Experimental testing of PLA biodegradable thermoplastic in the frame of 3D printing FDM technology
MATEC Web Conf., 157 (2018) 06001
Published online: 2018-03-14
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
1 (2024)
https://doi.org/10.1109/ME61309.2024.10789760
Tribology Behavior of In-Situ FDM 3D Printed Glass Fibre-Reinforced Thermoplastic Composites
Yu Heng Liow, Khairul Izwan Ismail and Tze Chuen YapJournal of Research Updates in Polymer Science 13 86 (2024)
https://doi.org/10.6000/1929-5995.2024.13.10
Three‐dimensional (3D) woven flax fiber/polylactic acid (PLA) composites for high flexural strength
Awoke Fenta Wodag, Chunbing Yang, Shuo Gao, Ruijie Wang, Yudong Wang, Islam Md Azizul, Tamrat Tesfaye Yimer and Fujun XuPolymer Composites 45 (14) 13242 (2024)
https://doi.org/10.1002/pc.28700
Thermal Change Affects Flexural and Thermal Properties of Fused Deposition Modeling Poly(Lactic Acid) and Compression Molding Poly(Methyl Methacrylate)
Taksid Charasseangpaisarn, Chairat Wiwatwarrapan and Viritpon SrimaneepongEuropean Journal of Dentistry 17 (01) 136 (2023)
https://doi.org/10.1055/s-0042-1743148
Analysis of Parameters of Sintered Metal Components Created by ADAM and SLM Technologies
Pavol Timko, Tatiana Czánová, Andrej Czán, Silvia Slabejová, Jozef Holubjak and Miroslav CedzoManufacturing Technology 22 (3) 347 (2022)
https://doi.org/10.21062/mft.2022.032
Survey on compression property of sandwich 3D printed PLA components
Madheswaran Subramaniyan, Sivakumar Karuppan, Prabanjan P, Pugazh Anand A and Pynthamizh Vasanthan AMaterials Today: Proceedings 66 955 (2022)
https://doi.org/10.1016/j.matpr.2022.04.749
4D printing: Perspectives for the production of sustainable plastics for agriculture
Chrysanthos Maraveas, Ilker S. Bayer and Thomas BartzanasBiotechnology Advances 54 107785 (2022)
https://doi.org/10.1016/j.biotechadv.2021.107785
The influence of porosity, crystallinity and interlayer adhesion on the tensile strength of 3D printed polylactic acid (PLA)
Natalia von Windheim, David W. Collinson, Trent Lau, L. Catherine Brinson and Ken GallRapid Prototyping Journal 27 (7) 1327 (2021)
https://doi.org/10.1108/RPJ-08-2020-0205
Novel polymer materials systems to expand the capabilities of FDM™-type additive manufacturing
Truman J. Word, Ariana Guerrero and D. A. RobersonMRS Communications 11 (2) 129 (2021)
https://doi.org/10.1557/s43579-021-00011-5