A Review of Bio-lubricant Production from Vegetable Oils Using Esterification Transesterification Process
MATEC Web Conf., 156 (2018) 06007
Published online: 2018-03-14
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Sustainable Bio-Lubricants From Vegetable Oils: Chemical Modification and Waste-Derived Nanoparticles—A Review
Ravendra Kumar Pal and Amit SuhaneJournal of Tribology 148 (3) (2026)
https://doi.org/10.1115/1.4070061
Brassica Carinata Oil for Sustainable Biolubricants: Advances in Modification, Nanocatalysis, and Future Prospects
Yohannes Assefa Degaga, Shimelis Kebede Kassahun, Sintayehu Nibret Tiruneh and Dominik LeverenzChemistrySelect 11 (2) (2026)
https://doi.org/10.1002/slct.202505417
Bio-based functionalization of halloysite nanotubes: Rheokinetics and surface modification with epoxidized linseed and soybean oils
Soheil Farshbaf Taghinezhad, Amin Abbasi, Golnoosh Abdeali, Mostafa Ahmadi, Daniel P. Fitzpatrick, Ian Major and Romina PezzoliApplied Clay Science 277 107979 (2025)
https://doi.org/10.1016/j.clay.2025.107979
Selective Hydrogenation of Polyunsaturated Fatty Acid Methyl Esters over Bifunctional Ligand-Modified Pd/MIL-101(Cr) Catalysts
Phuwadon Khenkhom, Chonlada Ritvirulh, Kittisak Choojun, Yardthip Preedawichitkun, Narong Chanlek and Tawan SooknoiInorganic Chemistry 64 (37) 18723 (2025)
https://doi.org/10.1021/acs.inorgchem.5c02268
Novel synthesis of flexible polyurethane foams with high bio-based content derived from waste cooking oil
Damiano Rossi, Irene Anguillesi, Miriam Cappello, Maria Michela Dell’Anna and Maurizia SeggianiScientific Reports 16 (1) (2025)
https://doi.org/10.1038/s41598-025-30126-x
Exploring molecular catalysis in the enzymatic synthesis of biolubricants: A comprehensive review and bibliometric assessment
Francisco Simão Neto, Patrick da Silva Sousa, Rafael Leandro Fernandes Melo, Viviane de Castro Bizerra, Dayana Nascimento Dari, Kaiany Moreira dos Santos, Paulo Gonçalves de Sousa Junior, Jessica Lopes da Silva, Jesús Fernández-Lucas, Francisco Izaias da Silva Aires, Maria Alexsandra de Sousa Rios, Mohammad J. Taherzadeh and José Cleiton Sousa dos SantosMolecular Catalysis 583 115191 (2025)
https://doi.org/10.1016/j.mcat.2025.115191
Electric Vehicles as a Promising Trend: A Review on Adaptation, Lubrication Challenges, and Future Work
Anthony Chukwunonso Opia, Kumaran Kadirgama, Stanley Chinedu Mamah, Mohd Fairusham Ghazali, Wan Sharuzi Wan Harun, Oluwamayowa Joshua Adeboye, Augustine Agi and Sylvanus AlibiLubricants 13 (11) 474 (2025)
https://doi.org/10.3390/lubricants13110474
A Review of Biolubricants: Approach, Challenges, Certification Aspects for Aircraft Applications
Nayana Vallattuthottiyil Thankachan, Krishnapandian Shunmugapriya, Mohanrao Chembu Bhuvaneswari and Anagha SudhakarJournal of Aerospace Sciences and Technologies 83 (2025)
https://doi.org/10.61653/joast.v77i2.2025.1048
A comparative analysis of the emissions and performance of diesel fuel combustion lubricated by jatropha bio-lubricant with MWCNT additive and jojoba bio-lubricant with TiO2 additive
Rajendra Uppar, P. Dinesha and Shiva KumarDiscover Sustainability 6 (1) (2025)
https://doi.org/10.1007/s43621-025-01265-y
Economic Analysis of the Preliminary Design of a Chemical Mini-Plant to Produce Palm Oil Based Estolide Calcium Sulfo-Ole Heavy -duty Bio grease with a Capacity of 36 Tons/Year
