC Web of Conferences 254 05011 (2019)
https://doi.org/10.1051/matecconf/201925405011

Testing of a torque sensor used to measure the parameters of the briquetting process of lignocellulosic materials

Krzysztof Talaśka, Dominik Wojtkowiak, Ireneusz Malujda, et al.
MATEC Web of Conferences 254 05013 (2019)
https://doi.org/10.1051/matecconf/201925405013

Testing of a force sensor used to measure the briquetting process parameters of lignocellulosic materials

Krzysztof Talaśka, Dominik Wojtkowiak, Ireneusz Malujda, et al.
MATEC Web of Conferences 254 05012 (2019)
https://doi.org/10.1051/matecconf/201925405012