Modelling mechanical properties of the multilayer composite materials with the polyamide core
MATEC Web Conf., 157 (2018) 02052
Published online: 2018-03-14
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Assessment of the Hazards Occurring During the Thermal Decomposition and Combustion Process in a Toothed Belt Transmission
Łukasz Warguła, Piotr Kaczmarzyk, Bartosz Wieczorek, Daniel Małozięć and Anna DziechciarzMaterials 18 (7) 1637 (2025)
https://doi.org/10.3390/ma18071637
Biocompatible green technology principles for the fabrication of food packaging material with noteworthy mechanical and antimicrobial properties-- A sustainable developmental goal towards the effective, safe food preservation strategy
S Priyanka, Karthick Raja Namasivayam S, Arvind Bharani R. S. and Arun JohnChemosphere 336 139240 (2023)
https://doi.org/10.1016/j.chemosphere.2023.139240
Modeling of Material Characteristics of Conventional Synthetic Fabrics
Arkadiusz Bydełek, Maciej Berdychowski and Krzysztof TalaśkaAUTEX Research Journal 23 (2) 200 (2023)
https://doi.org/10.2478/aut-2022-0002
Finite Element Analysis of the Axially Non-symmetrical Piercing Punches Performance for Belt Perforation
Dominik Wojtkowiak, Krzysztof Talaśka, M. Macko, et al.MATEC Web of Conferences 357 02001 (2022)
https://doi.org/10.1051/matecconf/202235702001
Problems of Removing Loos Biological Material from a Vacuum Accumulator
Krzysztof Tyszczuk, Grzegorz Domek, Andrzej Kołodziej, et al.MATEC Web of Conferences 357 02015 (2022)
https://doi.org/10.1051/matecconf/202235702015
Research of Material Properties for the Purposes of Modeling the Fabric Destruction Process
Maciej Berdychowski, Arkadiusz Bydełek, M. Macko, et al.MATEC Web of Conferences 357 06002 (2022)
https://doi.org/10.1051/matecconf/202235706002
Assumptions for Modeling of the Hot Plate Welding Process Considering the Automatic Welding Machine Design
Krzysztof Wałęsa, Aleksandra Biszczanik, Ireneusz Malujda, et al.MATEC Web of Conferences 357 05002 (2022)
https://doi.org/10.1051/matecconf/202235705002
Selecting a Flat Belts for the Model of Coupling with Flat Belts
Grzegorz Domek, Piotr Krawiec, Andrzej Kołodziej, et al.MATEC Web of Conferences 357 04003 (2022)
https://doi.org/10.1051/matecconf/202235704003
Mechanical Properties of the Materials Making up the Conveyor Belt Structure
Aleksandra Biszczanik, Ireneusz Malujda, Dominik Wilczyński, et al.MATEC Web of Conferences 357 07001 (2022)
https://doi.org/10.1051/matecconf/202235707001
A Coupled Eulerian-Lagrangian Simulation and Tool Optimization for Belt Punching Process with a Single Cutting Edge
Dominik Wojtkowiak, Krzysztof Talaśka, Dominik Wilczyński, Jan Górecki and Krzysztof WałęsaMaterials 14 (18) 5406 (2021)
https://doi.org/10.3390/ma14185406
Analysis of the guiding column and sleeve cooperation in the linear slide bearing of the punching die head-punch block
D Wojtkowiak, K Talaśka and M BerdychowskiIOP Conference Series: Materials Science and Engineering 776 (1) 012055 (2020)
https://doi.org/10.1088/1757-899X/776/1/012055
Analysis of angular deflection of bearing node in machine with toothed transport belt
M Berdychowski, I Malujda, K Wałęsa and A FierekIOP Conference Series: Materials Science and Engineering 776 (1) 012019 (2020)
https://doi.org/10.1088/1757-899X/776/1/012019
Designing of the Machine for Cutting Transport Belts: Conceptual Works
Aashutosh Kale, Aleksandra Biszczanik, Krzysztof Wałęsa, Mateusz Kukla, Maciej Berdychowski and Dominik WilczyńskiActa Mechanica et Automatica 14 (3) 144 (2020)
https://doi.org/10.2478/ama-2020-0021
The Toxicological Testing and Thermal Decomposition of Drive and Transport Belts Made of Thermoplastic Multilayer Polymer Materials