Muhammad Luthfi and Sukirno SukirnoTEKNIK 46 (3) 218 (2025)
https://doi.org/10.14710/teknik.v46i3.71079
Yield optimization of nonedible vegetable oil-based bio-lubricant using design of experiments
Rajendra Uppar, P. Dinesha and Shiva KumarEnvironment, Development and Sustainability 26 (11) 29557 (2024)
https://doi.org/10.1007/s10668-024-04529-1
(2024)
https://doi.org/10.2139/ssrn.4777561
Green tribology assessment: A Comprehensive review of bio-lubricants and nano enhancers
Amirmahdi Rahmani, Hesam Khadem Razavi and Masoud Dehghani-SoufiEnergy Conversion and Management: X 24 100794 (2024)
https://doi.org/10.1016/j.ecmx.2024.100794
141 (2024)
https://doi.org/10.1002/9781394173037.ch5
381 (2024)
https://doi.org/10.1002/9781394173037.ch12
291 (2024)
https://doi.org/10.1002/9781394173037.ch10
Waste-Cooking-Oil-Derived Polyols to Produce New Sustainable Rigid Polyurethane Foams
Miriam Cappello, Sara Filippi, Damiano Rossi, Patrizia Cinelli, Irene Anguillesi, Caterina Camodeca, Elisabetta Orlandini, Giovanni Polacco and Maurizia SeggianiSustainability 16 (21) 9456 (2024)
https://doi.org/10.3390/su16219456
Use of vegetable oils as an alternate to naphthenic oil for extension of emulsion styrene butadiene rubber
Shambhu Lal Agrawal, Pankaj Kumawat, Rajnikant Salvi, Jayveersinh Jhala, Jayesh Bhatt and Suresh C AmetaJournal of Elastomers & Plastics 56 (1) 15 (2024)
https://doi.org/10.1177/00952443231209478
Response of some varieties of corn (Zea mays L.) toward applying granular bio-fertilizer on dry land
Ali Ikhwan, Erny Ishartati, Ferdian Enggar Pamungkas and Muhammad Rafi RaidiansyahIOP Conference Series: Earth and Environmental Science 1417 (1) 012001 (2024)
https://doi.org/10.1088/1755-1315/1417/1/012001
Incorporation of Cellulose Nanocrystals into a Cottonseed Oil-Based Network Polymer: Effect on Mechanical Properties
Katherine S. Elmore, Shuaib A. Mubarak, Gregory Schueneman, Yunsang Kim and Santanu KunduACS Sustainable Resource Management 1 (6) 1121 (2024)
https://doi.org/10.1021/acssusresmgt.4c00047
(2024)
https://doi.org/10.21203/rs.3.rs-4857530/v1
PRODUCTION OF BIOLUBRICANT BLEND FROM JATROPHA CURCAS OIL
Mohammed Alhassan, M. N. Almustapha, M. L. Mohammed, A. M. Lawal, M. Adamu and U. ShamsideenFUDMA JOURNAL OF SCIENCES 7 (6) 14 (2024)
https://doi.org/10.33003/fjs-2023-0706-2168
A Review on Biolubricants Based on Vegetable Oils through Transesterification and the Role of Catalysts: Current Status and Future Trends
Sergio Nogales-Delgado, José María Encinar and Juan Félix GonzálezCatalysts 13 (9) 1299 (2023)
https://doi.org/10.3390/catal13091299
Development of bio lubricant from castor oil via chemical softening: An ease towards sustainable substitute
Nishant Chavhan, Amruta Mokashi, Sharda Chandak, Bhushan Chaware, Prasad Bongarde and Sanket BodheMaterials Today: Proceedings (2023)
https://doi.org/10.1016/j.matpr.2023.09.061
Synthesis and Frictional Characteristics of Bio-Based Lubricants Obtained from Fatty Acids of Castor Oil
Paulo Roberto Campos Flexa Ribeiro Filho, Matheus Rocha do Nascimento, Silvia Shelly Otaviano da Silva, et al.Lubricants 11 (2) 57 (2023)
https://doi.org/10.3390/lubricants11020057
Green synthesis of trimethylolpropane triisostearate and triisooleate for usage as bio-lubricants
Majher I. Sarker, Helen Ngo, Brajendra K. Sharma, Karen M. Wagner, Kerby C. Jones and Michael J. PowellTribology International 186 108649 (2023)
