Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

Performance analysis of palm tree microfibers in concrete

Mohammad Hany Yassin, Rana Ezzdine Lakys, Zein-Eddine Merouani, Adel Jumah and Mohamad Hussein Farhat
Scientific Reports 15 (1) (2025)
https://doi.org/10.1038/s41598-024-84111-x

Fire Resistance of Foamed Concrete for Discontinuous Partition Filling

Paweł Sulik, Bożena Kukfisz, Adriana Dowbysz and Agata Oszczak-Nowińska
Materials 17 (6) 1315 (2024)
https://doi.org/10.3390/ma17061315

Thermal Conductivity in Concrete Samples with Natural and Synthetic Fibers

Lucas Daza-Badilla, René Gómez, Ramón Díaz-Noriega, Siva Avudaiappan, Krzysztof Skrzypkowski, Erick I. Saavedra-Flores and Waldemar Korzeniowski
Materials 17 (4) 817 (2024)
https://doi.org/10.3390/ma17040817

Physicomechanical and Hygrothermal Characterization of a Sugarcane Waste / Spent Coffee Grounds Composite for Buildings

Tala Moussa, Chadi Maalouf, Akram Ghanem, Christophe Bliard, Boussad Abbes, Céline Badouard, Mohammed Lachi, Lina Bufalino, Fabien Bogard and Guillaume Polidori
Waste and Biomass Valorization 15 (9) 5431 (2024)
https://doi.org/10.1007/s12649-024-02537-w

Thermal performance and life cycle analysis of 3D printed concrete wall building

Akilesh Ramesh, Satheeskumar Navaratnam, Pathmanathan Rajeev and Jay Sanjayan
Energy and Buildings 320 114604 (2024)
https://doi.org/10.1016/j.enbuild.2024.114604

Synergistic Effects of Polypropylene Fibers and Silica Fume on Structural Lightweight Concrete: Analysis of Workability, Thermal Conductivity, and Strength Properties

Zehra Funda Akbulut, Eva Kuzielová, Taher A. Tawfik, Piotr Smarzewski and Soner Guler
Materials 17 (20) 5042 (2024)
https://doi.org/10.3390/ma17205042

Development of Foam Fly Ash Geopolymer with Recycled High-Density Polyethylene (HDPE) Plastics

Emmanuel M. Atienza, Richard M. De Jesus and Jason Maximino C. Ongpeng
Polymers 15 (11) 2413 (2023)
https://doi.org/10.3390/polym15112413

Research and Application Progress of Vegetation Porous Concrete

Chang Liu, Yangyang Xia, Jianguo Chen, Kai Huang, Jing Wang, Chaojie Wang, Zhuojie Huang, Xunhuai Wang, Cong Rao and Mingsheng Shi
Materials 16 (21) 7039 (2023)
https://doi.org/10.3390/ma16217039

Lightweight foamed concrete for houses in Jordan

Rabab Allouzi, Hatem Almasaeid, Amer Alkloub, Osama Ayadi, Rawan Allouzi and Ramia Alajarmeh
Case Studies in Construction Materials 18 e01924 (2023)
https://doi.org/10.1016/j.cscm.2023.e01924

Effect of Foaming Agent, Binder and Density on the Compressive Strength and Thermal Conductivity of Ultra-Light Foam Concrete

Jacek Gołaszewski, Barbara Klemczak, Aneta Smolana, Małgorzata Gołaszewska, Grzegorz Cygan, Christoph Mankel, Ignacio Peralta, Frank Röser and Eduardus A. B. Koenders
Buildings 12 (8) 1176 (2022)
https://doi.org/10.3390/buildings12081176

Thermal Performance Simulation of Eco-Friendly Lightweight Foamed Concrete Incorporating Palm Oil Fuel ash and Eggshell Powder Using ABAQUS

Ashfaque Ahmed Jhatial, Wan Inn Goh, Touqeer Ali Rind and Aneel Kumar
Silicon 14 (3) 1263 (2022)
https://doi.org/10.1007/s12633-020-00907-2

State of the Art Review of Reinforcement Strategies and Technologies for 3D Printing of Concrete

Zhengyu Wu, Ali Memari and Jose Duarte
Energies 15 (1) 360 (2022)
https://doi.org/10.3390/en15010360

A Review on Failure Modes and Cracking Behaviors of Polypropylene Fibers Reinforced Concrete

Jawad Ahmad, Dumitru Doru Burduhos-Nergis, Mohamed Moafak Arbili, Saleh M. Alogla, Ali Majdi and Ahmed Farouk Deifalla
Buildings 12 (11) 1951 (2022)
https://doi.org/10.3390/buildings12111951

Effect of Steel Fibre Reinforcement on Flexural Fatigue Behaviour of Notched Structural Concrete

Jose A. Sainz-Aja, Laura Gonzalez, Carlos Thomas, Jokin Rico, Juan A. Polanco, Isidro Carrascal and Jesús Setién
Materials 14 (19) 5854 (2021)
https://doi.org/10.3390/ma14195854

Mechanical and Thermal Properties of Synthetic Polypropylene Fiber–Reinforced Renewable Oil Palm Shell Lightweight Concrete

Leong Tatt Loh, Ming Kun Yew, Ming Chian Yew, Jing Han Beh, Foo Wei Lee, Siong Kang Lim and Kok Zee Kwong
Materials 14 (9) 2337 (2021)
https://doi.org/10.3390/ma14092337

Mechanical Properties and Thermal Conductivity of Fly Ash-Based Geopolymer Foams with Polypropylene Fibers

Ni Komang Ayu Agustini, Andreas Triwiyono, Djoko Sulistyo and S Suyitno
Applied Sciences 11 (11) 4886 (2021)
https://doi.org/10.3390/app11114886

Effect of Polypropylene Fibre on the Strength of Concrete Incorporating Rice Husk Ash

Karim Bux Phulpoto, Ashfaque Ahmed Jhatial, Muhammad Jaffar Memon, Abdul Razzaque Sandhu and Samiullah Sohu
Journal of Applied Engineering Sciences 10 (1) 69 (2020)
https://doi.org/10.2478/jaes-2020-0011

Fibre-Reinforced Foamed Concretes: A Review

Mugahed Amran, Roman Fediuk, Nikolai Vatin, Yeong Huei Lee, Gunasekaran Murali, Togay Ozbakkaloglu, Sergey Klyuev and Hisham Alabduljabber
Materials 13 (19) 4323 (2020)
https://doi.org/10.3390/ma13194323

Research of structuring processes of non-autoclave foam concrete with introduction of mineral additives

N Mashkin and E Bartenjeva
IOP Conference Series: Materials Science and Engineering 451 012018 (2018)
https://doi.org/10.1088/1757-899X/451/1/012018

Effect of steel fibres on the compressive and flexural strength of concrete

Ashfaque Ahmed Jhatial, Samiullah Sohu, Nadeem-ul-Karim Bhatti, Muhammad Tahir Lakhiar and Raja Oad
International Journal of ADVANCED AND APPLIED SCIENCES 5 (10) 16 (2018)
https://doi.org/10.21833/ijaas.2018.10.003