Piotr Krawiec, Łukasz Warguła, Daniel Małozięć, Piotr Kaczmarzyk, Anna Dziechciarz and Dorota Czarnecka-KomorowskaPolymers 12 (10) 2232 (2020)
https://doi.org/10.3390/polym12102232
Evaluation of the belt punching process efficiency based on the resistance force of the compressed material
Dominik Wojtkowiak, Krzysztof Talaśka and Dominik WilczyńskiThe International Journal of Advanced Manufacturing Technology 110 (3-4) 717 (2020)
https://doi.org/10.1007/s00170-020-05819-4
The application of the Finite Element Method analysis in the process of designing the punching die for belt perforation
D Wojtkowiak, K Talaśka and A FierekIOP Conference Series: Materials Science and Engineering 776 (1) 012057 (2020)
https://doi.org/10.1088/1757-899X/776/1/012057
Biomass cutting tests to determine the lowest value of the process force
D Wilczyński, K Wałęsa, M Berdychowski and M KuklaIOP Conference Series: Materials Science and Engineering 776 (1) 012014 (2020)
https://doi.org/10.1088/1757-899X/776/1/012014
Modelling of wear out of timing belt’s pulley
G Domek, A Kołodziej and M WilczyńskiIOP Conference Series: Materials Science and Engineering 776 (1) 012069 (2020)
https://doi.org/10.1088/1757-899X/776/1/012069
The influence of the piercing punch profile on the stress distribution on its cutting edge
Dominik Wojtkowiak, Krzysztof Talaśka, I. Malujda, et al.MATEC Web of Conferences 254 02001 (2019)
https://doi.org/10.1051/matecconf/201925402001
The temperature distribution during heating in hot plate welding process
Krzysztof Wałęsa, Ireneusz Malujda, Jan Górecki, et al.MATEC Web of Conferences 254 02033 (2019)
https://doi.org/10.1051/matecconf/201925402033
Influence of tension layer quality on mechanical properties of timing belts
Michał Wilczyński, Grzegorz Domek, I. Malujda, et al.MATEC Web of Conferences 254 05010 (2019)
https://doi.org/10.1051/matecconf/201925405010
Experimental research on the process of cutting transport belts
Dominik Wilczyński, Ireneusz Malujda, Jan Górecki, et al.MATEC Web of Conferences 254 05014 (2019)
https://doi.org/10.1051/matecconf/201925405014
Modelling a timing belt pitch
Grzegorz Domek, Michał Wilczyński, I. Malujda, et al.MATEC Web of Conferences 254 01011 (2019)
https://doi.org/10.1051/matecconf/201925401011
The influence of geometrical parameters of the forming channel on the boundary value of the axial force in the agglomeration process of dry ice
Jan Górecki, Ireneusz Malujda, Dominik Wilczyński, et al.MATEC Web of Conferences 254 05001 (2019)
https://doi.org/10.1051/matecconf/201925405001
Preliminary research of the thermomechanical properties of the round drive belts
Krzysztof Wałęsa, Olga Mysiukiewicz, Michał Pietrzak, et al.MATEC Web of Conferences 254 06007 (2019)
https://doi.org/10.1051/matecconf/201925406007
Modelling the Belt Perforation Process with the Piercing Punch and the Die in the Context of the Construction of the Punching Dies
D Wojtkowiak and K TalaśkaIOP Conference Series: Materials Science and Engineering 647 (1) 012013 (2019)
https://doi.org/10.1088/1757-899X/647/1/012013
Determination of the effective geometrical features of the piercing punch for polymer composite belts
Dominik Wojtkowiak and Krzysztof TalaśkaThe International Journal of Advanced Manufacturing Technology 104 (1-4) 315 (2019)
https://doi.org/10.1007/s00170-019-03746-7
Estimation of the perforation force for polymer composite conveyor belts taking into consideration the shape of the piercing punch
Dominik Wojtkowiak, Krzysztof Talaśka, Ireneusz Malujda and Grzegorz DomekThe International Journal of Advanced Manufacturing Technology 98 (9-12) 2539 (2018)
https://doi.org/10.1007/s00170-018-2381-3