https://doi.org/10.1016/j.triboint.2023.108649
Renewable processes of synthesis of biolubricants catalyzed by lipases
Isamayra Germano de Sousa, Gabrielly Ferreira Mota, Antônio Luthierre Gama Cavalcante, Thales Guimarães Rocha, Patrick da Silva Sousa, Jeferson Yves Nunes Holanda Alexandre, José Erick da Silva Souza, Francisco Simão Neto, Francisco Thálysson Tavares Cavalcante, Ada Amélia Sanders Lopes and José C.S. dos SantosJournal of Environmental Chemical Engineering 11 (1) 109006 (2023)
https://doi.org/10.1016/j.jece.2022.109006
Experimental investigation of the production of biolubricant from waste frying oil
Abdi Moushab Mohamed, Yalçin Zehra Gülten and Dağ MustafaBiomass Conversion and Biorefinery 13 (7) 6395 (2023)
https://doi.org/10.1007/s13399-023-03869-8
A Review on Bio-Lubricants as an Alternative Green Product:Tribological Performance, Mechanism, Challenges and Future Opportunities
Anthony Chukwunonso Opia, Mohd Fadzli Bin Abdollah, Mohd Kameil Abdul Hamid and Ibham VezaTribology Online 18 (2) 18 (2023)
https://doi.org/10.2474/trol.18.18
Optimization of dual transesterification of jatropha seed oil to biolubricant using hybridized response surface methodology (RSM) and adaptive neuro fuzzy inference system (ANFIS)-genetic algorithm (GA)
Callistus N. Ude, Christopher N. Igwilo, Kenechi Nwosu-Obieogu, Patrick C. Nnaji, Collins N. Oguanobi, Ndidi F. Amulu, Cordelia Nneka Eze and Uchenna C. OmenihuSustainable Chemistry for the Environment 4 100050 (2023)
https://doi.org/10.1016/j.scenv.2023.100050
149 (2023)
https://doi.org/10.1016/B978-0-323-91662-2.00019-3
Tribological performance evaluation of organic polymer as additives in vegetable oil using steel materials
Anthony Chukwunonso Opia, Mohd Fadzli Bin Abdollah, Abdul Hamid Mohd Kameil, Samion Syahrullail, Audu Ibrahim Ali, Stanly Chinedu Mama, Abdelgade Agilah Saleh, Ahmed Sule and Charles N JohnsonProceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 237 (12) 2178 (2023)
https://doi.org/10.1177/13506501231198287
Vegetable oil extended emulsion styrene butadiene rubbers for passenger car radial tire tread application
Shambhu Lal Agrawal, Abhijit Adhikary, Jayesh Bhatt and Suresh C AmetaJournal of Elastomers & Plastics 55 (8) 1251 (2023)
https://doi.org/10.1177/00952443231201968
1 (2023)
https://doi.org/10.1109/SEB-SDG57117.2023.10124632
1451 31 (2023)
https://doi.org/10.1021/bk-2023-1451.ch002
A review of synthesis of esters with aromatic, emulsifying, and lubricant properties by biotransformation using lipases
Renata N. Vilas Bôas and Heizir F. de CastroBiotechnology and Bioengineering 119 (3) 725 (2022)
https://doi.org/10.1002/bit.28024
Tribological Performance of 100Cr6/8620 Steel Bearing System under Green Oil Lubrication
Ricardo Ortega-Álvarez, María T. Hernández-Sierra, Luis D. Aguilera-Camacho, Micael G. Bravo-Sánchez, Karla J. Moreno and J. Santos García-MirandaMetals 12 (2) 362 (2022)
https://doi.org/10.3390/met12020362
A review on properties, challenges and commercial aspects of eco-friendly biolubricants productions
Uzair Ahmad, Salman Raza Naqvi, Imtiaz Ali, Muhammad Naqvi, Saira Asif, Awais Bokhari, Dagmar Juchelková and Jiří Jaromír KlemešChemosphere 309 136622 (2022)
https://doi.org/10.1016/j.chemosphere.2022.136622
