EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues MATEC Web Conf., 157 (2018) 02027 Article references

Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

Computer-aided Eco-design Grinding Machines using Software SolidWorks Sustainability

Patrycja Bałdowska-Witos, Marek Macko, Daniel Łączny, et al.
MATEC Web of Conferences 357 02022 (2022)
https://doi.org/10.1051/matecconf/202235702022

Directions of Development of Adaptive Systems to the Operating Conditions of Mobile Wood Chopping Machines with Low Power Engines

Łukasz Warguła, Mateusz Kukla, Piotr Krawiec, et al.
MATEC Web of Conferences 357 04002 (2022)
https://doi.org/10.1051/matecconf/202235704002

The Use of Simulation Software using the Discrete Element Method (DEM) for the Process of Materials Comminution

Weronika Kruszelnicka, Marek Macko, Daniel Łączny, et al.
MATEC Web of Conferences 357 07005 (2022)
https://doi.org/10.1051/matecconf/202235707005

The Development of Efficient Contaminated Polymer Materials Shredding in Recycling Processes

Józef Flizikowski, Weronika Kruszelnicka and Marek Macko
Polymers 13 (5) 713 (2021)
https://doi.org/10.3390/polym13050713

Selection of parameters during shredding of corn stalks as an additive to the polymer

M Macko, D Łączny and J Lewandowski
IOP Conference Series: Materials Science and Engineering 1199 (1) 012061 (2021)
https://doi.org/10.1088/1757-899X/1199/1/012061

Analysis of the size of shredded particles in a multi-disc grinder

G Śmigielski, K Tyszczuk and A Mroziński
IOP Conference Series: Materials Science and Engineering 776 012010 (2020)
https://doi.org/10.1088/1757-899X/776/1/012010

Stress analysis of specimen with a reinforced thin layer

M Handrik, M Vaško, J Majko, P Kopas, L Jakubovičová, R Halama and M Fusek
IOP Conference Series: Materials Science and Engineering 776 012031 (2020)
https://doi.org/10.1088/1757-899X/776/1/012031

Symmetric Nature of Stress Distribution in the Elastic-Plastic Range of Pinus L. Pine Wood Samples Determined Experimentally and Using the Finite Element Method (FEM)

Łukasz Warguła, Dominik Wojtkowiak, Mateusz Kukla and Krzysztof Talaśka
Symmetry 13 (1) 39 (2020)
https://doi.org/10.3390/sym13010039

The problem of fixing the axisymmetric elements on the example of pulley mounting on the shaft

G Domek, A Kołodziej and I Dziubek
IOP Conference Series: Materials Science and Engineering 776 012070 (2020)
https://doi.org/10.1088/1757-899X/776/1/012070

The problems of measuring the temperature of the small engines (SI) on the example of a drive for non-road mobile machines

Łukasz Wargula, Konrad Jan Waluś, Piotr Krawiec, et al.
MATEC Web of Conferences 254 04004 (2019)
https://doi.org/10.1051/matecconf/201925404004