Bioprocess development for biolubricant production using non-edible oils, agro-industrial byproducts and wastes
Madhavi Perera, Jinyong Yan, Li Xu, Min Yang and Yunjun YanJournal of Cleaner Production 357 131956 (2022)
https://doi.org/10.1016/j.jclepro.2022.131956
Optimization and lubrication properties of Malaysian crude palm oil fatty acids based neopentyl glycol diester green biolubricant
Nurazira Mohd Nor, Nadia Salih and Jumat SalimonRenewable Energy 200 942 (2022)
https://doi.org/10.1016/j.renene.2022.09.112
Palm oil as a biolubricant: Literature review of processing parameters and tribological performance
G. Durango-Giraldo, C. Zapata-Hernandez, J.F. Santa and R. Buitrago-SierraJournal of Industrial and Engineering Chemistry 107 31 (2022)
https://doi.org/10.1016/j.jiec.2021.12.018
Energy from biomass and plastics recycling: a review
Samuel Oluwafikayo Adegoke, Adekunle Akanni Adeleke, Peter Pelumi Ikubanni, Chiebuka Timothy Nnodim, Ayokunle Olubusayo Balogun, Olugbenga Adebanjo Falode, Seun Olawumi Adetona and Sanjay Kumar ShuklaCogent Engineering 8 (1) (2021)
https://doi.org/10.1080/23311916.2021.1994106
Recent Trends in Manufacturing and Materials Towards Industry 4.0
Siti Nur Qamarina Ahmad Jumali, Zaidi Embong, Erween Abd Rahim, Zazuli Mohid and Syahrullail SamionLecture Notes in Mechanical Engineering, Recent Trends in Manufacturing and Materials Towards Industry 4.0 257 (2021)
https://doi.org/10.1007/978-981-15-9505-9_25
Biodiesel and biolubricant production from different vegetable oils through transesterification
José María Encinar, Sergio Nogales and Juan Félix GonzálezEngineering Reports 2 (12) (2020)
https://doi.org/10.1002/eng2.12190
A review of recent advances in tribology
Yonggang Meng, Jun Xu, Zhongmin Jin, Braham Prakash and Yuanzhong HuFriction 8 (2) 221 (2020)
https://doi.org/10.1007/s40544-020-0367-2
Sulfur-based polymers by inverse vulcanization: a novel path to foster green chemistry
Amin Abbasi, Mohamed Mahmoud Nasef and Wan Zaireen Nisa YahyaGreen Materials 8 (4) 172 (2020)
https://doi.org/10.1680/jgrma.19.00053
Potential of using polyethylene as viscosity enhancer of palm oil to use as a lubricating oil
TKKS Pathmasiri and GIP PereraAdvances in Mechanical Engineering 12 (11) (2020)
https://doi.org/10.1177/1687814020970745
89 (2020)
https://doi.org/10.1016/B978-0-12-820236-4.00004-0
Optimization of response surface methodology by D-optimal design for synthesis of food-grade palm kernel based biolubricant
Murad Bahadi, Mohamad Firdaus Yusoff, Jumat Salimon and Darfizzi DerawiIndustrial Crops and Products 139 111452 (2019)
https://doi.org/10.1016/j.indcrop.2019.06.015
Copolymerization of vegetable oils and bio-based monomers with elemental sulfur: A new promising route for bio-based polymers
Amin Abbasi, Mohamed Mahmoud Nasef and Wan Zaireen Nisa YahyaSustainable Chemistry and Pharmacy 13 100158 (2019)
https://doi.org/10.1016/j.scp.2019.100158
Study on The Potential of Waste Cockle Shell Derived Calcium Oxide for Biolubricant Production
Faridah Ghafar, Norzahir Sapawe, Emma Dzazita Jemain, Amin Safwan Alikasturi and Norazmmi MasripanMaterials Today: Proceedings 19 1346 (2019)
https://doi.org/10.1016/j.matpr.2019.11.148
The Full or Partial Replacement of Commercial Marine Engine Oil with Bio Oil, on the Example of Linseed Oil
Małgorzata MalinowskaJournal of KONES 26 (3) 129 (2019)
https://doi.org/10.2478/kones-2019-0066